Planet Minis - View Single Post

FastMC · 08-08-2008, 12:11 AM

You should have power going into the ignition switch through the yellow wire. It's AC voltage and only when the engine is running. When you click the ign switch to the headlight position the AC voltage comes from the ignition switch through the brown/red wire, then up to the dimmer switch. It then goes to the headlight through the blue or white wire (high/low). Again...only when the engine is running...And yes pull the rubber grommet from the other side and you can probe the back of the switch... Hope this helps.

08-08-2008, 12:11 AM	#2 (permalink)
FastMC Sporting the Merkin Join Date: Mar 2004 Location: boston area Posts: 4,384 Awards Showcase Total Awards: 1	Re: Help with headlight on CT70K0 You should have power going into the ignition switch through the yellow wire. It's AC voltage and only when the engine is running. When you click the ign switch to the headlight position the AC voltage comes from the ignition switch through the brown/red wire, then up to the dimmer switch. It then goes to the headlight through the blue or white wire (high/low). Again...only when the engine is running...And yes pull the rubber grommet from the other side and you can probe the back of the switch... Hope this helps. __________________ The older I get...The faster I was !!!