Planet Minis

trdboy2485 · 09-05-2008, 04:05 PM

how hard to install these ??

HALL39 · 09-05-2008, 04:15 PM

have to split the cases. so not a 5 min job. cam you will have to take the top end apart.

geof · 09-05-2008, 05:29 PM

Quote:

Originally Posted by trdboy2485

how hard to install these ??

to fit the shift drum means a full strip down - so allow about 5 hours

Have a look here for cam fitting instructions - takes about 30 minutes to 1 hour:

http://www.twobros.com/Cust_Service/...8-045_Inst.pdf

kman153 · 09-05-2008, 05:32 PM

the cam is easy you dont need to take the head off a 110 its a quick job but you have to split the cases for a 4th gear

UpOn2PassingYou · 09-06-2008, 08:50 AM

How hard? Not hard for either. The shift drum can be done within about 3-5 hours depending on how many times you have stripped a jap small motorcycle engine apart.

09-05-2008, 04:05 PM	#1 (permalink)
trdboy2485 PM Newbie Join Date: Aug 2008 Location: high desert , CA Posts: 40	4th gear shift drum? and cam? how hard to install these ??

09-05-2008, 04:15 PM	#2 (permalink)
HALL39 PM Newbie Join Date: Dec 2007 Location: Ontario, Canada Posts: 48	Re: 4th gear shift drum? and cam? have to split the cases. so not a 5 min job. cam you will have to take the top end apart.

09-05-2008, 05:32 PM	#4 (permalink)
kman153 1st Gear Member Join Date: Aug 2008 Location: boston Posts: 218	Re: 4th gear shift drum? and cam? the cam is easy you dont need to take the head off a 110 its a quick job but you have to split the cases for a 4th gear

09-06-2008, 08:50 AM	#5 (permalink)
UpOn2PassingYou PM Newbie Join Date: Apr 2008 Location: Suffield Ohio Posts: 62	Re: 4th gear shift drum? and cam? How hard? Not hard for either. The shift drum can be done within about 3-5 hours depending on how many times you have stripped a jap small motorcycle engine apart.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)