Planet Minis

s_10onbagz · 04-22-2008, 12:07 AM

when will the videos be up? not sure if you checked your mail, but payment is sent for the zb swing arm, bars, and bar clamps. if you want to throw in the headlight bracket for free it would be cool. ahahah. let me know if you get that stuff out today.

i just started her up for the first time, can't wait to break this motor in. im thinking about making a build thread like this for my bike. if i do i'll link you up.

Nooblette · 04-24-2008, 01:12 PM

I am holding my breath still!!!

My bike is coming along so slowly I want to see yours so I can get motivated some more... I was going to work on mine but my front main seal BLEW OUT of its spot in my car... So now I am riding the DR650 in the rain

First car, then Bike, Then eating and sleeping. In that order!!!

daddysmut · 04-24-2008, 01:25 PM

great build. you've got me drooling over here.

shawnbassett26 · 04-24-2008, 08:34 PM

Some more goodies today. Got a trail tech Vapor gauge. Very nice for the price. Everything works really well. Has a tach, speedo, temp, top speed, odometer, ect.... I like it!

supernes550 · 04-25-2008, 12:06 AM

which vapor kit did you get? how's the speedo and everything hook up to your bike?

s_10onbagz · 04-25-2008, 12:11 AM

thats my next buy right there. i wanted a cluster with a (cable) digital speedo and analog tach like the takegawa, but km/h wont do much good for my street riding so i am going with the vapor aswell. looks sick on your bike. did you put the magnets on the rotor or wheel? where did you put the temp sensor?

Nooblette · 04-25-2008, 12:04 PM

Sweeeeeeeeeeeet. Is the odometer just a trip gauge or does it hold lifetime mileage too?

shawnbassett26 · 04-25-2008, 12:06 PM

It runs off a speed sensor. I ran the magnet throught the rotor. The Vapors are all the same, (the computers.) I got one for a xr200. Its pretty accurate. Also has 2 shift lights. dose ALOT for the price! Im very happy with the buy. The Xr200 runs off the stator for power and thats how i power it. it comes with an internal bat as well. was a little work but well worth it. TRAILTECH.NET has all the specs and they have a few other computers aswell. But i would opp for the vapor (only one with tach).
~Shawn

shawnbassett26 · 04-25-2008, 12:06 PM

Holds all data, unless you reset it.

shw911 · 04-25-2008, 12:28 PM

nice brakes. which master cylinder are you using? How's the feel?

Nooblette · 04-25-2008, 12:40 PM

BTW what sprocket combo did you decide on?

s_10onbagz · 04-25-2008, 01:13 PM

ahaha this is like 20 questions. you would need a lighting coil to run a vapor on a 50 right?

1TrikZB · 04-25-2008, 04:34 PM

Looks good on there Shawn. I have a full dance card this weekend, but I maybe able to swing by late afternoon Saturday with the camera. I'll call you.

I'm still not riding it until you put a seat on it. This old fart needs some padding.

peace,
bobbyV

DEFBOY35 · 04-25-2008, 10:25 PM

hey shawn, i just wanted to say i have seen the build process over at ysr50.com as well and you bike is absolutely insane! cant wait to see it finished. i cant wait to start tearing into my bike and get some things done to it this next winter., seeing all this has given me alot of inspiration for sure!

shawnbassett26 · 04-26-2008, 06:20 AM

Im using a ZX10 (05) master, feels pretty good (not too over kill) could bleed the brakes 1 more time though.

Sporckets are 17t and 41t, works GREAT, tons of power all the time and the bike is still pulling at 80mph.

You dont have to have a lighting coil. it has an internal bat, but the back light wont stay on if it doesnt have a power source. The Vapor works GREAT so far!

Bobby V needs to help me do some video so you guys can see this beast in action!

Thanks for all the positive posts!
~Shawn

firepower354 · 04-26-2008, 06:23 AM

An old CB100 inner rotor setup should bolt right in, have a lighting coil, and might even have a little less rotating mass.

1TrikZB · 04-26-2008, 10:33 AM

AwwwYeeeeaaah man. I'll try to get over there late this afternoon.

peace,
bobbyV

Eviloompa · 04-26-2008, 11:23 AM

How far are you from being done with it....The Suspence is KILLIN Me!!!!!!
Can't wait to see the finished product!!!!!

shawnbassett26 · 04-26-2008, 01:09 PM

Belive you me, i want it done too, just got my sweet headlight! Just waiting on bodywork, install it (that will be a project in itself) make an upper stay, fiberglass a housing for the light and paint! Prob a few things hear and there i come accrose. stay tuned. hopefully i can get some video soon!

1TrikZB · 04-26-2008, 07:04 PM

Here the video we recorded this afternoon.

Shawn zipping by followed by Chris on his ZB. And no, Shawn doesn't have his seat installed.

Rolling on the Minis

Click the link below and goto post #95 to see a vid of Chris on the ZB.

MY ZB50 build.

peace,
bobbyV

04-22-2008, 12:07 AM	#141 (permalink)
s_10onbagz 2nd Gear Member Join Date: Sep 2007 Location: Connecticut. Posts: 500	Re: My YSR 200 4 Stroke build! when will the videos be up? not sure if you checked your mail, but payment is sent for the zb swing arm, bars, and bar clamps. if you want to throw in the headlight bracket for free it would be cool. ahahah. let me know if you get that stuff out today. i just started her up for the first time, can't wait to break this motor in. im thinking about making a build thread like this for my bike. if i do i'll link you up.

04-24-2008, 01:12 PM	#142 (permalink)
Nooblette 1st Gear Member Join Date: Apr 2008 Location: Fresno, Ca. Posts: 182	Re: My YSR 200 4 Stroke build! I am holding my breath still!!! My bike is coming along so slowly I want to see yours so I can get motivated some more... I was going to work on mine but my front main seal BLEW OUT of its spot in my car... So now I am riding the DR650 in the rain First car, then Bike, Then eating and sleeping. In that order!!!

04-24-2008, 01:25 PM	#143 (permalink)
daddysmut 3rd Gear Member Join Date: Dec 2004 Location: O-town florida Posts: 3,167	Re: My YSR 200 4 Stroke build! great build. you've got me drooling over here.

04-24-2008, 08:34 PM	#144 (permalink)
shawnbassett26 2nd Gear Member Join Date: Feb 2008 Location: Orlando FL Posts: 807	Re: My YSR 200 4 Stroke build! Some more goodies today. Got a trail tech Vapor gauge. Very nice for the price. Everything works really well. Has a tach, speedo, temp, top speed, odometer, ect.... I like it!

04-25-2008, 12:06 AM	#145 (permalink)
supernes550 The Golden Ticket Join Date: May 2006 Location: 5outh 5an 0iego Posts: 3,207	Re: My YSR 200 4 Stroke build! which vapor kit did you get? how's the speedo and everything hook up to your bike?

04-25-2008, 12:11 AM	#146 (permalink)
s_10onbagz 2nd Gear Member Join Date: Sep 2007 Location: Connecticut. Posts: 500	Re: My YSR 200 4 Stroke build! thats my next buy right there. i wanted a cluster with a (cable) digital speedo and analog tach like the takegawa, but km/h wont do much good for my street riding so i am going with the vapor aswell. looks sick on your bike. did you put the magnets on the rotor or wheel? where did you put the temp sensor?

04-25-2008, 12:04 PM	#147 (permalink)
Nooblette 1st Gear Member Join Date: Apr 2008 Location: Fresno, Ca. Posts: 182	Re: My YSR 200 4 Stroke build! Sweeeeeeeeeeeet. Is the odometer just a trip gauge or does it hold lifetime mileage too?

04-25-2008, 12:06 PM	#148 (permalink)
shawnbassett26 2nd Gear Member Join Date: Feb 2008 Location: Orlando FL Posts: 807	Re: My YSR 200 4 Stroke build! It runs off a speed sensor. I ran the magnet throught the rotor. The Vapors are all the same, (the computers.) I got one for a xr200. Its pretty accurate. Also has 2 shift lights. dose ALOT for the price! Im very happy with the buy. The Xr200 runs off the stator for power and thats how i power it. it comes with an internal bat as well. was a little work but well worth it. TRAILTECH.NET has all the specs and they have a few other computers aswell. But i would opp for the vapor (only one with tach). ~Shawn

04-25-2008, 12:06 PM	#149 (permalink)
shawnbassett26 2nd Gear Member Join Date: Feb 2008 Location: Orlando FL Posts: 807	Re: My YSR 200 4 Stroke build! Holds all data, unless you reset it.

04-25-2008, 12:28 PM	#150 (permalink)
shw911 "Eating Ramen" Join Date: Feb 2007 Location: Los Angeles, CA Posts: 1,658	Re: My YSR 200 4 Stroke build! nice brakes. which master cylinder are you using? How's the feel?

04-25-2008, 12:40 PM	#151 (permalink)
Nooblette 1st Gear Member Join Date: Apr 2008 Location: Fresno, Ca. Posts: 182	Re: My YSR 200 4 Stroke build! BTW what sprocket combo did you decide on?

04-25-2008, 01:13 PM	#152 (permalink)
s_10onbagz 2nd Gear Member Join Date: Sep 2007 Location: Connecticut. Posts: 500	Re: My YSR 200 4 Stroke build! ahaha this is like 20 questions. you would need a lighting coil to run a vapor on a 50 right?

04-25-2008, 04:34 PM	#153 (permalink)
1TrikZB 2nd Gear Member Join Date: Dec 2005 Location: JackSonville, Fl Posts: 861 Awards Showcase Total Awards: 1	Re: My YSR 200 4 Stroke build! Looks good on there Shawn. I have a full dance card this weekend, but I maybe able to swing by late afternoon Saturday with the camera. I'll call you. I'm still not riding it until you put a seat on it. This old fart needs some padding. peace, bobbyV

04-25-2008, 10:25 PM	#154 (permalink)
DEFBOY35 PM Newbie Join Date: Mar 2008 Posts: 9	Re: My YSR 200 4 Stroke build! hey shawn, i just wanted to say i have seen the build process over at ysr50.com as well and you bike is absolutely insane! cant wait to see it finished. i cant wait to start tearing into my bike and get some things done to it this next winter., seeing all this has given me alot of inspiration for sure!

04-26-2008, 06:20 AM	#155 (permalink)
shawnbassett26 2nd Gear Member Join Date: Feb 2008 Location: Orlando FL Posts: 807	Re: My YSR 200 4 Stroke build! Im using a ZX10 (05) master, feels pretty good (not too over kill) could bleed the brakes 1 more time though. Sporckets are 17t and 41t, works GREAT, tons of power all the time and the bike is still pulling at 80mph. You dont have to have a lighting coil. it has an internal bat, but the back light wont stay on if it doesnt have a power source. The Vapor works GREAT so far! Bobby V needs to help me do some video so you guys can see this beast in action! Thanks for all the positive posts! ~Shawn

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

04-26-2008, 06:23 AM	#156 (permalink)
firepower354 3rd Gear Member Join Date: Oct 2006 Location: Flint MI Posts: 6,743	Re: My YSR 200 4 Stroke build! An old CB100 inner rotor setup should bolt right in, have a lighting coil, and might even have a little less rotating mass.

04-26-2008, 10:33 AM	#157 (permalink)
1TrikZB 2nd Gear Member Join Date: Dec 2005 Location: JackSonville, Fl Posts: 861 Awards Showcase Total Awards: 1	Re: My YSR 200 4 Stroke build! AwwwYeeeeaaah man. I'll try to get over there late this afternoon. peace, bobbyV

04-26-2008, 11:23 AM	#158 (permalink)
Eviloompa 3rd Gear Member Join Date: Apr 2006 Location: Brookpark, Ohio Posts: 1,998	Re: My YSR 200 4 Stroke build! How far are you from being done with it....The Suspence is KILLIN Me!!!!!! Can't wait to see the finished product!!!!!

04-26-2008, 01:09 PM	#159 (permalink)
shawnbassett26 2nd Gear Member Join Date: Feb 2008 Location: Orlando FL Posts: 807	Re: My YSR 200 4 Stroke build! Belive you me, i want it done too, just got my sweet headlight! Just waiting on bodywork, install it (that will be a project in itself) make an upper stay, fiberglass a housing for the light and paint! Prob a few things hear and there i come accrose. stay tuned. hopefully i can get some video soon!

04-26-2008, 07:04 PM	#160 (permalink)
1TrikZB 2nd Gear Member Join Date: Dec 2005 Location: JackSonville, Fl Posts: 861 Awards Showcase Total Awards: 1	Finally a Quick Video Here the video we recorded this afternoon. Shawn zipping by followed by Chris on his ZB. And no, Shawn doesn't have his seat installed. Rolling on the Minis Click the link below and goto post #95 to see a vid of Chris on the ZB. MY ZB50 build. peace, bobbyV Last edited by 1TrikZB; 04-26-2008 at 07:12 PM. Reason: added link to Chris's video