Planet Minis

Mike_the_minibike_man · 03-20-2008, 07:53 AM

Quote:

Originally Posted by Manimal

Mike,

If you have the Airtech fairings, contact Rich.......I PM'd you his info. He may be able to assist you getting your fairings to fit. Btw, he also used the stock NSR exhaust.

Keep us informed of what you had to do to get the fairings correctly fitted, for future reference.

ps, our next race is not till April 20th. So more than likely, I won't be seeing him anytime soon. He's 3 hours away from me. Wish I could be more helpful.

Hey thanks for the help you guys, I will for SURE take some pics and maybe even start a "how to fit NSF bodywork on stock NSR" page.

.... then again this DOES give me an excuse to tell my gf that i need to buy a new pipe....

Mike_the_minibike_man · 03-20-2008, 08:02 AM

Oh yeah my buddy has a YSR50 aftermarket twin tip exhuast... looks like the one from team calimari, would that if on my NSR50? He doesn't want it and said I could have it for FREE!

looks like this one

fireman_343 · 03-20-2008, 10:07 AM

Yeah I don't have my lower attached to the bracket on the right side... I ran it all season with no attachment to the lower, other then the upper holding it there. I just put the screw in on the bottom left, only reason I did that is when I crash I didn't want the lower to rip off.

This is what it looks like now, after moving the mounts around a bit to get it to work right...

Manimal · 03-20-2008, 10:35 AM

Quote:

Originally Posted by Mike_the_minibike_man

Oh yeah my buddy has a YSR50 aftermarket twin tip exhuast... looks like the one from team calimari, would that if on my NSR50? He doesn't want it and said I could have it for FREE!

looks like this one

I don't see why not.

Put the twin stinger end up against the NSR exhaust, and carefully select a cutting point (for both pipes), then have the twin stinger end welded to the existing NSR chamber (while mounted on the bike).

Being that I am not a 2-stroke specialist, I have no idea how much it will affect performance of merging the two, if any. May not even be noticable. Altho' I do suggest doing a plug chop before and after. If plug shows richer or leaner, you'll need to adjust (needle or Main jet) accordingly. If no change in color, then, no worries

Mike_the_minibike_man · 03-20-2008, 01:54 PM

I'm only interested in doing it if there are some kind of gains in HP to be made. Otherwise I wouldn't bother.

filthyboatguy · 03-20-2008, 03:46 PM

Quote:

Originally Posted by miniman

I just installed the new bodywork on my NSR that I purchased off of ebay last week. It is a replica of a Honda RS125 that is used in Japan. The bodywork pretty much fits without any major modifications. The only thing that I had to do was cutoff the kickstand mount off of the frame. This was no big deal as I was going to do it anyways. If anyone is interested there is a set on ebay at the moment, and they also have them available for the YSR.

Here are some pics. The next step will be to fit it with a windscreen and send the bodywork off to paint and the NSR 124SE project will be completed.

That bike sucks, I'll take it off you hands for $500

miniman · 03-20-2008, 07:07 PM

LOL! Just add $3000 to the $500 you offered me and we might have a deal!

Indetrucks · 03-21-2008, 07:55 AM

Quote:

Originally Posted by miniman

LOL! Just add $3000 to the $500 you offered me and we might have a deal!

I get all wet when you talk like that!

miniman · 03-24-2008, 08:04 PM

Here are some updates on the bodywork installed on the bike. I have to say that this kit is pretty sick looking. I think it looks better than the NSF. Just my opinion!

filthyboatguy · 03-24-2008, 08:17 PM

Randy says we need to throw the 4spd drum and stroker crank in the 110 to make 121cc and come school you at CMRRA

It's gonna look sweet painted!

When is your next race?

The boys outgrew all their gear, leathers, helmets, boots, gloves since Buttonwillow. I gotta spend like 6 hunny to get them back on the track, and that's in MX gear.

shawnbassett26 · 03-24-2008, 08:30 PM

To be honest.... i was really unsure about the body work... but seeing it on a bike... well im kicking my self in the @$$ for not buying it when i first saw it! Looks great. Im jellous. Hope fully ill get my body soon.... just waiting.

miniman · 03-24-2008, 08:39 PM

Keep your eyes open because I am sure a set will be popping up on ebay. Or if you want I can contact the guy, I am sure he will sell you a set. He told me he had 10 sets made. PM me if you are interested.

Mike_the_minibike_man · 03-24-2008, 08:51 PM

it does look great! but I do like my nsf bodywork better. They both are great I think its a matter of taste.....

I'm so close to getting it on the road... just that darn rear seat frame.

I am seriously thinking of taking a hacksaw to it....

shawnbassett26 · 03-24-2008, 08:55 PM

I have his contact, im buying a front fender from him. I spoke with him the other day befor he put them on ebay. I new about the body before it came out, i just didnt know what it looked like. I went with my orignal plan with AIR-TECH NSF body but my wait time is 2-4 weeks! oh well it will be worth it. Again your bike LOOKS AWSOME! You should paint it like your gas tank/front fender! But what ever you do im sure it will look good. Keep it up!
~Shawn

Manimal · 03-25-2008, 06:47 AM

Looks Great!

looking forward to seeing the completed w/ paint scheme.

Any pix from behind?

I wonder what kind of tail light would look best with that tail section......if I were to use this body work for my "street" NSR.

Indetrucks · 03-25-2008, 02:49 PM

Jason.. all I gotta say is: "Just don't paint it the same color as your 80?"
In fact, go ahead and throw the British flag paint scheme on there for me.

miniman · 03-25-2008, 05:06 PM

So! I take it you don't like my 150's paint scheme!

Cool by me! Don't ask to ride it.....

miniman · 03-25-2008, 05:09 PM

Quote:

Originally Posted by filthyboatguy

Randy says we need to throw the 4spd drum and stroker crank in the 110 to make 121cc and come school you at CMRRA

It's gonna look sweet painted!

When is your next race?

The boys outgrew all their gear, leathers, helmets, boots, gloves since Buttonwillow. I gotta spend like 6 hunny to get them back on the track, and that's in MX gear.

Bring it! It sucks winning all the time... LOL!

Our next race is next weekend out at Willow, I don't know if I am going to make it or not since we had the baby two weeks ago.

Luckystar64 · 03-26-2008, 10:56 AM

That bodywork looks awesome now!!!! I like it way more than the NSF work too. I'd saw off the part on the tail that doesn't mesh with the subframe, then clean it up and shape it with a Dremel. I could see my boot catching that corner that sticks out on it and cracking it off. How hard was it to get on? ---L*64

miniman · 03-26-2008, 04:42 PM

Quote:

Originally Posted by Luckystar64

That bodywork looks awesome now!!!! I like it way more than the NSF work too. I'd saw off the part on the tail that doesn't mesh with the subframe, then clean it up and shape it with a Dremel. I could see my boot catching that corner that sticks out on it and cracking it off. How hard was it to get on? ---L*64

Thanks!
Actually the bodywork went or really easy. The only modifications that I had to do were:
1. Cut off the kickstand mount off of the frame to clear the lower section.
2. I to trim the lower section to clear my shifter and rear brake pedal.

Other than that it fits the bike well as you can see from the pics. The only thing I am not happy is how the subframe sticks out the bottom of the tail section. I will probably end up running the AirTech tail section that was given to me if I cannot get this one to fit better.

03-20-2008, 08:02 AM	#22 (permalink)
Mike_the_minibike_man 1st Gear Member Join Date: Feb 2008 Location: Victoria BC Posts: 117	Re: New NSR bodywork from EBAY! Oh yeah my buddy has a YSR50 aftermarket twin tip exhuast... looks like the one from team calimari, would that if on my NSR50? He doesn't want it and said I could have it for FREE! looks like this one

03-20-2008, 10:07 AM	#23 (permalink)
fireman_343 1st Gear Member Join Date: Mar 2007 Location: Blacklick Ohio Posts: 185	Re: New NSR bodywork from EBAY! Yeah I don't have my lower attached to the bracket on the right side... I ran it all season with no attachment to the lower, other then the upper holding it there. I just put the screw in on the bottom left, only reason I did that is when I crash I didn't want the lower to rip off. This is what it looks like now, after moving the mounts around a bit to get it to work right...

03-20-2008, 01:54 PM	#25 (permalink)
Mike_the_minibike_man 1st Gear Member Join Date: Feb 2008 Location: Victoria BC Posts: 117	Re: New NSR bodywork from EBAY! I'm only interested in doing it if there are some kind of gains in HP to be made. Otherwise I wouldn't bother.

03-20-2008, 07:07 PM	#27 (permalink)
miniman 3rd Gear Member Join Date: Jan 2005 Location: Corona, CA Posts: 1,130	Re: New NSR bodywork from EBAY! LOL! Just add $3000 to the $500 you offered me and we might have a deal!

03-24-2008, 08:04 PM	#29 (permalink)
miniman 3rd Gear Member Join Date: Jan 2005 Location: Corona, CA Posts: 1,130	Re: New NSR bodywork from EBAY! Here are some updates on the bodywork installed on the bike. I have to say that this kit is pretty sick looking. I think it looks better than the NSF. Just my opinion!

03-24-2008, 08:17 PM	#30 (permalink)
filthyboatguy 3rd Gear Member Join Date: Oct 2004 Location: San Diego, CA Posts: 4,780	Re: New NSR bodywork from EBAY! Randy says we need to throw the 4spd drum and stroker crank in the 110 to make 121cc and come school you at CMRRA It's gonna look sweet painted! When is your next race? The boys outgrew all their gear, leathers, helmets, boots, gloves since Buttonwillow. I gotta spend like 6 hunny to get them back on the track, and that's in MX gear. Last edited by filthyboatguy; 03-24-2008 at 08:24 PM.

03-24-2008, 08:30 PM	#31 (permalink)
shawnbassett26 2nd Gear Member Join Date: Feb 2008 Location: Orlando FL Posts: 807	Re: New NSR bodywork from EBAY! To be honest.... i was really unsure about the body work... but seeing it on a bike... well im kicking my self in the @$$ for not buying it when i first saw it! Looks great. Im jellous. Hope fully ill get my body soon.... just waiting.

03-24-2008, 08:39 PM	#32 (permalink)
miniman 3rd Gear Member Join Date: Jan 2005 Location: Corona, CA Posts: 1,130	Re: New NSR bodywork from EBAY! Keep your eyes open because I am sure a set will be popping up on ebay. Or if you want I can contact the guy, I am sure he will sell you a set. He told me he had 10 sets made. PM me if you are interested.

03-24-2008, 08:51 PM	#33 (permalink)
Mike_the_minibike_man 1st Gear Member Join Date: Feb 2008 Location: Victoria BC Posts: 117	Re: New NSR bodywork from EBAY! it does look great! but I do like my nsf bodywork better. They both are great I think its a matter of taste..... I'm so close to getting it on the road... just that darn rear seat frame. I am seriously thinking of taking a hacksaw to it....

03-24-2008, 08:55 PM	#34 (permalink)
shawnbassett26 2nd Gear Member Join Date: Feb 2008 Location: Orlando FL Posts: 807	Re: New NSR bodywork from EBAY! I have his contact, im buying a front fender from him. I spoke with him the other day befor he put them on ebay. I new about the body before it came out, i just didnt know what it looked like. I went with my orignal plan with AIR-TECH NSF body but my wait time is 2-4 weeks! oh well it will be worth it. Again your bike LOOKS AWSOME! You should paint it like your gas tank/front fender! But what ever you do im sure it will look good. Keep it up! ~Shawn

03-25-2008, 06:47 AM	#35 (permalink)
Manimal 1st Gear Member Join Date: Aug 2007 Location: Milpitas, CA Posts: 135	Re: New NSR bodywork from EBAY! Looks Great! looking forward to seeing the completed w/ paint scheme. Any pix from behind? I wonder what kind of tail light would look best with that tail section......if I were to use this body work for my "street" NSR. Last edited by Manimal; 03-25-2008 at 06:50 AM.

03-25-2008, 02:49 PM	#36 (permalink)
Indetrucks 3rd Gear Member Join Date: Dec 2004 Location: Lomita, CA (Torrance) Posts: 1,427	Re: New NSR bodywork from EBAY! Jason.. all I gotta say is: "Just don't paint it the same color as your 80?" In fact, go ahead and throw the British flag paint scheme on there for me.

03-25-2008, 05:06 PM	#37 (permalink)
miniman 3rd Gear Member Join Date: Jan 2005 Location: Corona, CA Posts: 1,130	Re: New NSR bodywork from EBAY! So! I take it you don't like my 150's paint scheme! Cool by me! Don't ask to ride it.....

03-26-2008, 10:56 AM	#39 (permalink)
Luckystar64 2nd Gear Member Join Date: Feb 2007 Location: Brunswick, Ohio Posts: 907	Re: New NSR bodywork from EBAY! That bodywork looks awesome now!!!! I like it way more than the NSF work too. I'd saw off the part on the tail that doesn't mesh with the subframe, then clean it up and shape it with a Dremel. I could see my boot catching that corner that sticks out on it and cracking it off. How hard was it to get on? ---L*64

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)