Planet Minis

j440 · 09-06-2008, 07:56 AM

have entire bike. taking paypal. prices are negotiable for sure.

front wheel - great condition, good tire no problems - 75$ SOLD

rear wheel - same as front, no problems at all good tread - 75$ (comes with brakes) SOLD

swingarm - good condition, good bearings, no cracks or anything - 50$ SOLD

fork legs - 75$

triple clamp - 50$ (with bearings)

frame no cracks or problems - 50$

complete plastic set, not in best condition gas tank included - 25$

rear shock - 50$ SOLD

airbox/filter - 15$

engine stock, N/A topend hours, starts first kick. has hinson clutch basket (needs to be replaced) EBC hd clutch plates/springs includes harness/cooling/carb/cables - 200$

exhaust - 15$

anything else i missed ask for it pics ASAP

j440 · 09-07-2008, 02:56 PM

moto395 · 09-07-2008, 04:50 PM

Quote:

Originally Posted by j440

ttt

pic of forks to motocross51@yahoo.com

flon3y · 09-07-2008, 10:10 PM

do both wheels come with brakes or just the rear?
caliper, rotor, lines, and cyl?

FastMC · 09-07-2008, 10:55 PM

j440...Please post up some contact info...click: Classified posting New/Old rules !!!!!!!!!!!!!!!

j440 · 09-09-2008, 12:29 PM

i figured whoever could just PM me

my email is enemaofthemonth@gmail.com though

and the rear wheel is drum brake, front wheel has rotor, no brakes though

j440 · 09-09-2008, 06:33 PM

heres the front wheel

moto395 · 09-09-2008, 06:34 PM

will the 65 fork legs mount right up to stock 110 triples?

j440 · 09-09-2008, 06:46 PM

i forgot to say this is a friends im parting for.

but, i have a 99 65sx front end (same exact thing) for my 110. the legs are just a hair to big for the 110 clamps, but im sure with the right stone, or whatever a dremel and you ream out the 110 clamps that 1/8 or whatever it is of an inch, theyll work.

the way i did it on mine, i pressed the 65 stem out, bored out the 65 clamps and put the 110 stem in it.

moto395 · 09-09-2008, 06:51 PM

Quote:

Originally Posted by j440

i forgot to say this is a friends im parting for.

but, i have a 99 65sx front end (same exact thing) for my 110. the legs are just a hair to big for the 110 clamps, but im sure with the right stone, or whatever a dremel and you ream out the 110 clamps that 1/8 or whatever it is of an inch, theyll work.

the way i did it on mine, i pressed the 65 stem out, bored out the 65 clamps and put the 110 stem in it.

how hard was that?

j440 · 09-09-2008, 07:31 PM

not hard at all, popped the stem out with a half ton press, got a little tool to ream out the upper clamp alittle to fit on the upper part of the stem, ground down the weld on the stock 110 bottom clamp, popped it out of that clamp, got a 1-3/32" drill bit and bored the 65 bottom clamp, pressed it in and welded the bottom. was worth it for the price

j440 · 09-12-2008, 08:51 AM

j440 · 09-16-2008, 07:20 AM

to the top, these parts are going for cheap, perfect if you want to do the 65sx swingarm conversion

j440 · 09-21-2008, 06:56 AM

swingarm/shock are gone

everything else is still here though

j440 · 09-25-2008, 06:12 PM

CRAGARS · 09-26-2008, 03:43 PM

I'm interusted in forks/tripple clamps & any other small parts to convert to a klx110.Don't need wheel or brakes but do need axle & misc. hardware,how much??thanx craig

j440 · 09-26-2008, 04:28 PM

125 for the forks/triples/risers

145 if you want the front fender/number plate

CRAGARS · 09-26-2008, 04:34 PM

Dont want the plastic,does 125. include axle &nut?Also does lower fork tube have disc mount boss??

j440 · 09-26-2008, 05:27 PM

yessir it does, and the lower left fork leg has a mount for the caliper yes

j440 · 09-28-2008, 07:52 AM

bumppppppp

swinger/rear shock/front wheel/rear wheel are gone

everything else still available.

09-06-2008, 07:56 AM	#1 (permalink)
j440 2nd Gear Member Join Date: Oct 2007 Location: CT Posts: 368	99 ktm65sx part out have entire bike. taking paypal. prices are negotiable for sure. front wheel - great condition, good tire no problems - 75$ SOLD rear wheel - same as front, no problems at all good tread - 75$ (comes with brakes) SOLD swingarm - good condition, good bearings, no cracks or anything - 50$ SOLD fork legs - 75$ triple clamp - 50$ (with bearings) frame no cracks or problems - 50$ complete plastic set, not in best condition gas tank included - 25$ rear shock - 50$ SOLD airbox/filter - 15$ engine stock, N/A topend hours, starts first kick. has hinson clutch basket (needs to be replaced) EBC hd clutch plates/springs includes harness/cooling/carb/cables - 200$ exhaust - 15$ anything else i missed ask for it pics ASAP Last edited by j440; 09-28-2008 at 07:52 AM.

09-07-2008, 02:56 PM	#2 (permalink)
j440 2nd Gear Member Join Date: Oct 2007 Location: CT Posts: 368	Re: 99 ktm65sx part out ttt

09-07-2008, 10:10 PM	#4 (permalink)
flon3y PM Newbie Join Date: May 2007 Location: Bellingham Posts: 99	Re: 99 ktm65sx part out do both wheels come with brakes or just the rear? caliper, rotor, lines, and cyl?

09-07-2008, 10:55 PM	#5 (permalink)
FastMC Sporting the Merkin Join Date: Mar 2004 Location: boston area Posts: 4,374 Awards Showcase Total Awards: 1	Re: 99 ktm65sx part out j440...Please post up some contact info...click: Classified posting New/Old rules !!!!!!!!!!!!!!! __________________ The older I get...The faster I was !!!

09-09-2008, 12:29 PM	#6 (permalink)
j440 2nd Gear Member Join Date: Oct 2007 Location: CT Posts: 368	Re: 99 ktm65sx part out i figured whoever could just PM me my email is enemaofthemonth@gmail.com though and the rear wheel is drum brake, front wheel has rotor, no brakes though

09-09-2008, 06:34 PM	#8 (permalink)
moto395 2nd Gear Member Join Date: Jun 2008 Location: Nor*Cal Posts: 846	Re: 99 ktm65sx part out will the 65 fork legs mount right up to stock 110 triples?

09-09-2008, 06:46 PM	#9 (permalink)
j440 2nd Gear Member Join Date: Oct 2007 Location: CT Posts: 368	Re: 99 ktm65sx part out i forgot to say this is a friends im parting for. but, i have a 99 65sx front end (same exact thing) for my 110. the legs are just a hair to big for the 110 clamps, but im sure with the right stone, or whatever a dremel and you ream out the 110 clamps that 1/8 or whatever it is of an inch, theyll work. the way i did it on mine, i pressed the 65 stem out, bored out the 65 clamps and put the 110 stem in it.

09-09-2008, 07:31 PM	#11 (permalink)
j440 2nd Gear Member Join Date: Oct 2007 Location: CT Posts: 368	Re: 99 ktm65sx part out not hard at all, popped the stem out with a half ton press, got a little tool to ream out the upper clamp alittle to fit on the upper part of the stem, ground down the weld on the stock 110 bottom clamp, popped it out of that clamp, got a 1-3/32" drill bit and bored the 65 bottom clamp, pressed it in and welded the bottom. was worth it for the price

09-12-2008, 08:51 AM	#12 (permalink)
j440 2nd Gear Member Join Date: Oct 2007 Location: CT Posts: 368	Re: 99 ktm65sx part out bump

09-16-2008, 07:20 AM	#13 (permalink)
j440 2nd Gear Member Join Date: Oct 2007 Location: CT Posts: 368	Re: 99 ktm65sx part out to the top, these parts are going for cheap, perfect if you want to do the 65sx swingarm conversion

09-21-2008, 06:56 AM	#14 (permalink)
j440 2nd Gear Member Join Date: Oct 2007 Location: CT Posts: 368	Re: 99 ktm65sx part out swingarm/shock are gone everything else is still here though

09-25-2008, 06:12 PM	#15 (permalink)
j440 2nd Gear Member Join Date: Oct 2007 Location: CT Posts: 368	Re: 99 ktm65sx part out bump

09-26-2008, 03:43 PM	#16 (permalink)
CRAGARS PM Newbie Join Date: Sep 2008 Location: bermuda dunes ca. Posts: 7	Re: 99 ktm65sx part out I'm interusted in forks/tripple clamps & any other small parts to convert to a klx110.Don't need wheel or brakes but do need axle & misc. hardware,how much??thanx craig

09-26-2008, 04:28 PM	#17 (permalink)
j440 2nd Gear Member Join Date: Oct 2007 Location: CT Posts: 368	Re: 99 ktm65sx part out 125 for the forks/triples/risers 145 if you want the front fender/number plate

09-26-2008, 04:34 PM	#18 (permalink)
CRAGARS PM Newbie Join Date: Sep 2008 Location: bermuda dunes ca. Posts: 7	Re: 99 ktm65sx part out Dont want the plastic,does 125. include axle &nut?Also does lower fork tube have disc mount boss??

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

09-26-2008, 05:27 PM	#19 (permalink)
j440 2nd Gear Member Join Date: Oct 2007 Location: CT Posts: 368	Re: 99 ktm65sx part out yessir it does, and the lower left fork leg has a mount for the caliper yes

09-28-2008, 07:52 AM	#20 (permalink)
j440 2nd Gear Member Join Date: Oct 2007 Location: CT Posts: 368	Re: 99 ktm65sx part out bumppppppp swinger/rear shock/front wheel/rear wheel are gone everything else still available.