Planet Minis

reynolds_brad · 10-30-2007, 03:21 PM

Hey Guys, just clearing out some of my older stuff and looking to scrape up some funds for the chaly.

First item is a NSR swingarm thats been modded to work with the ZB shock offset, so you can run NSR wheels with disk brakes. The original NSR shock mount was cut off and the ZB one was welded on in the correct spot to the shock is aligned with the upper shock mount. using the ZB shock mount also gives you the proper ride height so the back end of the bike doesnt ride low. Ive also replaced the OEM bushings at the pivot point with a custom roller needle bearing app i came up with . Two needle bearings were pressed in at both ends and a custom slider insert was machined. This is a one of a kind job, and is Much better then the original design. no binding, ive had a 1/2 ton press on it and the swingarm still spinns free. The swingarm has also been powdercoated by west coast powdercoat with a flat black finish.

I was 175.00 for the swingarm shipped state side. Im located in San Francisco.

there is one small ding in the swingarm as shown in this picture.

reynolds_brad · 10-30-2007, 03:33 PM

Next item up is a Triple that can be used to mount 12" wheels. the lower is a pre95 NSR triple that has the steering stops cut off and welded back on in the correct spots to match the ZB stop to stop. This triple provides the needed offset for the larger 12" wheel. the top triple is a SPI piece.

200.00

DC50 · 10-30-2007, 04:00 PM

how much for the whole bike.

reynolds_brad · 10-30-2007, 04:44 PM

Quote:

Originally Posted by DC50

how much for the whole bike.

Ill put a price tag on the ZB when im finished, needs some paint and a few things still.

jmurray192 · 10-31-2007, 11:06 PM

Quote:

Originally Posted by reynolds_brad

Ill put a price tag on the ZB when im finished, needs some paint and a few things still.

hey ive got 3k on it

let me know.... lol i wish

reynolds_brad · 11-01-2007, 08:11 AM

Quote:

Originally Posted by jmurray192

hey ive got 3k on it

let me know.... lol i wish

Thats not even half way there buddy.

fastbmw · 11-01-2007, 06:19 PM

I'll give you $6 and a handful of subway coupons? haha that bike is coming together wicked.

chriswilder · 02-15-2008, 11:23 PM

trying to see if you still had the triple tree set up i tried an email earlier but my phone was tweakin

thanks

shawnbassett26 · 02-21-2008, 12:05 PM

I might be interested in the swing arm, Know anyone who might have a set of six or three spokers?

10-30-2007, 03:21 PM	#1 (permalink)
reynolds_brad Advertiser Join Date: Dec 2003 Location: San Francisco, CA Posts: 2,471 Awards Showcase Total Awards: 2	Some ZB to NSR conversion parts for sale Hey Guys, just clearing out some of my older stuff and looking to scrape up some funds for the chaly. First item is a NSR swingarm thats been modded to work with the ZB shock offset, so you can run NSR wheels with disk brakes. The original NSR shock mount was cut off and the ZB one was welded on in the correct spot to the shock is aligned with the upper shock mount. using the ZB shock mount also gives you the proper ride height so the back end of the bike doesnt ride low. Ive also replaced the OEM bushings at the pivot point with a custom roller needle bearing app i came up with . Two needle bearings were pressed in at both ends and a custom slider insert was machined. This is a one of a kind job, and is Much better then the original design. no binding, ive had a 1/2 ton press on it and the swingarm still spinns free. The swingarm has also been powdercoated by west coast powdercoat with a flat black finish. I was 175.00 for the swingarm shipped state side. Im located in San Francisco. there is one small ding in the swingarm as shown in this picture. __________________ pecore nere ufficiose Honda50.com Last edited by reynolds_brad; 10-30-2007 at 03:35 PM.

10-30-2007, 03:33 PM	#2 (permalink)
reynolds_brad Advertiser Join Date: Dec 2003 Location: San Francisco, CA Posts: 2,471 Awards Showcase Total Awards: 2	Re: Some ZB to NSR conversion parts for sale Next item up is a Triple that can be used to mount 12" wheels. the lower is a pre95 NSR triple that has the steering stops cut off and welded back on in the correct spots to match the ZB stop to stop. This triple provides the needed offset for the larger 12" wheel. the top triple is a SPI piece. 200.00 __________________ pecore nere ufficiose Honda50.com Last edited by reynolds_brad; 10-30-2007 at 03:37 PM.

10-30-2007, 04:00 PM	#3 (permalink)
DC50 3rd Gear Member Join Date: Jul 2005 Location: Edmonton,AB,Canada Posts: 4,524	Re: Some ZB to NSR conversion parts for sale how much for the whole bike.

11-01-2007, 06:19 PM	#7 (permalink)
fastbmw 2nd Gear Member Join Date: Sep 2005 Posts: 604	Re: Some ZB to NSR conversion parts for sale I'll give you $6 and a handful of subway coupons? haha that bike is coming together wicked.

02-15-2008, 11:23 PM	#8 (permalink)
chriswilder 1st Gear Member Join Date: Feb 2008 Location: jacksonville fl. Posts: 110	Re: Some ZB to NSR conversion parts for sale trying to see if you still had the triple tree set up i tried an email earlier but my phone was tweakin thanks

02-21-2008, 12:05 PM	#9 (permalink)
shawnbassett26 2nd Gear Member Join Date: Feb 2008 Location: Orlando FL Posts: 676	Re: Some ZB to NSR conversion parts for sale I might be interested in the swing arm, Know anyone who might have a set of six or three spokers?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)