Planet Minis

froggie3kb · 08-02-2008, 09:00 PM

Havent really heard to much on these since the release, so I was just curious if anyones ran the setup yet and there opinions and luck with it/etc...

Thanks guys

darkrider001 · 08-03-2008, 08:22 AM

Mines on. 170 w/V2 done by mark @AHP. Holy crap, huge difference.

Take care with assembly, check tolerances, test fit, clean,lube,triple check everything. Fresh oil right after break-in. Careful when kick starting. slowly depress the kicker till it comes up to TDC, with light pressure still on the kicker, one smooth continuous kick all the way through. Note: I allways open the throttle 1/4 to 3/8 turn. Lights up 1st try every time.

HACKMUNCH · 08-03-2008, 08:37 AM

Word of advise, dont touch the throttle on start up or you will be replacing cases asap.

daimojay · 08-03-2008, 02:04 PM

kick is more likely with an open throttle.

darkrider001 · 08-03-2008, 02:47 PM

Quote:

Originally Posted by HACKMUNCH

Word of advise, dont touch the throttle on start up or you will be replacing cases asap.

yeah i've heard. mine kicks back closed thottle. open the throttle 1/4 or so, no kick back, lights right up.

hack, have you ever checked the compression on your builds. This kit is accually quite low. 155psi. the stock yx 150 was 140psi with about 4 hours of run time on it.

froggie3kb · 08-06-2008, 10:15 PM

Quote:

Originally Posted by darkrider001

Mines on. 170 w/V2 done by mark @AHP. Holy crap, huge difference.

Take care with assembly, check tolerances, test fit, clean,lube,triple check everything. Fresh oil right after break-in. Careful when kick starting. slowly depress the kicker till it comes up to TDC, with light pressure still on the kicker, one smooth continuous kick all the way through. Note: I allways open the throttle 1/4 to 3/8 turn. Lights up 1st try every time.

So you your 150 before the 170cc setup then? I've read countless rave reviews on the 165 setup but I just feel like i'd kick myself in the ass for not spending a couple extra bucks for a few more cc's even though I dont really need the power anyways haha.

Thanks for the tips and review man, really appreciate it. Oh yeah, I did my research before ordering my bike and thats the number 1 thing i'm picky on is how I start the bike from TDC. I also give mine just a little bit of throttle and she fires up 1st kick every time, been wondering if I was the only one that had to do that though...

Quote:

Originally Posted by HACKMUNCH

Word of advise, dont touch the throttle on start up or you will be replacing cases asap.

Thank you for the advice Hack, PM sent...

vetdan · 08-07-2008, 03:11 AM

Try putting the bike in 1st gear and pulling the bike backwards until it stops. Put it in neutral and give it one swift kick with no throttle. It's much better than trying to go through to just below TDC with the lever.

FinBastard · 08-07-2008, 05:17 AM

What's TDC?

darkrider001 · 08-07-2008, 05:27 AM

piston at top dead center on the compression stroke.

darkrider001 · 08-07-2008, 10:08 AM

Thanks for the tips and review man, really appreciate it. Oh yeah, I did my research before ordering my bike and thats the number 1 thing i'm picky on is how I start the bike from TDC. I also give mine just a little bit of throttle and she fires up 1st kick every time, been wondering if I was the only one that had to do that though...

you can never have enough power, it helps make up for bad ridin

You know, all motors aren't really the same( so to say). What works for one may be different for another. If you become one with the bike("miagi voice" DANIEL SON) It'll tell you what it needs.

Not sure if TB is still making the 165, may just be the 170 now. Just do it!

Plan on changing the piston after a few hours, just like the big bikes. Just to be safe. Change your oil every ride.

LaOGM · 08-07-2008, 02:38 PM

How do you determine TDC before you crank? What am i missing here?

darkrider001 · 08-07-2008, 06:05 PM

You know that kicker thingy on the right side of the motor

, slowly depress until you get maximum resistance on your foot. I like to go just slightly(what feels like it ) beyond, And then kick through.

Brandonbmw · 08-07-2008, 06:10 PM

i attempted to kick my 165v2 with out being at tdc.

lets just say, i need a new kicker. lol. shatterd son.

LaOGM · 08-07-2008, 06:25 PM

Quote:

Originally Posted by Brandonbmw

i attempted to kick my 165v2 with out being at tdc.

lets just say, i need a new kicker. lol. shatterd son.

I have a 165 v2 and get huge kick back. Still not sure how to get tdc before you kick. Where does the piston stop on a unsucessfull kickstart?

darkrider001 · 08-07-2008, 06:32 PM

Quote:

Originally Posted by LaOGM

I have a 165 v2 and get huge kick back. Still not sure how to get tdc before you kick. Where does the piston stop on a unsucessfull kickstart?

do you have an IRK or flywheel?

LaOGM · 08-07-2008, 08:06 PM

Quote:

Originally Posted by darkrider001

do you have an irk or flywheel?

irk

TheCRKid · 08-07-2008, 08:33 PM

Quote:

Originally Posted by HACKMUNCH

Word of advise, dont touch the throttle on start up or you will be replacing cases asap.

i keep telling guys the same thing for the last few years since the 131cc ,,,,,,,dont touch the throttle when starting

Paxracing · 08-07-2008, 08:37 PM

TRY a 35 CAM it will make it ezer to start.

keith42 · 08-07-2008, 08:50 PM

can you run a S35 cam with the stock springs?

chasetheface123 · 08-07-2008, 09:26 PM

i think im gettin one of these kits so ill tell u guys how i like it

08-02-2008, 09:00 PM	#1 (permalink)
froggie3kb 1st Gear Member Join Date: Oct 2007 Location: Rossville, GA Posts: 174	Anyone running the TB 170cc BBK on there YX150? Havent really heard to much on these since the release, so I was just curious if anyones ran the setup yet and there opinions and luck with it/etc... Thanks guys

08-03-2008, 08:22 AM	#2 (permalink)
darkrider001 1st Gear Member Join Date: Aug 2007 Location: Rhode Island Posts: 133	Re: Anyone running the TB 170cc BBK on there YX150? Mines on. 170 w/V2 done by mark @AHP. Holy crap, huge difference. Take care with assembly, check tolerances, test fit, clean,lube,triple check everything. Fresh oil right after break-in. Careful when kick starting. slowly depress the kicker till it comes up to TDC, with light pressure still on the kicker, one smooth continuous kick all the way through. Note: I allways open the throttle 1/4 to 3/8 turn. Lights up 1st try every time.

08-03-2008, 08:37 AM	#3 (permalink)
HACKMUNCH 3rd Gear Member Join Date: Apr 2006 Location: BRUNSWICK OHIO Posts: 4,489	Re: Anyone running the TB 170cc BBK on there YX150? Word of advise, dont touch the throttle on start up or you will be replacing cases asap.

08-03-2008, 02:04 PM	#4 (permalink)
daimojay 1st Gear Member Join Date: Apr 2008 Location: australia Posts: 187	Re: Anyone running the TB 170cc BBK on there YX150? kick is more likely with an open throttle.

08-07-2008, 03:11 AM	#7 (permalink)
vetdan 1st Gear Member Join Date: Dec 2005 Location: Maryland Posts: 196	Re: Anyone running the TB 170cc BBK on there YX150? Try putting the bike in 1st gear and pulling the bike backwards until it stops. Put it in neutral and give it one swift kick with no throttle. It's much better than trying to go through to just below TDC with the lever.

08-07-2008, 05:17 AM	#8 (permalink)
FinBastard PM Newbie Join Date: Nov 2005 Posts: 17	Re: Anyone running the TB 170cc BBK on there YX150? What's TDC?

08-07-2008, 05:27 AM	#9 (permalink)
darkrider001 1st Gear Member Join Date: Aug 2007 Location: Rhode Island Posts: 133	Re: Anyone running the TB 170cc BBK on there YX150? piston at top dead center on the compression stroke.

08-07-2008, 10:08 AM	#10 (permalink)
darkrider001 1st Gear Member Join Date: Aug 2007 Location: Rhode Island Posts: 133	Re: Anyone running the TB 170cc BBK on there YX150? Thanks for the tips and review man, really appreciate it. Oh yeah, I did my research before ordering my bike and thats the number 1 thing i'm picky on is how I start the bike from TDC. I also give mine just a little bit of throttle and she fires up 1st kick every time, been wondering if I was the only one that had to do that though... you can never have enough power, it helps make up for bad ridin You know, all motors aren't really the same( so to say). What works for one may be different for another. If you become one with the bike("miagi voice" DANIEL SON) It'll tell you what it needs. Not sure if TB is still making the 165, may just be the 170 now. Just do it! Plan on changing the piston after a few hours, just like the big bikes. Just to be safe. Change your oil every ride.

08-07-2008, 02:38 PM	#11 (permalink)
LaOGM 1st Gear Member Join Date: Mar 2008 Location: denham springs, LA Posts: 163	Re: Anyone running the TB 170cc BBK on there YX150? How do you determine TDC before you crank? What am i missing here?

08-07-2008, 06:05 PM	#12 (permalink)
darkrider001 1st Gear Member Join Date: Aug 2007 Location: Rhode Island Posts: 133	Re: Anyone running the TB 170cc BBK on there YX150? You know that kicker thingy on the right side of the motor, slowly depress until you get maximum resistance on your foot. I like to go just slightly(what feels like it ) beyond, And then kick through.

08-07-2008, 06:10 PM	#13 (permalink)
Brandonbmw 3rd Gear Member Join Date: Apr 2007 Location: Corona, Ca Posts: 1,037	Re: Anyone running the TB 170cc BBK on there YX150? i attempted to kick my 165v2 with out being at tdc. lets just say, i need a new kicker. lol. shatterd son.

08-07-2008, 08:37 PM	#18 (permalink)
Paxracing Advertiser Join Date: Mar 2004 Location: ca Posts: 2,687	Re: Anyone running the TB 170cc BBK on there YX150? TRY a 35 CAM it will make it ezer to start. __________________ WWW.PAXRACINGSTORE.COM (818) 897-0373 EMAIL PAXRACING@AOL.COM IF YOU DONT SEE IT JUST E MAIL _________________________________

08-07-2008, 08:50 PM	#19 (permalink)
keith42 2nd Gear Member Join Date: Nov 2007 Location: sumner, wa Posts: 466	Re: Anyone running the TB 170cc BBK on there YX150? can you run a S35 cam with the stock springs?

08-07-2008, 09:26 PM	#20 (permalink)
chasetheface123 3rd Gear Member Join Date: Nov 2007 Location: Boyne City Michigan Posts: 1,848	Re: Anyone running the TB 170cc BBK on there YX150? i think im gettin one of these kits so ill tell u guys how i like it

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)