PlanetMinis Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-16 of 16 Results
  1. Chinese/Import Minis - General Discussion
    I am looking for some advice I am new to owning a pitbike and I have slight oil leak come out of the nut in picture 1 anyone no why I no they have got a seal in them but not sure what they are called to get a new one also what gose in the nut in picture 2 and in picture 3 what's the nut call...
  2. Honda CRF110
    first off delete this if it’s a stupid or already talk about thread. i looked and i’m completely clueless when it come to pitbikes. i race 250 and 450 B and collegeboy but am just finding interest in pitbikes. so for someone with a bone stock ‘21 crf110 what would be the first upgrades/etc to...
  3. Chinese/Import Minis - General Discussion
    Hey guys, so I'm super new to pit bikes, need some couple questions answered if possible First off, I can't get the thing to idle right any more even with adjusting the screws, won't idle steady, Secondly I bogs down with anymore then half throttle, so what size carb is best for mine? And...
  4. KLX110, DRZ110, TTR90
    Hey guys im new here so please bare with me and my little knowledge about bikes. My question was that I have a KLX 110 L 2015 and was cleaning the carb and was putting everything back together when I saw a random wire/rubber cable thingy with a metal clamp on the end and was not sure where this...
  5. Chinese/Import Minis - General Discussion
    So i just bought my 160cc YX 2V engine today, But what oil to i put in it i can't find information about it anywhere. i was thinking 20w50 correct me if im wrong. and do i buy mineral or semi/full synthetic? thanks in advance. :)
  6. Honda CRF70
    Hello everyone, I own a 2005 CRF 70 and i would like to put the 10" dax rims and hubs into it. Has anyone done that yet? Are there any kits available for this kind of conversion? In the front everything fits (with Takegawa front end). But in the rear i'm struggling with the braking system...
  7. KLX110, DRZ110, TTR90
    just pulled my motor on 2006 klx 110 think its the output shaft. cylinder is off, both covers are off im getting ready to split the case but I want to know if I can check my output shaft before I split the case. where is the output shaft???
  8. KLX110, DRZ110, TTR90
    i have a klx110 165cc big bore kit would i need to modify the cases in anyway to install it?
  9. Chinese/Import Minis - General Discussion
    I just have a couple questions regarding the 125tr ... i have a 125sr and love it and i am planning on upgrading to the tr just for the bigger plastics and so on but here are my concerns 1. are the cases parts cylinders clutches and so and so on the same on the tr vs the sr because in the pics...
  10. Honda CRF150R And CRF150F
    What's up guys! I've been wondering for a while now if anyone knows or has tried haha, fitting a crf150r motor into a 65 frame? Cause since Husqvarna came out with the tc 65's I've wanted to swap motors out and try to make a sweet little street legal supermoto similar to this 450! Thanks guys!
  11. Chinese/Import Minis - General Discussion
    Hi guys, I recently picked up 2 pit bikes, 1 being an automatic SSR 125. It didn't start when I got it so I did the normal things like clean out the carb and put new gas in. I then got a new spark plug and installed that and now the bike will turn over but not start. It has compression and a...
  12. Honda CRF70
    Hey guys I recently put a 88 bore kit in my crf70 because it was due for a rebuild when it was a 70 since then it has been running far from nice and it seems to be the exact same as my friends 70. I don't think that it's right and I'm no professional at jetting. I am running the stock pipe due...
  13. Pitster Pro
    Hey guys!! I just got my first pitster pro, nice bike, but lately I notice when shifting gears ill get a false neutral?? And also sometimes shifting gear is unsuccessful (for example: when shifting from 3rd to 2nd, it will stay in 3rd. After the second or third try it will shift into second?)...
  14. Z50, CT70 and JDM Monkeybikes
    Hi I am fairly new to this forum so please tell me if this is out of place, or however it works.:confused: I have been searching for days on these two topics and just couldn't find one, so i decided to start a thread on this forum. I plan on buying all these part from...
  15. Chinese/Import Minis - General Discussion
    Yesterday while riding my ssr 125 the suspension came apart. i haven't had the chance yet to try to fix it but before i do i wanna get some support from you guys as yall are experts on this stuff. so the bolt came out of its bottom holding and the spring coil almost slid off. this cause the...
  16. Chinese/Import Minis - General Discussion
    I have an old Chinese quad from when I was younger its a 110 but its pretty fast and fun but I wrecked it and the quad is pretty much totalled but I'm 90% sure the engine is still good even if I may need to rebuild its still good, so I'm thinking of putting it into a pitbike but I can't find...
1-16 of 16 Results
Top