PlanetMinis Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-8 of 8 Results
  1. Chinese/Import Minis - General Discussion
    Need help with adding lights I have a 07 baja dr90 (china) it only had a 3 wire stator so I ordered a new magneto one that had a lighting coil, wired it to a switch and rectifier and a 18w led light bar. Now my problem is the lights only turn on and brighten up during idle when the throttle is...
  2. Z50, CT70 and JDM Monkeybikes
    Hows it going having a problem wiring up my piranha 90cc 4 speed semi auto to my 1970 CT70. I am using Stock harness with TBOLT 6 volt type1 Rectifier to try to obtain a working system... I so far believe i have it wired correctly... everything worked... I had all the lights running... refer to...
  3. Z50, CT70 and JDM Monkeybikes
    I'm cleaning up the rectifier on my z50a k1 and I don't think its put together correctly. Does someone have a schematic or can tell me the order of the washers, spacers plates and wires? Also can someone explain the science behind how something as simple as two metal plates actually converts...
  4. Z50, CT70 and JDM Monkeybikes
    All set thanks!
  5. KLX110, DRZ110, TTR90
    Ok so I am having an electrical problem with my TTR110 and I was wondering if anyone has experienced anything similar on other 110's or TTR 110's/90's/50's and they could help me out. I will start from the beginning. A short while ago (early april) the electric start on my 2008 ttr110 quit...
  6. CRF50
    So, I am in charge of a group of 12 guys who have 'adult-fitted' their crf50's for parades in Saint Louis, MO. We have installed electric, and accessories so that our bikes look like little police motorcycles. Sirens, PA, Lights, wig-wag, the works. As our group expands and adds more people...
  7. Z50, CT70 and JDM Monkeybikes
    I spent quite awhile rebuilding an old pickup truck. On the truck my battery was wired/grounded directly to the frame. This meant that any wire from the battery was "hot" even in the key off position, and if it grounded on the frame I would have a short. Or it meant certain things might work in...
  8. Maintenance
    I would appreciate some insight on an electrical problem I am having with two z50's (AK1). Firstly, I built these from scratch. They run well. I purchased the wiring harness from CHP and wired almost everything as the original diagrams. However, I do remember that I did wire the white cable on...
1-8 of 8 Results
Top