Planet Minis

TheCRKid · 05-21-2008, 11:56 AM

We have the new batch in stock of OGM 150 SX
also a TON of parts to support the bikes
see link our ogm section
TboltUSA

froggie3kb · 06-20-2008, 06:09 PM

Bump for a very helpful vendor, couldnt ask for a nicer guy...

Smokeum28 · 06-20-2008, 06:46 PM

Quote:

Originally Posted by froggie3kb

Bump for a very helpful vendor, couldnt ask for a nicer guy...

+1

TheCRKid · 07-28-2008, 09:04 PM

we have some sweet deals to be had on the very popular OGM 150sx
killer bike
see the video
TBolt USA, LLC » Pitbikes » O G M » .O G M 150 SX PRO 2008

PLEASE CALL , EMAIL OR PM IF YOU NEED A OGM
FIND A BETTER PRICE
WE WILL TRY TO MATCH OR BEAT IT

TheCRKid · 08-02-2008, 10:50 PM

Special prices on last few OGM 150SX

TheCRKid · 08-05-2008, 10:26 PM

OGM has all the top of the line running gear
billet hubs ,great suspension
ALSO
rim locks ,shock cover ,fender brace and braided steel clutch and front brake lines

Joshtee · 08-07-2008, 08:16 PM

Vince, what carbs do these bikes come with? Mine says 24 on the air cleaner side. Does that have to do w/ the size (24mm carb?). I thought these bikes came w/ 26mm carbs.

TheCRKid · 08-07-2008, 08:29 PM

Quote:

Originally Posted by Joshtee

Vince, what carbs do these bikes come with? Mine says 24 on the air cleaner side. Does that have to do w/ the size (24mm carb?). I thought these bikes came w/ 26mm carbs.

please remember we dont build or spec these bikes
(even my suggestion of 160cc was "stupid")
they come with mikuni carbs
TBolt USA, LLC » Pitbike Engine Parts » CARB KITS » Jet kit for China Mikuni
i took the time to review team and customer specs ,match up jet to suite this type of carb
and assemble a jet kit

Joshtee · 08-07-2008, 08:41 PM

Quote:

Originally Posted by TheCRKid

please remember we dont build or spec these bikes
(even my suggestion of 160cc was "stupid")
they come with mikuni carbs
TBolt USA, LLC » Pitbike Engine Parts » CARB KITS » Jet kit for China Mikuni
i took the time to review team and customer specs ,match up jet to suite this type of carb
and assemble a jet kit

hmmm. So, how do I Identify the carb I have? I know you don't build these bikes, but do you know what size carb they come with?

TheCRKid · 08-07-2008, 09:30 PM

joshtee
im not sure were this is leading ,but the pitbikes came from china as do the carbs
china mikuni
you have jets (or should soon),see how it runs
check your plug ,,,,all the normal tuning procedure

the LAOGM crew found 20 pilot / 97.5 main to be a good set up

if you going to built the motor up you may want to upgrade to a larger carb

Joshtee · 08-07-2008, 09:50 PM

Quote:

Originally Posted by TheCRKid

joshtee
im not sure were this is leading ,but the pitbikes came from china as do the carbs
china mikuni
you have jets (or should soon),see how it runs
check your plug ,,,,all the normal tuning procedure

the LAOGM crew found 20 pilot / 97.5 main to be a good set up

if you going to built the motor up you may want to upgrade to a larger carb

Just trying to I.D. my carb

, that's all. Just for my own info. I guess I will ask someone else?

I have no doubt I will be able to tune the carb w/ your kit. That is really not what I was asking about. Just carb size info.

I will PM you w/ any further questions.

CJsDad · 08-07-2008, 09:54 PM

Quote:

Originally Posted by Joshtee

Just trying to I.D. my carb

, that's all. Just for my own info. I guess I will ask someone else?

I have no doubt I will be able to tune the carb w/ your kit. That is really not what I was asking about. Just carb size info.

I will PM you w/ any further questions.

The carb is stamped 24 on the side. The carb is 26 mm at the slide but tapers to 24 mm on the ends. It is not a real Mikuni carb but the VM24 jets fit in it. The VM 26 jets are different especially the pilot jet.

TheCRKid · 08-07-2008, 10:01 PM

Quote:

Originally Posted by CJsDad

The carb is stamped 24 on the side. The carb is 26 mm at the slide but tapers to 24 mm on the ends. It is not a real Mikuni carb but the VM24 jets fit in it. The VM 26 jets are different especially the pilot jet.

my point exactly
all the pitbikes that have mikuni carbs are "copy" carbs
you cant ID it against say sudco because the same units not listed and never will be
some china carbs work great like these and the 22mm mikuni flange mount
but there not japan mikuni

CJsDad · 08-07-2008, 10:14 PM

Joshtee,
You just need to try different pilots and play with the needle clip position. We have a couple of these carbs and none of them are the same jetting. Some guys find a 20 pilot to work well where ours will not run on that pilot. Once you get the pilot set and needle clip position, the carb works quite well. We also found the air filters for a 26mm carb seem to fall off easily but we put a Uni filter from a 22mm carb we had on ours. They go on a little tight but they don't fall off.

Sorry to jack your thread Vince. Just passing on some carb info we have found out.

Joshtee · 08-08-2008, 12:01 AM

Quote:

Originally Posted by CJsDad

The carb is stamped 24 on the side. The carb is 26 mm at the slide but tapers to 24 mm on the ends. It is not a real Mikuni carb but the VM24 jets fit in it. The VM 26 jets are different especially the pilot jet.

CJsDad, thank you for answering my question!

Joshtee · 08-08-2008, 09:15 AM

Quote:

Originally Posted by CJsDad

Joshtee,
You just need to try different pilots and play with the needle clip position. We have a couple of these carbs and none of them are the same jetting. Some guys find a 20 pilot to work well where ours will not run on that pilot. Once you get the pilot set and needle clip position, the carb works quite well. We also found the air filters for a 26mm carb seem to fall off easily but we put a Uni filter from a 22mm carb we had on ours. They go on a little tight but they don't fall off.

Sorry to jack your thread Vince. Just passing on some carb info we have found out.

I have the same problem w/ the Uni filter I ordered. This kinda stuff is the reason I was looking for more info/specs on this carb.

MXDAD185 · 08-08-2008, 09:35 AM

vince is a great guy he will even talk to you on the phone, i've left him a messege's before, he's allway's called me wright back, he work's hard to help you if any problem's, so as far as getting a new ogm or getting part's t-bolt is the only way to go!!

TheCRKid · 08-08-2008, 09:36 AM

Quote:

Originally Posted by CJsDad

Joshtee,
You just need to try different pilots and play with the needle clip position. We have a couple of these carbs and none of them are the same jetting. Some guys find a 20 pilot to work well where ours will not run on that pilot. Once you get the pilot set and needle clip position, the carb works quite well. We also found the air filters for a 26mm carb seem to fall off easily but we put a Uni filter from a 22mm carb we had on ours. They go on a little tight but they don't fall off.

Sorry to jack your thread Vince. Just passing on some carb info we have found out.

cj lets start a new thread about the new mikuni copy carbs in the china minis section

TheCRKid · 08-20-2008, 06:24 PM

ONE ogm sx150 needs a home

call for a great deal

fastbrother7 · 09-15-2008, 04:15 PM

Did i buy that last one?

05-21-2008, 11:56 AM	#1 (permalink)
TheCRKid Advertiser Join Date: Jan 2005 Posts: 3,775	OGM Pitbikes at T BOLT USA We have the new batch in stock of OGM 150 SX also a TON of parts to support the bikes see link our ogm section TboltUSA __________________ T Bolt USA ALL top Pitbikes ,Engines and Parts for Pitbikes & Minis Website Contact THECRKID@TBOLTUSA.COM or Call 215-630-3554

06-20-2008, 06:09 PM	#2 (permalink)
froggie3kb 1st Gear Member Join Date: Oct 2007 Location: Rossville, GA Posts: 177	Re: OGM Pitbikes at T BOLT USA Bump for a very helpful vendor, couldnt ask for a nicer guy...

07-28-2008, 09:04 PM	#4 (permalink)
TheCRKid Advertiser Join Date: Jan 2005 Posts: 3,775	Re: OGM Pitbikes at T BOLT USA we have some sweet deals to be had on the very popular OGM 150sx killer bike see the video TBolt USA, LLC » Pitbikes » O G M » .O G M 150 SX PRO 2008 PLEASE CALL , EMAIL OR PM IF YOU NEED A OGM FIND A BETTER PRICE WE WILL TRY TO MATCH OR BEAT IT __________________ T Bolt USA ALL top Pitbikes ,Engines and Parts for Pitbikes & Minis Website Contact THECRKID@TBOLTUSA.COM or Call 215-630-3554 Last edited by TheCRKid; 08-01-2008 at 11:29 AM.

08-02-2008, 10:50 PM	#5 (permalink)
TheCRKid Advertiser Join Date: Jan 2005 Posts: 3,775	Re: OGM Pitbikes at T BOLT USA Special prices on last few OGM 150SX __________________ T Bolt USA ALL top Pitbikes ,Engines and Parts for Pitbikes & Minis Website Contact THECRKID@TBOLTUSA.COM or Call 215-630-3554

08-05-2008, 10:26 PM	#6 (permalink)
TheCRKid Advertiser Join Date: Jan 2005 Posts: 3,775	Re: OGM Pitbikes at T BOLT USA OGM has all the top of the line running gear billet hubs ,great suspension ALSO rim locks ,shock cover ,fender brace and braided steel clutch and front brake lines __________________ T Bolt USA ALL top Pitbikes ,Engines and Parts for Pitbikes & Minis Website Contact THECRKID@TBOLTUSA.COM or Call 215-630-3554

08-07-2008, 08:16 PM	#7 (permalink)
Joshtee 1st Gear Member Join Date: Feb 2006 Posts: 131	Re: OGM Pitbikes at T BOLT USA Vince, what carbs do these bikes come with? Mine says 24 on the air cleaner side. Does that have to do w/ the size (24mm carb?). I thought these bikes came w/ 26mm carbs.

08-07-2008, 09:30 PM	#10 (permalink)
TheCRKid Advertiser Join Date: Jan 2005 Posts: 3,775	Re: OGM Pitbikes at T BOLT USA joshtee im not sure were this is leading ,but the pitbikes came from china as do the carbs china mikuni you have jets (or should soon),see how it runs check your plug ,,,,all the normal tuning procedure the LAOGM crew found 20 pilot / 97.5 main to be a good set up if you going to built the motor up you may want to upgrade to a larger carb __________________ T Bolt USA ALL top Pitbikes ,Engines and Parts for Pitbikes & Minis Website Contact THECRKID@TBOLTUSA.COM or Call 215-630-3554

08-07-2008, 10:14 PM	#14 (permalink)
CJsDad 3rd Gear Member Join Date: Jan 2007 Location: BrookPark, Ohio Posts: 1,357	Re: OGM Pitbikes at T BOLT USA Joshtee, You just need to try different pilots and play with the needle clip position. We have a couple of these carbs and none of them are the same jetting. Some guys find a 20 pilot to work well where ours will not run on that pilot. Once you get the pilot set and needle clip position, the carb works quite well. We also found the air filters for a 26mm carb seem to fall off easily but we put a Uni filter from a 22mm carb we had on ours. They go on a little tight but they don't fall off. Sorry to jack your thread Vince. Just passing on some carb info we have found out.

08-08-2008, 09:35 AM	#17 (permalink)
MXDAD185 1st Gear Member Join Date: Feb 2008 Location: CHATTANOOGA,TN Posts: 165	Re: OGM Pitbikes at T BOLT USA vince is a great guy he will even talk to you on the phone, i've left him a messege's before, he's allway's called me wright back, he work's hard to help you if any problem's, so as far as getting a new ogm or getting part's t-bolt is the only way to go!!

08-20-2008, 06:24 PM	#19 (permalink)
TheCRKid Advertiser Join Date: Jan 2005 Posts: 3,775	Re: OGM Pitbikes at T BOLT USA ONE ogm sx150 needs a home call for a great deal __________________ T Bolt USA ALL top Pitbikes ,Engines and Parts for Pitbikes & Minis Website Contact THECRKID@TBOLTUSA.COM or Call 215-630-3554

09-15-2008, 04:15 PM	#20 (permalink)
fastbrother7 PM Newbie Join Date: Sep 2008 Location: USA Posts: 12	Re: OGM Pitbikes at T BOLT USA Did i buy that last one?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)