Planet Minis

siktendenciesracing

Wanting to get an idea on how much of my bike I can sell at one time to figure out if I want to part it or not,,, let me know if anyone is interested in these parts.


1)Front forks:
-Marzocchi KLX110 Shiver forks(Dual Compression and rebound) Revalved By Feal Suspension...Comes with Fork legs, Anodized Green Triple clamps, Wheel, Axle and bolt, fork gaurds, Formula 200mm Rotor and brakes:
$1000.00 shipped OBO Or $1200 with KX65 brakes and adapter kit or $1280.00 with KX65 brakes and the BBR/Galfer Wave rotor

2)Rear Suspension:-Two Brothers Extended Swingarm and Race tech extended Shock Just revalved by Feal Suspension:
$750 shipped OBO

3) Engine:
-Moto HP 165 piston (4 rides on this piston kit)
-Two Brothers 55mm stroker crank (Makes it a 180cc)
-Takagawa +R head and S20 cam (Porting on head done by Mike Castro-Jeremy McGrath and Derek Costellas old mechanic)
-Two Brothers Ti Pipe
-Takagawa 4th Gear Shift drum
-BBR output Shaft
-CHP Shift Star detent
-Two Brothers Hydro Mugura Clutch
-Takagawa Primary Gear
-Two brothers Shifter
-Two Brothers Kick Starter
-Two Brothers Green anodized Big Nuts Kit
-side cases bare metal.
-Takagawa +R manifold with VM26 Carb kit
Uni angled air filter
-Wire Harness w/ Coil, CDI and spark plug wire
-Two Brothers Bump Start
-Renthal 15 tooth sprocket
$2500 Shipped OBO

4)Front Brakes:-KX65 master cylinder
-KX65 Caliper
-Goodridge Steel Braided Brake line in Green
-Sik Tendencies Racing Adapter bracket Anodized Black
-BBR/ Galfer Wave Rotor 200mm (2 rides on it)
$290.00 Shipped OBO

5) Rear Brakes:-KX65 Caliper
-YZ250F Integrated Master Cylinder
-Steel braide Green Brake Line
-Sik Tendencies Racing Adapter Brackets for A-Style Swingarms
-Two Brothers Over the top brake pedal, Green Anodized
$280 Shipped OBO

6)Rear Wheel:
-Black Talon Ultra Light Hub w/ Buchanan Stainless steel spokes and nipples and Black Excel Rim ($640 wheel set new)
-Vortex 39 tooth Hard Anodized Black Sprocket ($60 New)
-Braking Wave Rotor for KX65 hub ($130.00 new)
-Bridgestone 404 tire and Heavy Duty tube
-Wheel lock
$400 shipped

NOTE: The Pro Taper bars, ASV levers, Two Brothers Footpeg Bar, Two Brothers Skid Plate, Two Brothers Tall seat, Plastics and graphics, frame, NCC subframe suport mount, Gas Tank, and other misc parts will be posted for sale if all the parts sell.

Also if someone would want to pick up the complete motor with pipe and another person would want to pick up the complete roller let me know I will sell the complete roller for $2800.00 which would come with all the above "NOTE" above except the Clutch side ASV which both asv's are C5's

Since I don't have a PM box please send me an Email if your interested in something at garymarshall254@hotmail.com or call me (Gary) at 714-392-5929

SchlauchMx

sick bike, you should put this in the classifieds. but I will take the plastics and the chain if things sell

siktendenciesracing

If people seem to be interested in the bigger ticket items I will be putting it over there, but for right now I am really just feeling it all out.

moto696

are you willing to part out the motor?? cause if so ill buy some stuff off you

siktendenciesracing

Only parting out the motor complete, sorry.

50$Pit

I got $5 on the front end, $5 on the motor, and $5 on the rear end. You can keep the graphics though.

siktendenciesracing

You actually have $15???? that is a shocker since you are always crying about Entry Fees!!!!! Little Biiiiiiiiiiiii--h!!!! LOL,,,,,,,, and by the way,,,,, I couldn't give you the graphics kit anyway cause your Slow!! LOL

alexficco

i may be intrested in front forks, front brakes, seat

siktendenciesracing

Let me know fast because I just put it up for sale as a roller and another classified for the motor complete. So let me know what you want and are willing to pay with shipping for the Seat and forks with the KX65 brakes and BBR/ Galfer wave rotor. Send Email to garymarshall254@hotmail.com or call me direct at 714-392-5929

50$Pit

I got a loan for the $15. Not all of us can be retired mini bike parts seller tycoons.

In regards to my speed, if you think I'm slow you need to see yourself in a video, looking like those pictures got to your head.

siktendenciesracing

Well I can have the graphic kit because I am the owner of the company,,, so I don't have to be fast!! LOL But you on the other hand need to start eating your wheaties!!! LOL

bonez1093

how much for the complete front and rear swingarm with shock

siktendenciesracing

I am selling the complete roller for $3000

SchlauchMx

how much for a set of those killer graphics !

siktendenciesracing

They are $55 shipped with your name and number on them. They come in Blue, Green, Yellow, Pink, Red for White plastics and the same colors for Black plastics. You can get them Direct from MX stix (Jeff from UTAH) same guy that does MotoHP's graphics for his Vegas Bikes.

50 Donkey

Gary, did you get my email question about my motor? you can't get PM's on here

siktendenciesracing

Yeah, I just got back from San Diego today and haven't emailed you back. It sounds like you just need new clutches because when the kicker is going down the clutches are slipping which will not allow you to turn over the crank. Bring it by and we can hook it up!

yotaman450

whats the best you can do on the rear end with the shock? i know you want 750 but give me a good deal and ill paypal you asap

SchlauchMx

I did a search for MX stix and couldn't find him, Does he have a phone #?

siktendenciesracing

Yeah here is his Phone Number: 801-686-1879 Tell him that Gary Marshall gave you his number