| |||||||
 |
 | | LinkBack | Thread Tools | |
06-29-2008, 05:16 PM
| #1 (permalink) |
| 1st Gear Member  Join Date: May 2007 Location: NH
Posts: 205
|  revs out in 2nd cant maintain power in 3rd any suggestions on what to do to get rid of this problem? I was thinking the jets in the carb might have been the prob but idk for sure... |
|  |
|
06-29-2008, 07:38 PM
| #2 (permalink) |
| 3rd Gear Member  Join Date: Dec 2006 Location: Austin, Texas
Posts: 2,206
| Re: revs out in 2nd cant maintain power in 3rd Port your head? Or better cam? |
|
| |
|
06-29-2008, 07:42 PM
| #3 (permalink) |
| 3rd Gear Member  Join Date: May 2006 Location: Pennsylvania
Posts: 7,352
| Re: revs out in 2nd cant maintain power in 3rd My guess is your bike is in correct form but needs a gearing change for your conditions. I know my stock 110 would never pull third gear on a track with stock gearing. |
|
| |
|
06-29-2008, 07:45 PM
| #4 (permalink) |
| 2nd Gear Member  Join Date: Feb 2007 Location: Everythings bigger in, Houston
Posts: 875
| Re: revs out in 2nd cant maintain power in 3rd Yea if its revving out its not jetting, just your gearing. I went down in the front and it helped a little bit. |
|
| |
|
07-01-2008, 02:35 PM
| #5 (permalink) |
| 1st Gear Member Join Date: May 2007 Location: NH
Posts: 205
| Re: revs out in 2nd cant maintain power in 3rd well im running a stock front and 38 rear, and the 65 rear wheel im going to stick on there is a 47 i think, im looking more for supercross gearing, so what should i try out? |
|
| |
|
07-01-2008, 02:51 PM
| #6 (permalink) |
| 1st Gear Member  Join Date: Feb 2005 Location: Cheltenham, UK
Posts: 116
| Re: revs out in 2nd cant maintain power in 3rd I run a 12 on the front and a 39 on the rear . Pulls like a train in all gears..(110 superstock set up) |
|
| |
|
08-06-2008, 04:04 PM
| #7 (permalink) |
| 2nd Gear Member  Join Date: Apr 2007 Location: Salina, Kansas
Posts: 473
| Re: revs out in 2nd cant maintain power in 3rd so 12/39 a good set up to get the most out of it, On my it almost feels faster in 2nd then 3rd |
|
| |
|
08-06-2008, 04:16 PM
| #8 (permalink) |
| 3rd Gear Member  Join Date: Jun 2008 Location: Glendale California
Posts: 1,187
| Re: revs out in 2nd cant maintain power in 3rd do a 15-16 front and a 32-35 rear. BTW wut engine are you running? |
| |
|
08-06-2008, 04:18 PM
| #9 (permalink) |
| 2nd Gear Member Join Date: Apr 2007 Location: Salina, Kansas
Posts: 473
| Re: revs out in 2nd cant maintain power in 3rd It stock I got a fmf 4.1 chock mod , Uni air filter and 85 40 jets |
|
| |
|
08-06-2008, 09:03 PM
| #10 (permalink) |
| 2nd Gear Member  Join Date: Feb 2007 Location: Brunswick, Ohio
Posts: 521
| Re: revs out in 2nd cant maintain power in 3rd I have the same gearing with a stock motor less a cam, pipe and clutch. I have that problem sometimes, It just depends on the track conditions. It seems like it needs space to build up the revs in third. I get into situations where third is too tall, and second is over revving. Anything up hill seems to need second gear, or if there are deep ruts. I just attribute it to riding a stock 110. ---L*64 |
|
| |
|
| Bookmarks |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| |
