Planet Minis

bbrklx110 · 08-11-2008, 12:21 AM

how do i modify the valve releif on a piston.do i have to take it somewhere or can i do it myself.also is it expensive to have done.thanks

2wheeltyson · 08-11-2008, 04:40 AM

i did a 160 piston to clear my +R head. i used a dremel and a steady hand. just make sure you use clay b4 and after. on mine i didn't need to go any deeper just wider and at more angle.

08-11-2008, 12:21 AM	#1 (permalink)
bbrklx110 1st Gear Member Join Date: Dec 2007 Location: ohio Posts: 117	piston modification how do i modify the valve releif on a piston.do i have to take it somewhere or can i do it myself.also is it expensive to have done.thanks

08-11-2008, 04:40 AM	#2 (permalink)
2wheeltyson 3rd Gear Member Join Date: May 2005 Location: michigan Posts: 1,531	Re: piston modification i did a 160 piston to clear my +R head. i used a dremel and a steady hand. just make sure you use clay b4 and after. on mine i didn't need to go any deeper just wider and at more angle.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)