PlanetMinis Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. Chinese/Import Minis - General Discussion
    I was goolging and I found that the yx is a klx based motor and the lifan is a crf based motor, my question is can I use a yx head on a lifan cylinder, or can I swap the lifan head and cylinder to a yx and have no issues?(cam would be swapped). Other question is can I use a crf 150 head and...
  2. Chinese/Import Minis - General Discussion
    I've been reading around and heard some of the Kitaco IRK copies don't have timing marks. Anyone have any suggestions on how to time it? I don't prefer to have bent valves. :D Thanks in advance!
  3. Roost Area
    I have a 155z Chinese engine. The chinese lighting coils put out way too little power (35w) to power a light strong enough to be useable for the speeds at which I travel. I found a 100w unit at 00racing, but they won't ship to the states. Can I use a 100w unit made for a crf50 or xr50 if I use a...
  4. Chinese/Import Minis - General Discussion
    I ride an SSR110 till I finish my CRF50 build, I decided to change the fork oil tonight (to a heavier oil) and thought it would be really slick if I pulled the plugs out of the bottom of the fork and let them drain for a while beforehand (because I didn't know what I was doing, servicing forks...
  5. Chinese/Import Minis - General Discussion
    I ride an SSR110 till I finish my CRF50 build, I decided to change the fork oil tonight (to a heavier oil) and thought it would be really slick if I pulled the plugs out of the bottom of the fork and let them drain for a while beforehand (because I didn't know what I was doing, servicing forks...
1-5 of 5 Results
Top