Planet Minis

randee832 · 08-10-2008, 09:34 PM

2004 KLX 110
Tag X5 Supermini bars
KX65 pegs with crf250 Peg springs
Custom Vented front plate
ASV front brake lever
Gold kx60 front wheel
Heavy front springs
Heavey rear spring
Custom plus 2 added to stock swinger
N-style seat cover

wayfastwhitey · 08-10-2008, 09:37 PM

u get that stuff from k0by

randee832 · 08-10-2008, 09:38 PM

PHATDAN420 · 08-10-2008, 10:16 PM

Diggin the seat brooo...the best part of the bike..hahah

randee832 · 08-10-2008, 10:36 PM

Thanks i actually have the shroud graphics that go with the seat but im just over the black plastics for now.

ROBINSONDB22 · 08-10-2008, 11:00 PM

that extended swinger looks sketchy is it solid?

SUZUKIRM12594 · 08-10-2008, 11:02 PM

Quote:

Originally Posted by ROBINSONDB22

that extended swinger looks sketchy is it solid?

Looks like welded iron or steel...Should be if it was done corectly. Nice way to keep within a budget.

SUZUKIRM12594 · 08-10-2008, 11:03 PM

Where did you get the vented # plate from??? I know cycra makes vented but dont know where to get one that would fit a mini...

randee832 · 08-10-2008, 11:08 PM

Yea its pretty solid who ever added it took their time.
I used my stock one and cut it out after seeing how the one on my big bike was done.

SUZUKIRM12594 · 08-10-2008, 11:10 PM

Quote:

Originally Posted by randee832

Yea its pretty solid who ever added it took their time.
I used my stock one and cut it out after seeing how the one on my big bike was done.

Now those are some crazy cool Ideas you got there. How did you get the cuts so perfect? Can you explain the process in doin so? I'd really appreciate it...Thanx

randee832 · 08-10-2008, 11:13 PM

Hhaha alot of patience is how. I basically marked a rough line with a sharpy (take off with carb cleaner) and cut it out with a die grinder then started shaving it with a razor knife and used a round file for the sharp degree in the corners and used sand paper to get the rough burs off at the end. It took me about an hr to just shave it down.

SUZUKIRM12594 · 08-10-2008, 11:17 PM

Aiight cool. Thanx!!! I'll definately be tryin that once my number/backing wears out.

randee832 · 08-10-2008, 11:19 PM

The screen is just the cheap plastic vent stuff at walmarts but it will do till i find the right metal wire mesh i want. But another tip i learned was get one side to where you want it to stop then messure that and make marks to shave too.

koby686 · 08-10-2008, 11:52 PM

that swingarm is solid my friend building prerunner roll cages hes the one that made that one for me.

randee832 · 08-11-2008, 12:06 AM

yea it looks really solid thats for sure.

08-10-2008, 09:34 PM	#1 (permalink)
randee832 1st Gear Member Join Date: Jan 2006 Location: Valley Alabama Posts: 212	My stocker build. 2004 KLX 110 Tag X5 Supermini bars KX65 pegs with crf250 Peg springs Custom Vented front plate ASV front brake lever Gold kx60 front wheel Heavy front springs Heavey rear spring Custom plus 2 added to stock swinger N-style seat cover

08-10-2008, 09:37 PM	#2 (permalink)
wayfastwhitey 3rd Gear Member Join Date: Jan 2008 Location: longbeach cali Posts: 2,378	Re: My stocker build. u get that stuff from k0by

08-10-2008, 09:38 PM	#3 (permalink)
randee832 1st Gear Member Join Date: Jan 2006 Location: Valley Alabama Posts: 212	Re: My stocker build. Yea

08-10-2008, 10:16 PM	#4 (permalink)
PHATDAN420 2nd Gear Member Join Date: Jan 2008 Location: Fort McMurray Alberta Posts: 431	Re: My stocker build. Diggin the seat brooo...the best part of the bike..hahah

08-10-2008, 10:36 PM	#5 (permalink)
randee832 1st Gear Member Join Date: Jan 2006 Location: Valley Alabama Posts: 212	Re: My stocker build. Thanks i actually have the shroud graphics that go with the seat but im just over the black plastics for now.

08-10-2008, 11:00 PM	#6 (permalink)
ROBINSONDB22 3rd Gear Member Join Date: Feb 2007 Location: Columbus, Ohio Posts: 2,441	Re: My stocker build. that extended swinger looks sketchy is it solid?

08-10-2008, 11:03 PM	#8 (permalink)
SUZUKIRM12594 3rd Gear Member Join Date: Jun 2008 Location: Glendale California Posts: 2,449	Re: My stocker build. Where did you get the vented # plate from??? I know cycra makes vented but dont know where to get one that would fit a mini...

08-10-2008, 11:08 PM	#9 (permalink)
randee832 1st Gear Member Join Date: Jan 2006 Location: Valley Alabama Posts: 212	Re: My stocker build. Yea its pretty solid who ever added it took their time. I used my stock one and cut it out after seeing how the one on my big bike was done.

08-10-2008, 11:13 PM	#11 (permalink)
randee832 1st Gear Member Join Date: Jan 2006 Location: Valley Alabama Posts: 212	Re: My stocker build. Hhaha alot of patience is how. I basically marked a rough line with a sharpy (take off with carb cleaner) and cut it out with a die grinder then started shaving it with a razor knife and used a round file for the sharp degree in the corners and used sand paper to get the rough burs off at the end. It took me about an hr to just shave it down.

08-10-2008, 11:17 PM	#12 (permalink)
SUZUKIRM12594 3rd Gear Member Join Date: Jun 2008 Location: Glendale California Posts: 2,449	Re: My stocker build. Aiight cool. Thanx!!! I'll definately be tryin that once my number/backing wears out.

08-10-2008, 11:19 PM	#13 (permalink)
randee832 1st Gear Member Join Date: Jan 2006 Location: Valley Alabama Posts: 212	Re: My stocker build. The screen is just the cheap plastic vent stuff at walmarts but it will do till i find the right metal wire mesh i want. But another tip i learned was get one side to where you want it to stop then messure that and make marks to shave too.

08-10-2008, 11:52 PM	#14 (permalink)
koby686 3rd Gear Member Join Date: Apr 2008 Location: woodland hills, ca. Posts: 1,806	Re: My stocker build. that swingarm is solid my friend building prerunner roll cages hes the one that made that one for me.

08-11-2008, 12:06 AM	#15 (permalink)
randee832 1st Gear Member Join Date: Jan 2006 Location: Valley Alabama Posts: 212	Re: My stocker build. yea it looks really solid thats for sure.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)