PlanetMinis Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 41 Results
  1. CRF50/CRF70 Parts For Sale
    1200$ Marzocchi’s with the 65 front disk set up Seals need to be replaced. top clamp is all marzocchi’s, The part that pushes the bars out forward are something I put on there for more leg room. bars and front fender not included Menifee CA. 92584 steven 951-566-7944
  2. Bikes and Parts Wanted - All Makes
    Is anyone selling a set of bud racing kx65 forks on here? To fit a klx110. I know they are hard to find but thought i would chance my luck here… thanks. Also if anyone has a long travel tbr swinger and race tech shock I may consider also 👍🏼
  3. Chinese/Import Minis - General Discussion
    Bought a parts bike without realizing it was a 170 not a 125. Any way I could swap the suspension onto my 125? I am able to fabricate certain things so I'm willing to do the work, but I was curious if anyone knew if it were down right impossible.
  4. Bikes and Parts Wanted - All Makes
    I know it’s a long shot but if anyone has a set of speed forks not being used I’ll buy them! 262-370-nine93nine Thanks!
  5. Honda CRF110
    I can't seem to find any front end kits for my 2018 crf110. Can only seem to find crf70 and klx110 aftermarket front suspension/front end kits. What are you guys running? Hoping someone can point me in the direction of aftermarket forks or ideas! Thanks
  6. Z50, CT70 and JDM Monkeybikes
    I recently bought the fork kit with disc brake from ebay. It didn't come with any instructions, but I was able to get most of it done (I think). My questions are if it's done right. Appreciate any help in advance. First one is on the speedo gear. First I noticed it rubs on the hub quite a bit...
  7. KLX110, DRZ110, TTR90
    I'm 140lbs and an agressive rider. I use to race in my teens but due to an injury sort of retired from that. I stil lhave a crf250 when I go to tracks occasionally but I love to ride around my small klx 110 in the woods and around the farm. The problem is the shock broke completely and I...
  8. 2 Stroke Pitbikes
    85 Tri-Zinger help with mods. Tri-Zinger hub swap? Tri-Zinger Fork swap? Hub Swap Has any one tried to swap Tri-Zinger 60 rear hubs for hubs with a 4x100 bolt pattern?? Or Swapped a different set of Yamaha hubs? 4x100 wheel adapters? Spline adapters? Any help? Fork swap Has any one tried to...
  9. Z50, CT70 and JDM Monkeybikes
    I picked up 4 ct70s frames with quite a bit of parts. Fast forward putting 1 together and the front wheel is not centered, brake side is 1 inch and the other is 5/8 from the forks. I measured and both halfs are exactly the same width, 1 5/8". Is one half supposed to be wider than the other half?
  10. Misc Items for Sale
    They are used only three times. $25 starting bid. shipping from Palmer MA [email protected]
  11. Vintage Honda XR75 and JDM Vertical Motors
    Hey i am currently restoring a Xr 75 1978 model. I would like to lift it since i am quite tall. Could someone please tell me which forks and rear shocks i should buy that would bolt right on. another question would it be wise to buy some larger wheels as well or would the stock ones be fine? Thanks
  12. Bikes and Parts Wanted - All Makes
    Looking to buy stock forks for klx 110 or any 110. Kx60 forks would work also. If this is in the wrong forum please let me know and I'll take it down. New to the site
  13. KLX110, DRZ110, TTR90
    Hey guys, is there a way TTR90 forks will fit on a klx 110? Both bikes have a 4.3 inch travel distance on the forks. I measured the fork that wasn't bent on my klx and got 2 foot and 11/16 of an inch. I was in a wreck with one of my friends and bent one of my forks really bad. I looked on eBay...
  14. Honda CRF70
    Hi everyone, I have read just about every suspension thread I could find and am still needing some key information. I have an xr70. I would like to bolt on a front end kit with forks that have somewhere around 7-8 inches of travel. Can 110 gpx kits easily bolt on to a 70? how could I make it...
  15. Import/Chinese Parts for Sale
    I am selling my Marzocchi forks price is 35 for shipping 115 for the forks them selves Or your best offer there are no leaks brand new fork guards there are a couple minor scratches and a little surface rust on bolts. contact me (walker) at any time at 817-223-6120 or [email protected]
  16. Roost Area
    Marzocchi Saved from Liquidation ! 12/30/2015: :biggthumpup: :dance: :grouphug: :headbang::hump::lmao::nana: :wiggle: :banana::beerchug: "The Christmas and year’s end bring joy to the employees of Marzocchi. Around 70 employees will keep their jobs and remain in the city of Zola Predosa, as...
  17. Chinese/Import Minis - General Discussion
    Me again Margaret, This has been quite the month for my [formerly-bulletproof] MedinaClone, heh. Thanks to tony13tyamaha for his help, first of all, who kindly put me on the right track. But does anyone know where to buy an actual rebuild kit or know actual bushing/seal dimensions of the...
  18. Bikes and Parts Wanted - All Makes
    Looking for a complete 50 front end. Prefer to have adjustable forks and a disk break setup but really open to anything. Trying to stay under 300 unless someone's got a deAL on a new style 35mm zokes setup. Let me know what you got. Thanks! You can also text me anytime 4407422889
  19. Chinese/Import Minis - General Discussion
    Hey everyone, I'm looking to upgrade the suspension on my SSR 125. The stock suspension is too soft and riding on trails is a little rough. I had a few questions about what parts to buy. I weigh about 150lb for reference. For the forks I want to buy these springs from TB and use heavier fork...
1-19 of 41 Results