110

just picked up a pitster pro xjr110. Wanted to get some suggestions for what to upgrade. Also wanted to see if anyone knows what parts fit. It has 26mm carb, Planning to get a bigger jet. Was thinking about a bigger rear sprocket, it’s already 39 teeth. Also some stiffer springs in the forks...

I was wondering if anyone had a fmf4.1,PC TI4 or a bbr m2 exhaust for my 110 before i just go buy a new one but will pay full price for one and that's in good shape

New to the forum here. Looking for a 2018 or older crf110 rear shock. Can't seem to find any that are a stock length and similarly stiff

My efi build.

bent my rim pretty bad to where i tire works but barely grabs the bead, plan on putting a enduro type tread and am looking for another stock wheel or if they make aluminum wheels for stock setup

Hey guys I just recently picked up a 19 KLX110 after riding it around the neighborhood just to break it in a little I've come to realize I definitely need to upgrade the suspension due to my height and weight. For the front, I will most likely go with the BBR Springs and Dampening Rods, but when...

Selling my 03 110 street legal frame because i built and plated a klx110l. I live in Tennessee where i am able to tag and title dirt bikes. i have a clean title, plate, and reg. frame is straight and no issues see pics. i can ship if needed, 400 local p/u or 450 shipped!!! 423/800/1414 located...

The rear wheel on my 2009 ttr 110 keeps popping tubes and is warped. I am looking for a replacement wheel stock or aftermarket. If anyone has one that would fit and also line up with my brake assembly please email, text, or message me through here. 207-449-9042 thank you my name is Eric Does...

Hi guys, I got the TBolt big bore kit for my drz110. I have a decent bog from idle and was curious if that means its too rich or lean for pitbikes? I know how to jet big bikes 4 stroke and 2 stroke but not too familiar when it comes to smaller 4 strokes. Any else have this kit and what jetting...

I have a 2007 KLX 110 10 year old stock swingarm. I purchased a new 270mm piranah shock for it and wanted to change out the swingarm bearings, well that didn't go as planned. Now I have to look for a new swingarm. The OEM swingarms are very expensive, so I was looking for aftermarket swingarms...

I'm 140lbs and an agressive rider. I use to race in my teens but due to an injury sort of retired from that. I stil lhave a crf250 when I go to tracks occasionally but I love to ride around my small klx 110 in the woods and around the farm. The problem is the shock broke completely and I...

SOLD! But I do not see how to delete the thread.

Up for sale is my Kawasaki KLX 110 Pit Bike (actually a 155cc with the motor work). I have setups for both dirt and supermoto for it. It is an awesome, super-fast, reliable bike that is ready to ride and has a ton of nice upgrades/extras that I’ve outlined below. This bike was built from the...

just pulled my motor on 2006 klx 110 think its the output shaft. cylinder is off, both covers are off im getting ready to split the case but I want to know if I can check my output shaft before I split the case. where is the output shaft???

I am in need of (2) KLX 110 STOCK CDI BOXES shipped to michigan

Looking for a stock klx 110 rear wheel do not need the brake assembly or anything just a wheel to have as a backup

Has anyone found a decent way to move the air filter to a more protected location on the 110? It sticks out quite a bit... Might be fine for track riding but it just won't do for single track.

just purchased a little pit bike. 2004 flywing frame (seat says mx) sxm 49cm head but a honda gb4 crankcase. MY QUESTION: CAN I BOLT A BIGGER SIZE HEAD ONTO THE HONDA CRANKCASE? if so what size and make will directly bolt on? maybe a 70, 100, 110, 150cc maybe? thanks in advance for any info

purchased this as an impulse buy before doing research on it and what i needed. Ended up going with a different option. its still wrapped in the packaging that i received it in...just looking to get my money back out of it. Paid 650, asking 600 obo. email [email protected] or text (805) 591-9455...

I have a 2011 Klx 110l with full two bros pipe, pro taper bars, and uni air filter. Im questioning what i should do next so tell me your suggestions. (not looking to do anything huge such as bore kits, etc.)