Planet Minis

DC50 · 07-17-2008, 01:42 PM

Well i'm to the point right now I want to get rid of the bike. There is NOTHING wrong with it im just sick of only riding ever few weeks. As everyone knows the majority of the bike has been anodized or powdercoated. The motor and most of the parts have under a hour on them.

Only pic I have with the new front wheel on.

Normal marzocchi wheel:

BBR perimeter frame
BBR super comp swing arm
BBR gas tank
BBR skid plate
BBR chain guide
BBR chrome graphics
BBR rear disk brakes
BBR rear hub
BBR front hub
BBR 12" rim
BBR 10" rim
BBR/ gafler rear rotor
Elka shock
BBR D-section exhuats
TBR titanium exhaust (cut down)
TBR pegs
Marzocchi forks (old style)
Hayes brakes with gafler rotor
Universal bars
P3Racing shifter
Red Baron seat
Red Baron plastics
Joker billet throttle
Hard style 35 tooth sprocket
JT 16 tooth drive sprocket
Cold fusion Ignition cover
ASV clutch lever
Lightspeed tank cover
Project 3-2-1 gas cap
Takegawa 124+r ported and polished by DOOD
Takegawa billet oil cooler
shaved flywheel
26mm carb (dont remeber which one.)lol
Kitaco close ratio 3-speed

I would be interested in trades. But right now i'm looking to see what I could get.. yes I know the market BLOWS

357 Racing · 07-17-2008, 02:01 PM

A nickel and dime? JK Its worth $5500. But I would say $3800.

jake16 · 07-17-2008, 02:47 PM

I like it

DC50 · 07-17-2008, 09:24 PM

Quote:

Originally Posted by crf150r

A nickel and dime? JK Its worth $5500. But I would say $3800.

I would like to think its worth more then 3800... hell larry is selling his for 2500 and it only has a 108 in it.

Anyone interested in the roller or motor?

DC50 · 07-17-2008, 09:24 PM

bike and cash for rhino?

slowkid6 · 07-17-2008, 09:25 PM

probally could part it and get more cash because you have some nice parts on there

Farrell639 · 07-17-2008, 09:39 PM

How much money do you think you have in pc'ing and anodozing alone? lol

DC50 · 07-17-2008, 09:53 PM

Quote:

Originally Posted by Farrell639

How much money do you think you have in pc'ing and anodozing alone? lol

between 350-450

knucklehead459 · 07-17-2008, 10:09 PM

how much for motor?

50 Donkey · 07-17-2008, 11:13 PM

Quote:

Originally Posted by DC50

I would like to think its worth more then 3800... hell larry is selling his for 2500 and it only has a 108 in it.

Anyone interested in the roller or motor?

hahah $3500 but it hasn't sold. I'm sure when I part it it will sell just fine. Too many people not spending big these days Blair, but they'll buy bits and pieces. Just sucks parting out nice bikes instead of going to someone to enjoy it whole

DC50 · 07-17-2008, 11:29 PM

**** I ment 3500... I know what you mean larry.

Figure I would try and sell mine so I can buy a rhino.... might need to take a road trip down ur way again

stunt-ur · 07-17-2008, 11:59 PM

Quote:

Originally Posted by DC50

**** I ment 3500... I know what you mean larry.

Figure I would try and sell mine so I can buy a rhino.... might need to take a road trip down ur way again

Oh god...here we go with something else to be babied and unridden...

X7rocks · 07-18-2008, 12:07 AM

i agree those parts are there for a reason
to tear a track up and run like a raped ape tthat bike looks to clean to even look used

DC50 · 07-18-2008, 06:35 AM

I like to keep everything I own clean... this way it holds its value!

I'll post in the for sale section soon, but its not like I dont have money in my acount so there is I dont HAVE to sell it.

50$Pit · 07-18-2008, 10:16 AM

Blair you may as well hold on to it in hopes of the market recovering one day. No sense in losing your ass on it. But what the hell do I know.

DC50 · 07-23-2008, 04:30 PM

well the motor is sold pending payment...

So i'll be selling this stuff next~

Frame setup
Forks (old style. but with hayes brakes, gafler rotor,bbr hub/wheel/spokes)
BBR rear disks
BBR graphics/rb plastics
Universal bars
Joker throttle

supernes550 · 07-23-2008, 04:40 PM

how much you get for the motor?

stunt-ur · 07-23-2008, 05:21 PM

DC, contact Hatterascast, i believe thats his name on his, something very close to that, he is looking for a bbr rear disc setup.

DC50 · 07-23-2008, 05:44 PM

thanks stunt... i'll sell the little stuff once the frame and forks are gone.

07-17-2008, 01:42 PM	#1 (permalink)
DC50 3rd Gear Member Join Date: Jul 2005 Location: Edmonton,AB,Canada Posts: 4,524	My perimeter 50.... Well i'm to the point right now I want to get rid of the bike. There is NOTHING wrong with it im just sick of only riding ever few weeks. As everyone knows the majority of the bike has been anodized or powdercoated. The motor and most of the parts have under a hour on them. Only pic I have with the new front wheel on. Normal marzocchi wheel: BBR perimeter frame BBR super comp swing arm BBR gas tank BBR skid plate BBR chain guide BBR chrome graphics BBR rear disk brakes BBR rear hub BBR front hub BBR 12" rim BBR 10" rim BBR/ gafler rear rotor Elka shock BBR D-section exhuats TBR titanium exhaust (cut down) TBR pegs Marzocchi forks (old style) Hayes brakes with gafler rotor Universal bars P3Racing shifter Red Baron seat Red Baron plastics Joker billet throttle Hard style 35 tooth sprocket JT 16 tooth drive sprocket Cold fusion Ignition cover ASV clutch lever Lightspeed tank cover Project 3-2-1 gas cap Takegawa 124+r ported and polished by DOOD Takegawa billet oil cooler shaved flywheel 26mm carb (dont remeber which one.)lol Kitaco close ratio 3-speed I would be interested in trades. But right now i'm looking to see what I could get.. yes I know the market BLOWS

07-17-2008, 02:01 PM	#2 (permalink)
357 Racing 3rd Gear Member Join Date: Dec 2006 Location: Austin, Texas Posts: 3,575	Re: My perimeter 50.... A nickel and dime? JK Its worth $5500. But I would say $3800.

07-17-2008, 02:47 PM	#3 (permalink)
jake16 2nd Gear Member Join Date: Jul 2008 Location: Dallas TX Posts: 320	Re: My perimeter 50.... I like it

07-17-2008, 09:24 PM	#5 (permalink)
DC50 3rd Gear Member Join Date: Jul 2005 Location: Edmonton,AB,Canada Posts: 4,524	Re: My perimeter 50.... bike and cash for rhino?

07-17-2008, 09:25 PM	#6 (permalink)
slowkid6 3rd Gear Member Join Date: Nov 2006 Location: arkansas Posts: 2,559 Awards Showcase Total Awards: 1	Re: My perimeter 50.... probally could part it and get more cash because you have some nice parts on there

07-17-2008, 09:39 PM	#7 (permalink)
Farrell639 3rd Gear Member Join Date: Sep 2007 Location: Boston, MA Posts: 1,721	Re: My perimeter 50.... How much money do you think you have in pc'ing and anodozing alone? lol

07-17-2008, 10:09 PM	#9 (permalink)
knucklehead459 2nd Gear Member Join Date: Jan 2008 Location: SO*CAL Posts: 535	Re: My perimeter 50.... how much for motor?

07-17-2008, 11:29 PM	#11 (permalink)
DC50 3rd Gear Member Join Date: Jul 2005 Location: Edmonton,AB,Canada Posts: 4,524	Re: My perimeter 50.... **** I ment 3500... I know what you mean larry. Figure I would try and sell mine so I can buy a rhino.... might need to take a road trip down ur way again

07-18-2008, 12:07 AM	#13 (permalink)
X7rocks 2nd Gear Member Join Date: Sep 2006 Location: Maryland Posts: 973	Re: My perimeter 50.... i agree those parts are there for a reason to tear a track up and run like a raped ape tthat bike looks to clean to even look used

07-18-2008, 06:35 AM	#14 (permalink)
DC50 3rd Gear Member Join Date: Jul 2005 Location: Edmonton,AB,Canada Posts: 4,524	Re: My perimeter 50.... I like to keep everything I own clean... this way it holds its value! I'll post in the for sale section soon, but its not like I dont have money in my acount so there is I dont HAVE to sell it. Last edited by DC50; 07-18-2008 at 06:42 AM.

07-18-2008, 10:16 AM	#15 (permalink)
50$Pit 3rd Gear Member Join Date: Sep 2006 Location: Riverside, CA Posts: 2,091 Awards Showcase Total Awards: 1	Re: My perimeter 50.... Blair you may as well hold on to it in hopes of the market recovering one day. No sense in losing your ass on it. But what the hell do I know.

07-23-2008, 04:30 PM	#16 (permalink)
DC50 3rd Gear Member Join Date: Jul 2005 Location: Edmonton,AB,Canada Posts: 4,524	Re: My perimeter 50.... well the motor is sold pending payment... So i'll be selling this stuff next~ Frame setup Forks (old style. but with hayes brakes, gafler rotor,bbr hub/wheel/spokes) BBR rear disks BBR graphics/rb plastics Universal bars Joker throttle

07-23-2008, 04:40 PM	#17 (permalink)
supernes550 The Golden Ticket Join Date: May 2006 Location: 5outh 5an 0iego Posts: 3,121	Re: My perimeter 50.... how much you get for the motor?

07-23-2008, 05:21 PM	#18 (permalink)
stunt-ur 3rd Gear Member Join Date: Feb 2007 Location: Houston, TX Posts: 2,467 Awards Showcase Total Awards: 1	Re: My perimeter 50.... DC, contact Hatterascast, i believe thats his name on his, something very close to that, he is looking for a bbr rear disc setup.

07-23-2008, 05:44 PM	#19 (permalink)
DC50 3rd Gear Member Join Date: Jul 2005 Location: Edmonton,AB,Canada Posts: 4,524	Re: My perimeter 50.... thanks stunt... i'll sell the little stuff once the frame and forks are gone.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)