Search Results for ‘clutch’

I am pretty new to this scene and am addicted just seeing how happy my son gets when I tell him we are oing riding.. . My 9 year old started riding last year. I found a 2011 CRF70 in good shape.. he was having fun until his friend let him ride his TTR110.....The 70 is a good size for him...

Everything goes together right and fits good did have problems with my case going on so I cut the hook thing off and kept it there as a spacer on the splined part, but when I tighten everything down my shifter is hard to move. Also cant get it out of gear no ideas what that could be (also just...

Hello All...it's been a while, and I'm now on a new project bike, as my daughter has outgrown her TTR50. The new project is a TTR90. Since the assembly I'll be discussing is identical to the TTR110 (based on schematics), I'm hoping owners of either bike may be able to help. I'm stripping the...

I have an SSR 125cc fully manual pit bike and my clutch is not disengaging all the way when i want to switch gears (such as put it into first gear). If i tighten the cable all the way and pull the clutch lever all the way in (which takes a lot of force to do). I am suspecting the guy before me...

I am experiencing Neutral & 1st gear working, but the bike isn't shifting into any lower gear (no 2nd or 3rd). I think the drum stopper may be in the incorrect position, due to the shift arm being in the wrong position. I have read on thumppertalk that the flat side should be vertical and...

Does anybody have a Service manual for to TTR50E they could email me? I just bought one site un seen I was told it was all good to go but something was wrong with the batt or starter but it would bump start. When I got it I found the neutral Wire was unhooked so the starter problem was an easy...

What's up guys. My name is Wes and It's been a while since I've been on here so I've missed a bunch and haven't stayed up on much. Motors - gpx125 with inner rotor kit vm22 carb Stock lifan 138/ knockoff 125? With inner rotor kit. Vm22 carb Well this is why I'm here... My Gpx 125...

So long story short, my brother rode my bike and cracked the clutch cover and tried to fix by putting new cover on but gave up after it wouldn't go back together. Left it to me but am having trouble figuring out what I am doing wrong. 2003 DRZ 110 bone stock. The bike goes into gear fine and...

Hello All I have been checking out this forum for a while now and every time I am looking for an answer it seems to be on here somewhere. Well this time I could not find the answer so I thought I would do a quick post and see what everyone thinks. I am working on my first z50 build and I...

LXR clutch assembly Problem So long story short, I have a 155z Motor in my LXR, my trans decided to sh!t its self out the drain plug so i had to split the case and all that fun stuff, i got the new gear stacks in, got everything together, motor in the bike, and running prime. I had the clutch...

Ok pitbike gurus i have an easy one for you today. I am finishing up a cafe racer moped build that i am using a xr50 motor for. I have already rebuilt the top end with a new 88cc BB kit with race cam and stock head. Everything else is stock. The clutch is completely stock and slips very badly...

I got a FORZA 125cc pitbike and interms of frame and stuff its pretty much the same as a SSR 125 TR. anyway the bike is about near 2 weeks old and have about 8 hours of riding on it so far from offroad and on paved roads. I used castrol 4t 15-50W NON SYNTHETIC oil and it is on its third oil...

So I have another problem haha, Give some info on my bike first just got bike for cheap 2007 klx110. Anyways the timing chain ended up eating chain guide and jamming inside broke the lower cam chain guide groove and bottom end was knocking as well as wrist pin had some serious play in it this...

Hey guys I have an 2007 KLX 110 with a Takagawa hydrolic clutch kit and I bought this thing blown up. So I rebuilt the motor and everything with that is good but the clutch is not working. I tried bleeding it and it didnt have that much pressure so I got a magura hydrolic master and set that up...

So theres almost no friction zone and i've already replaced the plates and springs with a Barnett clutch. I've got the free play adjusted at the lever correctly but it only starts grabbing like 1/2 inch before the clutch is all the way out. is there another adjustment somewhere else?

Anybody who has the big gear to mount the clutch plate housing onto for sale? i need it urgent but i can't seem to find one in good condition. I am also looking for parts like the oil filter cover and the clutch cover. if you have anything for this clutch for sale let me know :D A sample...

Hello guys I'm looking for an engine to fit a crf70 style frame and I would like it to be fully manual four speed and atleast 110cc. I want something to go fast but Im not looking to spend too much where can I find a good cheap fast engine?

Looking to get a takegawa clutch kit. New or used