Planet Minis

KeepItCrunk · 08-07-2008, 08:44 PM

A year ago or so my friends all got in on a group buy and got some UPC 50's for a good price. Most of them we thrashed, but they all held up pretty good. There all still around for the most part, but I'm tired of looking at all my friends and my parts laying in my garage at work. So heres what I'm getting rid of at the moment.

They were the aluminum framed models. One was dumped after a few days and the flywheel cover cracked and it was retired to be the parts whore basically.

I'm not sure of the measurments or anything, but it had a 10'' with disc in the rear, and it looked like there was room for a 12'' no problem. The frame is in beautiful shape, it was only rode about 11 hours, no chips, dents, scrapes, you can tell it wasn't really used. The rear shock from day one seemed kinda cheap, its just very springy. I'm including Frame, Swingarm, Shock, Rear Axle and Rear brake assembly, and asking 300 b/o for it all.

This particular motor was crashed and the flywheel cover chipped and broke off. The motor has about 11 hours on it as well, as it came out of the previously mentioned frame. Its visually mint, other then missing the cover. Its a 4 speed with clutch, 124cc. I'm not sure of the make, It doesn't say GPX on it but it is basically identical to my GPX 124. Motor ran when i started it before it was removed from the frame this spring. Looking for 150 b/o.

One of the bikes came with Blue Anodized rims and my friend hated the way they looked on his bike, so he took them off in favor of black wheels. The rims are blue, black hubs and chrome spokes and nipples. Will come with rotors but the sprocket was used on another bike. No tires or tubes either as they were used on other bikes. 80 b/o for the set.

Light duty skid plate, from some knockoff jap bike. Bike self destructed, skid plate in virtually fine, small scrapes here and there. Made of what looks like 3/16ths aluminum, and bolts onto my pitster X2, my CRF50 and UPC50's, so I'd assume and jap CRF50 knockff as well. 10 bucks.

Wireing harness for UPC 50. Looks the same as my X2 and was used on a CRF50 for a while, so I'd assume again that it would work on all the other like it. 35 b/o.

All prices are not including shipping, you responsible for calculating the ammount. My zip is 01473 and i live in Central mass. I will deliver within 100ish mile for some extra cash. My name is Justin and my cell number is 978-855-3141, call and time if you have any questions. Pics are available if you want some.

thanks for looking!!

RedRider84 · 08-07-2008, 08:54 PM

can you hook me up with some pics of that 124 motor? Very interested.

KeepItCrunk · 08-07-2008, 09:05 PM

Eh, screw it, I'll post full pics around 4pm tomorrow. That was a duh on my behalf for not putting them up first anyway.

50-50 · 08-07-2008, 09:10 PM

Photos and prices?!

RedRider84 · 08-07-2008, 09:16 PM

he just said hes getting pics up tomorrow..

KeepItCrunk · 08-08-2008, 05:02 PM

In a funny turn of events my friend ended up picking the wheelset and frame up. He somehow also convinced me to sell him the fork which i was going to use, hmm, i need more willpower. lol. I still have the motor and wiring harness tho, and pics will be up in about 15 mins.

KeepItCrunk · 08-08-2008, 05:43 PM

there they are!!

RedRider84 · 08-08-2008, 06:49 PM

PMed you about the engine!

The Nutty Professor · 08-09-2008, 02:25 PM

Where are the frame pictures?

chasetheface123 · 08-09-2008, 04:07 PM

he sold it

08-07-2008, 08:44 PM	#1 (permalink)
KeepItCrunk PM Newbie Join Date: May 2008 Location: WestMini-ster Mass Posts: 9	UPC Alum Frame, 12/10 Wheels, 124 Motor A year ago or so my friends all got in on a group buy and got some UPC 50's for a good price. Most of them we thrashed, but they all held up pretty good. There all still around for the most part, but I'm tired of looking at all my friends and my parts laying in my garage at work. So heres what I'm getting rid of at the moment. They were the aluminum framed models. One was dumped after a few days and the flywheel cover cracked and it was retired to be the parts whore basically. I'm not sure of the measurments or anything, but it had a 10'' with disc in the rear, and it looked like there was room for a 12'' no problem. The frame is in beautiful shape, it was only rode about 11 hours, no chips, dents, scrapes, you can tell it wasn't really used. The rear shock from day one seemed kinda cheap, its just very springy. I'm including Frame, Swingarm, Shock, Rear Axle and Rear brake assembly, and asking 300 b/o for it all. This particular motor was crashed and the flywheel cover chipped and broke off. The motor has about 11 hours on it as well, as it came out of the previously mentioned frame. Its visually mint, other then missing the cover. Its a 4 speed with clutch, 124cc. I'm not sure of the make, It doesn't say GPX on it but it is basically identical to my GPX 124. Motor ran when i started it before it was removed from the frame this spring. Looking for 150 b/o. One of the bikes came with Blue Anodized rims and my friend hated the way they looked on his bike, so he took them off in favor of black wheels. The rims are blue, black hubs and chrome spokes and nipples. Will come with rotors but the sprocket was used on another bike. No tires or tubes either as they were used on other bikes. 80 b/o for the set. Light duty skid plate, from some knockoff jap bike. Bike self destructed, skid plate in virtually fine, small scrapes here and there. Made of what looks like 3/16ths aluminum, and bolts onto my pitster X2, my CRF50 and UPC50's, so I'd assume and jap CRF50 knockff as well. 10 bucks. Wireing harness for UPC 50. Looks the same as my X2 and was used on a CRF50 for a while, so I'd assume again that it would work on all the other like it. 35 b/o. All prices are not including shipping, you responsible for calculating the ammount. My zip is 01473 and i live in Central mass. I will deliver within 100ish mile for some extra cash. My name is Justin and my cell number is 978-855-3141, call and time if you have any questions. Pics are available if you want some. thanks for looking!! Last edited by KeepItCrunk; 08-07-2008 at 08:54 PM. Reason: type-o

08-07-2008, 08:54 PM	#2 (permalink)
RedRider84 2nd Gear Member Join Date: Apr 2006 Location: Califon, NJ Posts: 489	Re: UPC Alum Frame, 12/10 Wheels, 124 Motor can you hook me up with some pics of that 124 motor? Very interested.

08-07-2008, 09:05 PM	#3 (permalink)
KeepItCrunk PM Newbie Join Date: May 2008 Location: WestMini-ster Mass Posts: 9	Re: UPC Alum Frame, 12/10 Wheels, 124 Motor Eh, screw it, I'll post full pics around 4pm tomorrow. That was a duh on my behalf for not putting them up first anyway.

08-07-2008, 09:10 PM	#4 (permalink)
50-50 3rd Gear Member Join Date: Aug 2006 Location: PA Posts: 1,346	Re: UPC Alum Frame, 12/10 Wheels, 124 Motor Photos and prices?!

08-07-2008, 09:16 PM	#5 (permalink)
RedRider84 2nd Gear Member Join Date: Apr 2006 Location: Califon, NJ Posts: 489	Re: UPC Alum Frame, 12/10 Wheels, 124 Motor he just said hes getting pics up tomorrow..

08-08-2008, 05:02 PM	#6 (permalink)
KeepItCrunk PM Newbie Join Date: May 2008 Location: WestMini-ster Mass Posts: 9	Re: UPC Alum Frame, 12/10 Wheels, 124 Motor In a funny turn of events my friend ended up picking the wheelset and frame up. He somehow also convinced me to sell him the fork which i was going to use, hmm, i need more willpower. lol. I still have the motor and wiring harness tho, and pics will be up in about 15 mins.

08-08-2008, 05:43 PM	#7 (permalink)
KeepItCrunk PM Newbie Join Date: May 2008 Location: WestMini-ster Mass Posts: 9	Re: UPC Alum Frame, 12/10 Wheels, 124 Motor there they are!!

08-08-2008, 06:49 PM	#8 (permalink)
RedRider84 2nd Gear Member Join Date: Apr 2006 Location: Califon, NJ Posts: 489	Re: UPC Alum Frame, 12/10 Wheels, 124 Motor PMed you about the engine!

08-09-2008, 02:25 PM	#9 (permalink)
The Nutty Professor 1st Gear Member Join Date: Oct 2007 Location: Savannah, Georgia (Rincon) Posts: 209	Re: UPC Alum Frame, 12/10 Wheels, 124 Motor Where are the frame pictures?

08-09-2008, 04:07 PM	#10 (permalink)
chasetheface123 Chuck Norris for president! Join Date: Nov 2007 Location: Boyne City Michigan Posts: 2,283	Re: UPC Alum Frame, 12/10 Wheels, 124 Motor he sold it

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)