PlanetMinis Forums banner

Search results

1-20 of 197 Results
  1. Reeg mx steering bearings HELP

    Instead of searching for what appears to be non-existent bearings, why not use the 32005 bearings and races that came with (and fit) the frame, pick up a set of used KX or RM 65 fork clamps like THESE, press out the steering stem, and then then machine it (if needed) to fit the BigMinis fork...
  2. Ogm pit bike

    Chinese/Import Minis - General Discussion
    HERE'S a thread from ThumperTalk dated January 3rd, 2008 where the reference was made as to the OGM being very similar to a Pitster
  3. KLX140 carb swap

    Bigger Minis Forum
    Looks like a little YamaBond or ThreeBond 1184 to help hold the vents in place?
  4. Stupid Z50R tire inflation move

    Z50, CT70 and JDM Monkeybikes
    Honda used the 3-bolt rims from '80 through '99, and the part number changes for the rims could have been just a paint color change, something Honda is well-known for doing.
  5. Poor to no acceleration past 5k RPM - specially when going uphill

    Off Topic
    Need some more information from your end... Street bike? Dirt Bike? horizontal engine? vertical engine? 6V points-type ignition? 12V CDI-type ignition? Some pictures of what you have may also help, so we can see what you're working with...
  6. Trx 70 brake help

    1973-1985 ATC70 and TRX70
    Did you try lubing the old cable? Maybe try taking apart the rear brake assembly, cleaning everything, replacing the shoes, and lightly greasing the rear brake cam (part #6, below).
  7. 124cc stroker

    I'm pretty sure that is an aftermarket bigger bore cylinder, the top cooling fins appear to be taller than those on a stock 50 cylinder
  8. V2 head klx YX head

    Import/Chinese Parts for Sale
    Your location and your contact information are both also required in every classified ad, or it will be removed.
  9. lifan/sikk 107cc high comp piston exist?

    Chinese/Import Minis - General Discussion
    2-valve or 3-valve head?
  10. Stupid Z50R tire inflation move

    Z50, CT70 and JDM Monkeybikes
    You're correct, my mistake, but if it's any consolation, I found the 8-hole rims, unfortunately, as 66Cooper said, they are for the 4-bolt style hubs. Here you go..
  11. 110cc oil pump gear shaft shear in two

    Chinese/Import Minis - General Discussion
    My guess would be that the oil pump seized, locking up the pump shaft while the cam chain continued to turn the sprocket. Lack of engine oil, a clogged oil screen and/or oil passageway could have caused it.
  12. My wires dont match!

    Chinese/Import Minis - General Discussion
    You could also pull the flywheel off and see where the wires go on the stator plate.
  13. My wires dont match!

    Chinese/Import Minis - General Discussion
    Contact the people you bought the engine from and see if you can get a wiring harness from them.
  14. Best Hour Meter For CRF 110?

    Honda CRF110
  15. 6v to 12v crank adapter

    Z50, CT70 and JDM Monkeybikes
    You'll need to cut out a portion of the engine case on the left side to make room for the 12V pulse trigger to fit, and check on eBay for the crank end adapter. It also entails a different shift lever because the 12V flywheels are about 3/8-1/2" wider than the stock flywheel.
  16. 88cc big bore , clutch slipping

    Z50, CT70 and JDM Monkeybikes
    When replacing the clutch fibers and springs with new ones, I've found that by turning the clutch adjuster screw clockwise until it stops, and then going counterclockwise until I feel the resistance, helps to reset the clutch lifter plate inside the case.
  17. Reeg mx steering bearings HELP

    Okay, since your Reeg frame had the 32005 bearing races in place, and the KX65 frame in the diagram above also uses the 32005 bearing races, doesn't that tell you that the previous owner may have used KX65 triple clamps and forks when he had the frame?
  18. Reeg mx steering bearings HELP

    You may find the answer right HERE. Look closely at part #92116
  19. Reeg mx steering bearings HELP

    My best guess is that the previous owner had a set of forks with a 24 or 24.5mm steering stem, any way of possibly finding out what the previous owner of the frame used for forks?
  20. Woodstock 1969 z50's 50 years ago today.

    Z50, CT70 and JDM Monkeybikes
    ...And the rider looks like it might be Jorma Kaukonen, from the band
1-20 of 197 Results