PlanetMinis Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-8 of 8 Results
  1. Honda CRF70
    Put a new carb on my crf 70 and it has a quite high idle. It is like someone is holding the throttle open. Adjusted pilot screw and nothing worked. I believe that the throttle cable has a kink and is not allowing the throttle sleeve to be as far into the carb as it should be. There is quite a...
  2. KLX110, DRZ110, TTR90
    So my son's ttr90 was running a little sluggish and didn't wanna throttle without dying, so we took the carb off and cleaned it out and put it back together. Well the issue now is that the when it starts it runs wide open. The throttle doesn't return, like there's no tension on the cable, so...
  3. KLX110, DRZ110, TTR90
    Can not get this thing to run right at all.. currently have 52 pilot and 125 main it will idle but high. An will cut off randomly. Sometimes its low idle. Sometimes wont even idle. Air screws 1 out to 1.5 out. Where should i start with idle screw? HELP!
  4. Chinese/Import Minis - General Discussion
    I bought the gpx 155ho complete motor kit to put in my SDG107 frame. I’m having some trouble with the angle of the intake manifold and the carb either hitting the frame or the motor. If I put it straight back the top of the carb hits the frame, if I try to turn it the bottom of the carb hits the...
  5. CRF50
    Hey Guys....new subscriber here. Just trying to get our XR50 in top shape. It sat for a couple of years with some really crappy gas in it. We took the carb apart and gave it a really good cleaning; took out all the jets, all the little springs and hardware with the float, and just made sure...
  6. KLX110, DRZ110, TTR90
    New here, Just got a 2012 KLX110L this past week and it has a weird idle to it. I have messed around with the idle adjustment a little bit and cant seem to get it to idle correctly. At idle the bike revs up a little bit and almost dies then revs back up. When it almost dies you can hear it...
  7. Bigger Minis Forum
    Hello everyone, I was looking around but didn't find any info for my KLX. I am upgrading to a 170cc big bore and am getting a Pro Circuit t-4 slip on exhaust. I was wondering what kind of jets I should use. If yall have any info on what you use that would help so much, thanks.
  8. Chinese/Import Minis - General Discussion
    Recently picked up a coolster f3 jumper. I've heard a lot of bad reviews but I got it for a good price and seems to be good quality, comparable to the pitsters I've had. Well see how it lasts when I get it running! The previous owner said he replaced the head gasket and carb before I got it and...
1-8 of 8 Results
Top