Planet Minis

shawnbassett26 · 04-08-2008, 09:40 PM

Well im about 99% sure its a 5 speed (ya ya i know i should know) but the motor is at my work getting some work done.... any ways there are 3 xr200 motors that i know of. 84+ish (XR200/XR200R) 2 valve, no bat. 85&86 XR200r was a freak (crap motor. STAY AWAY) 4 valve dual carb/exhaust, no bat. XL200 was the on/off road with a bat, electric start, 2 valve, and lights. there were years that the xr200 did and didnt come with lights. Some of the newer XR200 came with electric also.

PS not to confuse any one but my motor is a 2 valve 86, they made the 4 valve in the same year also (was the race bike). The 4 valve is a crappy motor. carbs are extreamly hard to sink and parts are hard to come by. Oh and the power is the same.
~Shawn

shawnbassett26 · 04-08-2008, 09:53 PM

Small update, wanted to do more but i had to help chriswilder wire his bike tonight, and we got it done. Thaks 1Trickzb with the wiring diagram (big HELP!).

Anyways, completly rebuilt and painted my brakes (the front again i thought it looked like crap) I built my lines. Goodridge lines and fittings. Would have mounted the rear brake but chris stole my spacer......

poopy....

Hope fully ill have more soon, just been busy and well.... broke....

cdiaz3 · 04-08-2008, 10:20 PM

Quote:

Originally Posted by shawnbassett26

Well im about 99% sure its a 5 speed (ya ya i know i should know) but the motor is at my work getting some work done.... any ways there are 3 xr200 motors that i know of. 84+ish (XR200/XR200R) 2 valve, no bat. 85&86 XR200r was a freak (crap motor. STAY AWAY) 4 valve dual carb/exhaust, no bat. XL200 was the on/off road with a bat, electric start, 2 valve, and lights. there were years that the xr200 did and didnt come with lights. Some of the newer XR200 came with electric also.

PS not to confuse any one but my motor is a 2 valve 86, they made the 4 valve in the same year also (was the race bike). The 4 valve is a crappy motor. carbs are extreamly hard to sink and parts are hard to come by. Oh and the power is the same.
~Shawn

Geez! Talk about variations within one model!! I think I'm gonna tell my bud to go for the crf230f motor instead, I think those are all the same right?

Anyway...
Let me know how much more braking power you end up with when you finish the front brakes. You are using the ZX10 master with the YSR caliper and the NSR disk right? I want to install a better master too, but I wanna wait to see if it will make a worthwhile difference.

shawnbassett26 · 04-08-2008, 10:25 PM

yes im use'n the brake setup that you listed. A 230 swap would be awsome. I just went with the 200 because i work with a guy who gave me a whole XR200 for $250 Was kinda worried about the zx10 master being too much, but blead chriswilders brake (kinda the same set up) and there pretty nice.
~Shawn

yzr80 · 04-09-2008, 09:51 AM

Shawn, before you go cutting a set of forks apart to do the nsr conversion I'll try to get you some more detailed pics of how mine was done. I had it out for the first ride of the year the other day.

shawnbassett26 · 04-10-2008, 07:01 AM

YZR80, more pics of your tripples wpild be great!
~Shawn

shawnbassett26 · 04-18-2008, 09:57 PM

It Runs!!!!!!!!!!!!!!!

shawnbassett26 · 04-18-2008, 10:02 PM

Its is no lie scary fast! Was a good day. got my motor back from a guy who builds the sh*t out of mini honda motors. Was told he wouldnt be done till next week, nice to have it back today. Im so exciteted, its like big bike fast. Me and chriswilder rode it arround (about 1 mile) Very capable of 100mph! More details and pics tomorrow! Thanks chris to pushing me to get it started tonight!

chriswilder · 04-18-2008, 10:09 PM

no problem homie!! that thing is nuts for all of you people building minis thats the way to go i thought my bike was sick untill i got a chance to take this for a spin i need another zb to do this swap in it wheelies amazingly it pulls crazy hard and the gears are a great lengthi think tomorrow i might have to pull the gsxr1000 out of the garage and let shawn make some top end pulls to see what kind of top end speed it gets. great build shawn !!!

shawnbassett26 · 04-18-2008, 10:11 PM

sounds good to me!

shawnbassett26 · 04-20-2008, 08:34 PM

Well took a few pics tonight. Just waiting on my bodywork.

This is my handle bar set up. Just installed my 1000rr on/off switch and works great.

Front brake set up. Still useing the YSR caliper. (wont be there for long def will cange to a NSR forks and brembo mono block. Works fine but just not bling'E.

The rears all done. I used ZB50 frame plugs on eather side. Works great and looks alot better.

shawnbassett26 · 04-20-2008, 08:37 PM

Pic of finishing my exhaust! sounds GREAT!

shawnbassett26 · 04-20-2008, 08:46 PM

Left side.

Right side.

Well i went for a MPH test tonight.
Its REALLY FAST! All the info i read said it was a 5 speed. Guess i was worng. Its a six speed! OH man! Chris fowelled on the GSXR to see how fast i could get too. I ran out of room and in 5th i got to 75MPH. I still have 1 more gear and was still pulling! Thing is a blast and runs really strong! When bobby V comes over again ill get some video and hopefully ill have seat for ya.

Pal · 04-20-2008, 08:54 PM

wow 75mph in 5th!!! thats surprisingly fast

shawnbassett26 · 04-20-2008, 08:56 PM

That's what i was thinking! It got there REALLY quick!

Nooblette · 04-21-2008, 10:00 AM

DUDE!!!! That is one sweet build! I hope you are ging to give us a few youtube videos or one really well done video. It would be a shame if you spent all this time building a sweet bike and you film it with a cell phone...

Thanks in advance!!!

slammedGTI16v · 04-21-2008, 10:28 AM

thats awesome, nice build

shawnbassett26 · 04-21-2008, 11:57 AM

Funny thing, every picture is with a cell phone! no to bad... and any ways thats why im waiting to put a video up. I want to look nice. Im working on it......

Thanks for the positive comments!

~Shawn

Nooblette · 04-21-2008, 12:05 PM

I noticed the white wash out from the small lens commonly found on cell phones.

I produce videos, and do photography for a living but even I am guilty of using my cell camera... Just don't tell anyone.

And now for my rant...
The size of lens on those cameras make it impossible for a decent picture to be taken over 1.3 megapixels. the ones that advertise 2.0 Mp will suffer from more motion blur and wash out while still taking up more space on your phone, AND it will look crappier. So you pay MORE MONEY for a WORSE picture... Some of the better phones are getting bigger lenses though and are ok...ish...er

....BTW Did you go that fast without a seat???

shawnbassett26 · 04-21-2008, 12:22 PM

when it all said and done my buddy will do a photo shoot for me!
And yes no seat! Was fun!

04-08-2008, 09:40 PM	#121 (permalink)
shawnbassett26 2nd Gear Member Join Date: Feb 2008 Location: Orlando FL Posts: 807	Re: My YSR 200 4 Stroke build! Well im about 99% sure its a 5 speed (ya ya i know i should know) but the motor is at my work getting some work done.... any ways there are 3 xr200 motors that i know of. 84+ish (XR200/XR200R) 2 valve, no bat. 85&86 XR200r was a freak (crap motor. STAY AWAY) 4 valve dual carb/exhaust, no bat. XL200 was the on/off road with a bat, electric start, 2 valve, and lights. there were years that the xr200 did and didnt come with lights. Some of the newer XR200 came with electric also. PS not to confuse any one but my motor is a 2 valve 86, they made the 4 valve in the same year also (was the race bike). The 4 valve is a crappy motor. carbs are extreamly hard to sink and parts are hard to come by. Oh and the power is the same. ~Shawn Last edited by shawnbassett26; 04-08-2008 at 09:43 PM.

04-08-2008, 09:53 PM	#122 (permalink)
shawnbassett26 2nd Gear Member Join Date: Feb 2008 Location: Orlando FL Posts: 807	Re: My YSR 200 4 Stroke build! Small update, wanted to do more but i had to help chriswilder wire his bike tonight, and we got it done. Thaks 1Trickzb with the wiring diagram (big HELP!). Anyways, completly rebuilt and painted my brakes (the front again i thought it looked like crap) I built my lines. Goodridge lines and fittings. Would have mounted the rear brake but chris stole my spacer...... poopy.... Hope fully ill have more soon, just been busy and well.... broke....

04-08-2008, 10:25 PM	#124 (permalink)
shawnbassett26 2nd Gear Member Join Date: Feb 2008 Location: Orlando FL Posts: 807	Re: My YSR 200 4 Stroke build! yes im use'n the brake setup that you listed. A 230 swap would be awsome. I just went with the 200 because i work with a guy who gave me a whole XR200 for $250 Was kinda worried about the zx10 master being too much, but blead chriswilders brake (kinda the same set up) and there pretty nice. ~Shawn

04-09-2008, 09:51 AM	#125 (permalink)
yzr80 PM Newbie Join Date: Mar 2008 Posts: 10	Re: My YSR 200 4 Stroke build! Shawn, before you go cutting a set of forks apart to do the nsr conversion I'll try to get you some more detailed pics of how mine was done. I had it out for the first ride of the year the other day.

04-10-2008, 07:01 AM	#126 (permalink)
shawnbassett26 2nd Gear Member Join Date: Feb 2008 Location: Orlando FL Posts: 807	Re: My YSR 200 4 Stroke build! YZR80, more pics of your tripples wpild be great! ~Shawn

04-18-2008, 09:57 PM	#127 (permalink)
shawnbassett26 2nd Gear Member Join Date: Feb 2008 Location: Orlando FL Posts: 807	Re: My YSR 200 4 Stroke build! It Runs!!!!!!!!!!!!!!!

04-18-2008, 10:02 PM	#128 (permalink)
shawnbassett26 2nd Gear Member Join Date: Feb 2008 Location: Orlando FL Posts: 807	Re: My YSR 200 4 Stroke build! Its is no lie scary fast! Was a good day. got my motor back from a guy who builds the sh*t out of mini honda motors. Was told he wouldnt be done till next week, nice to have it back today. Im so exciteted, its like big bike fast. Me and chriswilder rode it arround (about 1 mile) Very capable of 100mph! More details and pics tomorrow! Thanks chris to pushing me to get it started tonight!

04-18-2008, 10:09 PM	#129 (permalink)
chriswilder 1st Gear Member Join Date: Feb 2008 Location: jacksonville fl. Posts: 110	Re: My YSR 200 4 Stroke build! no problem homie!! that thing is nuts for all of you people building minis thats the way to go i thought my bike was sick untill i got a chance to take this for a spin i need another zb to do this swap in it wheelies amazingly it pulls crazy hard and the gears are a great lengthi think tomorrow i might have to pull the gsxr1000 out of the garage and let shawn make some top end pulls to see what kind of top end speed it gets. great build shawn !!!

04-18-2008, 10:11 PM	#130 (permalink)
shawnbassett26 2nd Gear Member Join Date: Feb 2008 Location: Orlando FL Posts: 807	Re: My YSR 200 4 Stroke build! sounds good to me!

04-20-2008, 08:34 PM	#131 (permalink)
shawnbassett26 2nd Gear Member Join Date: Feb 2008 Location: Orlando FL Posts: 807	Re: My YSR 200 4 Stroke build! Well took a few pics tonight. Just waiting on my bodywork. This is my handle bar set up. Just installed my 1000rr on/off switch and works great. Front brake set up. Still useing the YSR caliper. (wont be there for long def will cange to a NSR forks and brembo mono block. Works fine but just not bling'E. The rears all done. I used ZB50 frame plugs on eather side. Works great and looks alot better. Last edited by shawnbassett26; 04-20-2008 at 08:49 PM.

04-20-2008, 08:37 PM	#132 (permalink)
shawnbassett26 2nd Gear Member Join Date: Feb 2008 Location: Orlando FL Posts: 807	Re: My YSR 200 4 Stroke build! Pic of finishing my exhaust! sounds GREAT!

04-20-2008, 08:46 PM	#133 (permalink)
shawnbassett26 2nd Gear Member Join Date: Feb 2008 Location: Orlando FL Posts: 807	Re: My YSR 200 4 Stroke build! Left side. Right side. Well i went for a MPH test tonight. Its REALLY FAST! All the info i read said it was a 5 speed. Guess i was worng. Its a six speed! OH man! Chris fowelled on the GSXR to see how fast i could get too. I ran out of room and in 5th i got to 75MPH. I still have 1 more gear and was still pulling! Thing is a blast and runs really strong! When bobby V comes over again ill get some video and hopefully ill have seat for ya.

04-20-2008, 08:54 PM	#134 (permalink)
Pal 3rd Gear Member Join Date: Mar 2007 Location: Highland Park, IL Posts: 1,228	Re: My YSR 200 4 Stroke build! wow 75mph in 5th!!! thats surprisingly fast

04-20-2008, 08:56 PM	#135 (permalink)
shawnbassett26 2nd Gear Member Join Date: Feb 2008 Location: Orlando FL Posts: 807	Re: My YSR 200 4 Stroke build! That's what i was thinking! It got there REALLY quick!

04-21-2008, 10:00 AM	#136 (permalink)
Nooblette 1st Gear Member Join Date: Apr 2008 Location: Fresno, Ca. Posts: 182	Re: My YSR 200 4 Stroke build! DUDE!!!! That is one sweet build! I hope you are ging to give us a few youtube videos or one really well done video. It would be a shame if you spent all this time building a sweet bike and you film it with a cell phone... Thanks in advance!!!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

04-21-2008, 10:28 AM	#137 (permalink)
slammedGTI16v PM Newbie Join Date: Feb 2008 Location: New Hampshire Posts: 60	Re: My YSR 200 4 Stroke build! thats awesome, nice build

04-21-2008, 11:57 AM	#138 (permalink)
shawnbassett26 2nd Gear Member Join Date: Feb 2008 Location: Orlando FL Posts: 807	Re: My YSR 200 4 Stroke build! Funny thing, every picture is with a cell phone! no to bad... and any ways thats why im waiting to put a video up. I want to look nice. Im working on it...... Thanks for the positive comments! ~Shawn

04-21-2008, 12:05 PM	#139 (permalink)
Nooblette 1st Gear Member Join Date: Apr 2008 Location: Fresno, Ca. Posts: 182	Re: My YSR 200 4 Stroke build! I noticed the white wash out from the small lens commonly found on cell phones. I produce videos, and do photography for a living but even I am guilty of using my cell camera... Just don't tell anyone. And now for my rant... The size of lens on those cameras make it impossible for a decent picture to be taken over 1.3 megapixels. the ones that advertise 2.0 Mp will suffer from more motion blur and wash out while still taking up more space on your phone, AND it will look crappier. So you pay MORE MONEY for a WORSE picture... Some of the better phones are getting bigger lenses though and are ok...ish...er ....BTW Did you go that fast without a seat???

04-21-2008, 12:22 PM	#140 (permalink)
shawnbassett26 2nd Gear Member Join Date: Feb 2008 Location: Orlando FL Posts: 807	Re: My YSR 200 4 Stroke build! when it all said and done my buddy will do a photo shoot for me! And yes no seat! Was fun!