Planet Minis

Z'mnypit · 01-01-2008, 01:12 PM

-Ive got A set of SGR forks removed from an X4, pitster Clamps, risers, tapperd bearings, all bolts and the 1 1/8th pastrana cut bars. I was going to use this setup on my perimeter frame but decided not to. You will need the steering stem as I was using a current one I had. The risers were a little scratched so they have been painted black and the forks have a couple scratches on them but nothing major. They are 30" in length, use a 15mm stepped axle from pitster. Both are fully adjustable, one being rebound, one being compression. Looking for 220 shipped.
SOLD!!!!!!!!!!!!!!!

- 1 chrome plated/billet gas caps. $5 shipped

- Piranha billet 1/4 turn throttle. The inside has been sanded bit so it would turn smoothly. $15 shipped

- White 500lb (I believe) spring. Brand new never used. $10 shipped

- Molkt 26mm carb with intake ported to match. Used on a GPX150 for no more then 30 min. Traded the motor so no need for the carb. $50 shipped for carb, intake and plastic spacers. SOLD!

- Pitster/GPX150 oil cooler and lines. Used no more than 30min. Only thing missing is the bolts where it bolted to the motor and those went with the motor. $20 shipped.

I think thats all for right now, but as I finish cleaning out the garage Ill add to the list. All pics will be added in a bit. (waiting on battery to charge) I accept paypal or MO. PM me with any questions.

Thanks!

theyouthahead · 01-01-2008, 11:19 PM

u have pics of the throttle ? im interested

Z'mnypit · 01-02-2008, 06:45 PM

Yeah, Im trying to get them uploaded to photobucket.

ChainReactionR1 · 01-03-2008, 07:03 AM

pm sent

Z'mnypit · 01-03-2008, 12:04 PM

Thats white lithium grease inside the throttle, and black spraypaint on the outside from installing the grips.

Z'mnypit · 01-04-2008, 04:35 PM

Prices lowered, Need this out of the basement quick

OGBIKES · 01-04-2008, 06:39 PM

pm sent

01-01-2008, 01:12 PM	#1 (permalink)
Z'mnypit 1st Gear Member Join Date: Nov 2007 Location: Birmingham, AL Posts: 226	Forks, bars, gas caps, throttle and more -Ive got A set of SGR forks removed from an X4, pitster Clamps, risers, tapperd bearings, all bolts and the 1 1/8th pastrana cut bars. I was going to use this setup on my perimeter frame but decided not to. You will need the steering stem as I was using a current one I had. The risers were a little scratched so they have been painted black and the forks have a couple scratches on them but nothing major. They are 30" in length, use a 15mm stepped axle from pitster. Both are fully adjustable, one being rebound, one being compression. Looking for 220 shipped. SOLD!!!!!!!!!!!!!!! - 1 chrome plated/billet gas caps. $5 shipped - Piranha billet 1/4 turn throttle. The inside has been sanded bit so it would turn smoothly. $15 shipped - White 500lb (I believe) spring. Brand new never used. $10 shipped - Molkt 26mm carb with intake ported to match. Used on a GPX150 for no more then 30 min. Traded the motor so no need for the carb. $50 shipped for carb, intake and plastic spacers. SOLD! - Pitster/GPX150 oil cooler and lines. Used no more than 30min. Only thing missing is the bolts where it bolted to the motor and those went with the motor. $20 shipped. I think thats all for right now, but as I finish cleaning out the garage Ill add to the list. All pics will be added in a bit. (waiting on battery to charge) I accept paypal or MO. PM me with any questions. Thanks! Last edited by Z'mnypit; 01-09-2008 at 07:44 AM.

01-01-2008, 11:19 PM	#2 (permalink)
theyouthahead PM Newbie Join Date: Jan 2007 Posts: 69	Re: Forks, bars, gas caps, throttle and more u have pics of the throttle ? im interested

01-02-2008, 06:45 PM	#3 (permalink)
Z'mnypit 1st Gear Member Join Date: Nov 2007 Location: Birmingham, AL Posts: 226	Re: Forks, bars, gas caps, throttle and more Yeah, Im trying to get them uploaded to photobucket.

01-03-2008, 07:03 AM	#4 (permalink)
ChainReactionR1 2nd Gear Member Join Date: Jan 2007 Location: Atlanta, Georgia Posts: 693	Re: Forks, bars, gas caps, throttle and more pm sent

01-03-2008, 12:04 PM	#5 (permalink)
Z'mnypit 1st Gear Member Join Date: Nov 2007 Location: Birmingham, AL Posts: 226	Re: Forks, bars, gas caps, throttle and more Thats white lithium grease inside the throttle, and black spraypaint on the outside from installing the grips.

01-04-2008, 04:35 PM	#6 (permalink)
Z'mnypit 1st Gear Member Join Date: Nov 2007 Location: Birmingham, AL Posts: 226	Re: Forks, bars, gas caps, throttle and more Prices lowered, Need this out of the basement quick

01-04-2008, 06:39 PM	#7 (permalink)
OGBIKES PM Newbie Join Date: Jan 2008 Location: California Posts: 50	Re: Forks, bars, gas caps, throttle and more pm sent

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)