Planet Minis

dougtrip · 10-07-2008, 09:17 PM

I have a rear x4r wheel with a cyclone aluminum rim/swingarm and brakes-NO SHOCK-$200 plus shipping

zochs with tripleclamps brakes and front wheel w/cylone rim-$400 plus shipping

the rear tire is pretty much worn and the tube is flat, i will include a new tube, the fronts not bad.

150cc engine/inner rotor-no carb or intake. top end will be barnd new! "The right side case has been modified to not run a cooler"
$300 plus shipping

if my +r head doesn't sell i'll add it for a total of $600

stock frame with mso-$75 plus shipping-donated

dougtrip · 10-07-2008, 09:20 PM

more pics in the klx section

x4r suspension/swingarm zochs/klxster build

dougtrip · 10-07-2008, 09:26 PM

moderator please move, i posted here by mistake

357 Racing · 10-07-2008, 09:26 PM

Quote:

Originally Posted by dougtrip

"The right side case has been modified to not run a cooler"

I dont under stand. If I buy just the motor without the head is it ready run? Does it come with the kicker, the wiring and stuff? How many ours do you have on it? Why are you selling it?

dougtrip · 10-07-2008, 09:31 PM

everything but the head. yes a kicker, wiring, shifter, and a stock yx head with cam if needed for 50 extra. it doesn't have much time. i built it in 07 but don't ride much at all-1 or 2 times a month and even less during th e winter. selling because i'm building something else.

if you remove the clutch side cover there's a small wall that keeps the oil from flowing into the other passage that goes to the head. i don't really run oil coolers because i don't really think that they work all that well and i have seen to many times when a line gets torn from bumping during a race. I drilled a hole in the wall and plugged the in and out ports. you could have the hole welded and then use a cooler-to each his own

357 Racing · 10-07-2008, 10:38 PM

What clutch is in there? Kevlar?

I already have a stock x head, cam, intake, and carb that my bro will never use. I hope it will stay up intill I have the whole amount. Then here comes fire breathing dragon Z50.

357 Racing · 10-08-2008, 04:15 PM

^^^^^

dougtrip · 10-08-2008, 04:58 PM

trx90 plates-works well

dougtrip · 10-09-2008, 08:07 AM

cyl and piston sold! engine will be assembled as a stocker-150cc, however the cases are bored in the event that you would like to go big!

dougtrip · 10-09-2008, 08:10 AM

gpx 150cc engine for $300 plus shipping. cyl and piston sold. the engine will have a new zero hr top end.

dougtrip · 10-11-2008, 06:59 AM

frame donated to wide open racing

RLucky82 · 10-11-2008, 10:12 AM

How much for engine minus cyl+head? and I need a complete rear brake system since I donated some parts to sam and blew another mastercyl. on the x4m...

RLucky82 · 10-27-2008, 04:41 PM

got the 178 +R loaded and running in the x4R - WOW what a monster, this setup needs 17 front maybe even 37-35 rear? and thats with the a stock (jetted) china 26mm carb from a 150...

Thanks Doug!

dougtrip · 10-28-2008, 08:09 AM

nice, glad you like it.

10-07-2008, 09:26 PM	#3 (permalink)
dougtrip 3rd Gear Member Join Date: Dec 2005 Location: North East Ohio Posts: 1,807	Re: 178cc/zochs/rims/frame moderator please move, i posted here by mistake

10-07-2008, 09:31 PM	#5 (permalink)
dougtrip 3rd Gear Member Join Date: Dec 2005 Location: North East Ohio Posts: 1,807	Re: 178cc/zochs/rims/frame everything but the head. yes a kicker, wiring, shifter, and a stock yx head with cam if needed for 50 extra. it doesn't have much time. i built it in 07 but don't ride much at all-1 or 2 times a month and even less during th e winter. selling because i'm building something else. if you remove the clutch side cover there's a small wall that keeps the oil from flowing into the other passage that goes to the head. i don't really run oil coolers because i don't really think that they work all that well and i have seen to many times when a line gets torn from bumping during a race. I drilled a hole in the wall and plugged the in and out ports. you could have the hole welded and then use a cooler-to each his own Last edited by dougtrip; 10-07-2008 at 09:36 PM.

10-07-2008, 10:38 PM	#6 (permalink)
357 Racing 3rd Gear Member Join Date: Dec 2006 Location: Austin, Texas Posts: 3,573	Re: 178cc/zochs/rims/frame What clutch is in there? Kevlar? I already have a stock x head, cam, intake, and carb that my bro will never use. I hope it will stay up intill I have the whole amount. Then here comes fire breathing dragon Z50.

10-08-2008, 04:15 PM	#7 (permalink)
357 Racing 3rd Gear Member Join Date: Dec 2006 Location: Austin, Texas Posts: 3,573	Re: 178cc/zochs/rims/frame ^^^^^

10-08-2008, 04:58 PM	#8 (permalink)
dougtrip 3rd Gear Member Join Date: Dec 2005 Location: North East Ohio Posts: 1,807	Re: 178cc/zochs/rims/frame trx90 plates-works well

10-09-2008, 08:07 AM	#9 (permalink)
dougtrip 3rd Gear Member Join Date: Dec 2005 Location: North East Ohio Posts: 1,807	Re: 178cc/zochs/rims/frame cyl and piston sold! engine will be assembled as a stocker-150cc, however the cases are bored in the event that you would like to go big!

10-09-2008, 08:10 AM	#10 (permalink)
dougtrip 3rd Gear Member Join Date: Dec 2005 Location: North East Ohio Posts: 1,807	Re: 178cc/zochs/rims/frame gpx 150cc engine for $300 plus shipping. cyl and piston sold. the engine will have a new zero hr top end.

10-11-2008, 06:59 AM	#11 (permalink)
dougtrip 3rd Gear Member Join Date: Dec 2005 Location: North East Ohio Posts: 1,807	Re: 178cc/zochs/rims/frame frame donated to wide open racing

10-11-2008, 10:12 AM	#12 (permalink)
RLucky82 3rd Gear Member Join Date: Jan 2007 Location: Medina Ohio Posts: 1,865	Re: 178cc/zochs/rims/frame How much for engine minus cyl+head? and I need a complete rear brake system since I donated some parts to sam and blew another mastercyl. on the x4m...

10-27-2008, 04:41 PM	#13 (permalink)
RLucky82 3rd Gear Member Join Date: Jan 2007 Location: Medina Ohio Posts: 1,865	Re: 178cc/zochs/rims/frame got the 178 +R loaded and running in the x4R - WOW what a monster, this setup needs 17 front maybe even 37-35 rear? and thats with the a stock (jetted) china 26mm carb from a 150... Thanks Doug!

10-28-2008, 08:09 AM	#14 (permalink)
dougtrip 3rd Gear Member Join Date: Dec 2005 Location: North East Ohio Posts: 1,807	Re: 178cc/zochs/rims/frame nice, glad you like it.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)