Planet Minis

Racinguy542 · 12-07-2007, 09:16 PM

Most of these parts came from a Terminator Scooter pitbike....everything works fine, I just wanted a change of colors....

12" rear wheel. Fits 12mm axel. NOT the stock size brake drum for a CRF50. I have the drum that goes with it (not pictured), but its missing a couple pieces of hardware. Tread on the tire is maybe 50-60%.

14" front wheel with brake disk. Great shape. Fits 12mm axel. All you need are the bolts to connect the disk to the wheel.
SOLD

Extended Mono swinger. Originally silver, but painted black. Comes with swinger bolt and the built in chain sliders. Requires a longer axel.

Blue and white CRF50 style plastics and tank. The chrome on the gas cap is peeling badly, but the cap is obviously still funtional. Plastics are in pretty good SOLD

Low profile chrome handlebars with umm...1 grip

Very good shape.

CRF50 style pipe for big bore motors. It feels like it leaves you with a little less torque on the low end, but its very quiet (for those of you with complaining neighbors...).

Stock Kawasaki 110 shock for the A-style frame. It was mounted and then taken back off because I got the mono setup.
SOLD

Stock XR50 swinger. Little beat up, but would clean up nice with paint.

Make offers. Nothing reasonable is refused, as these parts would do better on your bike rather than my garage floor.

Post, PM, or email Racinguy5420@comcast.net

Racinguy542 · 12-21-2007, 11:49 AM

This stuff is only worth what someone will pay for it. What's it worth to you?
I'll throw out what I think is fair so you know what I'm looking for.

12" rear wheel with drum (minus some missing hardware) - $30+shipping
New swingarm and swinger bolt - $20+shipping
Handlebars - $10+shipping
Big Bore crf50 style pipe - $30+shipping
Stock XR50 swinger - $10+shipping

I don't think any of these are unfair prices, but I haven't researched alot so I could be wrong.

All items are located in Denver, Colorado to give you an idea of what shipping could cost, or if you are local and just want to pick something up. Thanks.

Kris
(Racinguy5420@comcast.net)

gohard123 · 12-27-2007, 01:48 PM

I will take the 14'' front tire if you still have it and shipping will be reasonable. if you can get me a price to minneapolis mn 55432, then we can figure something out

ryan

Racinguy542 · 12-27-2007, 07:51 PM

PM sent on the wheel/tire.

Racinguy542 · 01-01-2008, 07:26 PM

Shock is gone.

EVERYTHING else is available.

Offers? Trades? Open to anything...

Racinguy542 · 01-02-2008, 01:45 PM

Front wheel GONE

Plastics GONE

Thanks guys!

12-07-2007, 09:16 PM	#1 (permalink)
Racinguy542 2nd Gear Member Join Date: Jun 2007 Location: Denver, CO Posts: 456	FS Random...plastics, wheels/tires, shock, etc. Most of these parts came from a Terminator Scooter pitbike....everything works fine, I just wanted a change of colors.... 12" rear wheel. Fits 12mm axel. NOT the stock size brake drum for a CRF50. I have the drum that goes with it (not pictured), but its missing a couple pieces of hardware. Tread on the tire is maybe 50-60%. 14" front wheel with brake disk. Great shape. Fits 12mm axel. All you need are the bolts to connect the disk to the wheel. SOLD Extended Mono swinger. Originally silver, but painted black. Comes with swinger bolt and the built in chain sliders. Requires a longer axel. Blue and white CRF50 style plastics and tank. The chrome on the gas cap is peeling badly, but the cap is obviously still funtional. Plastics are in pretty good SOLD Low profile chrome handlebars with umm...1 grip Very good shape. CRF50 style pipe for big bore motors. It feels like it leaves you with a little less torque on the low end, but its very quiet (for those of you with complaining neighbors...). Stock Kawasaki 110 shock for the A-style frame. It was mounted and then taken back off because I got the mono setup. SOLD Stock XR50 swinger. Little beat up, but would clean up nice with paint. Make offers. Nothing reasonable is refused, as these parts would do better on your bike rather than my garage floor. Post, PM, or email Racinguy5420@comcast.net Last edited by Racinguy542; 01-02-2008 at 01:47 PM.

12-21-2007, 11:49 AM	#2 (permalink)
Racinguy542 2nd Gear Member Join Date: Jun 2007 Location: Denver, CO Posts: 456	Re: FS Random...plastics, wheels/tires, shock, etc. This stuff is only worth what someone will pay for it. What's it worth to you? I'll throw out what I think is fair so you know what I'm looking for. 12" rear wheel with drum (minus some missing hardware) - $30+shipping New swingarm and swinger bolt - $20+shipping Handlebars - $10+shipping Big Bore crf50 style pipe - $30+shipping Stock XR50 swinger - $10+shipping I don't think any of these are unfair prices, but I haven't researched alot so I could be wrong. All items are located in Denver, Colorado to give you an idea of what shipping could cost, or if you are local and just want to pick something up. Thanks. Kris (Racinguy5420@comcast.net) Last edited by Racinguy542; 01-02-2008 at 01:48 PM.

12-27-2007, 01:48 PM	#3 (permalink)
gohard123 PM Newbie Join Date: Nov 2007 Location: minnesota Posts: 33	Re: FS Random...plastics, wheels/tires, shock, etc. I will take the 14'' front tire if you still have it and shipping will be reasonable. if you can get me a price to minneapolis mn 55432, then we can figure something out ryan

12-27-2007, 07:51 PM	#4 (permalink)
Racinguy542 2nd Gear Member Join Date: Jun 2007 Location: Denver, CO Posts: 456	Re: FS Random...plastics, wheels/tires, shock, etc. PM sent on the wheel/tire.

01-01-2008, 07:26 PM	#5 (permalink)
Racinguy542 2nd Gear Member Join Date: Jun 2007 Location: Denver, CO Posts: 456	Re: FS Random...plastics, wheels/tires, shock, etc. Shock is gone. EVERYTHING else is available. Offers? Trades? Open to anything...

01-02-2008, 01:45 PM	#6 (permalink)
Racinguy542 2nd Gear Member Join Date: Jun 2007 Location: Denver, CO Posts: 456	Re: FS Random...plastics, wheels/tires, shock, etc. Front wheel GONE Plastics GONE Thanks guys!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)