Planet Minis

shawnbassett26 · 02-24-2008, 06:55 PM

MiniMoto004 · 02-25-2008, 06:18 PM

sweet **** thats for sure. i wanna see the finished project. im thinking about starting a build on a ysr or something similar.

shawnbassett26 · 03-03-2008, 02:42 PM

MINI UPDATE!
These are my hand controles. JDM clipons. Welded=(JDM), instead of cast=(US) and powder coated black. Brembo ZX10 master and clutch pertch. Cut down levers for now. Going to buy Vortex short levers soon. New renthal grips and new throttle tube.

shawnbassett26 · 03-03-2008, 02:50 PM

Painted the wheels! Keep an open mind. I asure you when its all said and done they will look great with how i paint it! Not sure how i feel about my sproket. Seems most people with bigger motors in YSRs use a 16/41 sprockets (thats what im runnung). Might go smaller. Going to see how it works when im done. I should* run about 75-85 MPH. Hopefully! Waiting on powder coating!!! AAHHHHH!!

Red with black stripe!

Black with red stripe!

Stay tuned!

Bri6672 · 03-05-2008, 01:09 PM

You are definitly going to want to run 16-41 or 15-41, I run 16-43 on my Xr100 motor and that works great but with your 200 you are going to want to run taller, like 16-41

shawnbassett26 · 03-05-2008, 02:48 PM

Im running a 16/41 now. I really want to run a 14/36 420 Chain, same ratio but less sprocket. Sprocket specialists cant make a 420 front sprocket..... oh well... will run it for a while and see if i get the MPH i want.

MISFITSBOB · 03-06-2008, 01:24 AM

Quote:

Originally Posted by shawnbassett26

Painted the wheels! Keep an open mind. I asure you when its all said and done they will look great with how i paint it! Not sure how i feel about my sproket. Seems most people with bigger motors in YSRs use a 16/41 sprockets (thats what im runnung). Might go smaller. Going to see how it works when im done. I should* run about 75-85 MPH. Hopefully! Waiting on powder coating!!! AAHHHHH!!

Red with black stripe!

Black with red stripe!

Stay tuned!

a friend of mine painted his wheels on his old 600 f4i the same way you did your front wheel.....build looks awesome, i cant wait to see the end result.

Dan_Lorenze · 03-06-2008, 02:23 AM

Awesome build... Keep us posted.

shawnbassett26 · 03-06-2008, 06:40 AM

Thanks for the positive posts. Hope full ill get my fork legs/ tripples/ frame/ swingarm/ kick starter/ kick stand/ ect.... from my powder coater to day!!! I want to start to put this thing togeter!!!!

missingpieces · 03-11-2008, 10:30 AM

shawn, where are you in Jax and where are you riding that? is south campus open again?

shawnbassett26 · 03-11-2008, 07:39 PM

I live at monument, 9A ish... Dont really ride the minis yet but close (chriswilder) lives arround the corrner. We will be on the streets of JAX VERY soon. getting close. We ride big bikes mainly. What do you ride? There are a FEW minis here.

missingpieces · 03-11-2008, 07:57 PM

Quote:

Originally Posted by shawnbassett26

I live at monument, 9A ish... Dont really ride the minis yet but close (chriswilder) lives arround the corrner. We will be on the streets of JAX VERY soon. getting close. We ride big bikes mainly. What do you ride? There are a FEW minis here.

my mini group of friends..we all used to ride out around sportmans club and all that stunting big bikes, but now we hit up backyard tracks, hillard and hard rock on the KLXs

im in avondale

shawnbassett26 · 03-12-2008, 07:16 PM

UPDATE!!!! Thank god i got my parts from powder coating. I got my fork legs/ tripples/ kick stand, kick start, case covers/cid cover/ gear shifter (with Vortex toe peg!)/ Frame/swingarm (flat black).

shawnbassett26 · 03-12-2008, 07:17 PM

Frame and swingarm (flat) Look close but thats a NSR shock. I made all new mounst for the shock.

shawnbassett26 · 03-12-2008, 07:18 PM

Freshly painted gas tank!

shawnbassett26 · 03-12-2008, 07:18 PM

Brand new Vortex gas cap!

firepower354 · 03-12-2008, 07:18 PM

Stealth Bomber

shawnbassett26 · 03-12-2008, 07:23 PM

This was a RARE find. My old roomate had a Devil dual shotgun exhaust on his 03R6 and i thought that one muffler would be awsome to have and be the right size, Iv been looking for months, i just so happened to find this guy on ebay. The inlet is perfect size! I will be running an undertail exhaust. I will be making the exhaust this or next weekend.

shawnbassett26 · 03-12-2008, 07:30 PM

I hate to even show this picture.... was getting late and my phone sucks taking pics at night. but heres one anyways. ill take better ones tomorrow. Just a little something to hold you over!

ROBINSONDB22 · 03-12-2008, 07:47 PM

Quote:

Originally Posted by shawnbassett26

Frame and swingarm (flat)

now i see where BBR got their inspiration!

awsome build! i love the rims!

02-24-2008, 06:55 PM	#41 (permalink)
shawnbassett26 2nd Gear Member Join Date: Feb 2008 Location: Jacksonville FL Posts: 492	Re: My YSR 200 4 Stroke build! firepower354 , PM sent. Last edited by shawnbassett26; 02-24-2008 at 07:32 PM.

02-25-2008, 06:18 PM	#42 (permalink)
MiniMoto004 1st Gear Member Join Date: Jan 2008 Location: Michigan Posts: 145	Re: My YSR 200 4 Stroke build! sweet **** thats for sure. i wanna see the finished project. im thinking about starting a build on a ysr or something similar.

03-03-2008, 02:42 PM	#43 (permalink)
shawnbassett26 2nd Gear Member Join Date: Feb 2008 Location: Jacksonville FL Posts: 492	Re: My YSR 200 4 Stroke build! MINI UPDATE! These are my hand controles. JDM clipons. Welded=(JDM), instead of cast=(US) and powder coated black. Brembo ZX10 master and clutch pertch. Cut down levers for now. Going to buy Vortex short levers soon. New renthal grips and new throttle tube. Last edited by shawnbassett26; 03-03-2008 at 02:54 PM.

03-03-2008, 02:50 PM	#44 (permalink)
shawnbassett26 2nd Gear Member Join Date: Feb 2008 Location: Jacksonville FL Posts: 492	Re: My YSR 200 4 Stroke build! Painted the wheels! Keep an open mind. I asure you when its all said and done they will look great with how i paint it! Not sure how i feel about my sproket. Seems most people with bigger motors in YSRs use a 16/41 sprockets (thats what im runnung). Might go smaller. Going to see how it works when im done. I should* run about 75-85 MPH. Hopefully! Waiting on powder coating!!! AAHHHHH!! Red with black stripe! Black with red stripe! Stay tuned! Last edited by shawnbassett26; 03-03-2008 at 02:56 PM.

03-05-2008, 01:09 PM	#45 (permalink)
Bri6672 PM Newbie Join Date: Dec 2007 Location: San Diego, CA Posts: 56	Re: My YSR 200 4 Stroke build! You are definitly going to want to run 16-41 or 15-41, I run 16-43 on my Xr100 motor and that works great but with your 200 you are going to want to run taller, like 16-41

03-05-2008, 02:48 PM	#46 (permalink)
shawnbassett26 2nd Gear Member Join Date: Feb 2008 Location: Jacksonville FL Posts: 492	Re: My YSR 200 4 Stroke build! Im running a 16/41 now. I really want to run a 14/36 420 Chain, same ratio but less sprocket. Sprocket specialists cant make a 420 front sprocket..... oh well... will run it for a while and see if i get the MPH i want.

03-06-2008, 02:23 AM	#48 (permalink)
Dan_Lorenze 2nd Gear Member Join Date: Mar 2006 Location: Moorpark CA Posts: 269	Re: My YSR 200 4 Stroke build! Awesome build... Keep us posted.

03-06-2008, 06:40 AM	#49 (permalink)
shawnbassett26 2nd Gear Member Join Date: Feb 2008 Location: Jacksonville FL Posts: 492	Re: My YSR 200 4 Stroke build! Thanks for the positive posts. Hope full ill get my fork legs/ tripples/ frame/ swingarm/ kick starter/ kick stand/ ect.... from my powder coater to day!!! I want to start to put this thing togeter!!!!

03-11-2008, 10:30 AM	#50 (permalink)
missingpieces PM Newbie Join Date: Jun 2006 Location: Jacksonville, FL Posts: 65	Re: My YSR 200 4 Stroke build! shawn, where are you in Jax and where are you riding that? is south campus open again?

03-11-2008, 07:39 PM	#51 (permalink)
shawnbassett26 2nd Gear Member Join Date: Feb 2008 Location: Jacksonville FL Posts: 492	Re: My YSR 200 4 Stroke build! I live at monument, 9A ish... Dont really ride the minis yet but close (chriswilder) lives arround the corrner. We will be on the streets of JAX VERY soon. getting close. We ride big bikes mainly. What do you ride? There are a FEW minis here.

03-12-2008, 07:16 PM	#53 (permalink)
shawnbassett26 2nd Gear Member Join Date: Feb 2008 Location: Jacksonville FL Posts: 492	Re: My YSR 200 4 Stroke build! UPDATE!!!! Thank god i got my parts from powder coating. I got my fork legs/ tripples/ kick stand, kick start, case covers/cid cover/ gear shifter (with Vortex toe peg!)/ Frame/swingarm (flat black).

03-12-2008, 07:17 PM	#54 (permalink)
shawnbassett26 2nd Gear Member Join Date: Feb 2008 Location: Jacksonville FL Posts: 492	Re: My YSR 200 4 Stroke build! Frame and swingarm (flat) Look close but thats a NSR shock. I made all new mounst for the shock. Last edited by shawnbassett26; 03-12-2008 at 08:08 PM.

03-12-2008, 07:18 PM	#55 (permalink)
shawnbassett26 2nd Gear Member Join Date: Feb 2008 Location: Jacksonville FL Posts: 492	Re: My YSR 200 4 Stroke build! Freshly painted gas tank!

03-12-2008, 07:18 PM	#56 (permalink)
shawnbassett26 2nd Gear Member Join Date: Feb 2008 Location: Jacksonville FL Posts: 492	Re: My YSR 200 4 Stroke build! Brand new Vortex gas cap!

03-12-2008, 07:18 PM	#57 (permalink)
firepower354 3rd Gear Member Join Date: Oct 2006 Location: Flint MI Posts: 5,118	Re: My YSR 200 4 Stroke build! Stealth Bomber

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

03-12-2008, 07:23 PM	#58 (permalink)
shawnbassett26 2nd Gear Member Join Date: Feb 2008 Location: Jacksonville FL Posts: 492	Re: My YSR 200 4 Stroke build! This was a RARE find. My old roomate had a Devil dual shotgun exhaust on his 03R6 and i thought that one muffler would be awsome to have and be the right size, Iv been looking for months, i just so happened to find this guy on ebay. The inlet is perfect size! I will be running an undertail exhaust. I will be making the exhaust this or next weekend. Last edited by shawnbassett26; 03-12-2008 at 07:28 PM.

03-12-2008, 07:30 PM	#59 (permalink)
shawnbassett26 2nd Gear Member Join Date: Feb 2008 Location: Jacksonville FL Posts: 492	Re: My YSR 200 4 Stroke build! I hate to even show this picture.... was getting late and my phone sucks taking pics at night. but heres one anyways. ill take better ones tomorrow. Just a little something to hold you over!