Planet Minis

randomguy310 · 02-20-2008, 08:52 PM

what was in involved in the electrolisis, like settings and such, thanks

firepower354 · 02-20-2008, 09:03 PM

Cool bike! I like the thumper swap. Blasters are too common

I wanna do one with an RD125 twin, just to hear a pair of chambers singing.

randomguy310 · 02-20-2008, 09:10 PM

i want to do a rd 125 also, i have a rd 100 engine, aka LS2 100 cc twin, if anyone is interested.

zracer7 · 02-20-2008, 09:31 PM

Awsome build, cant wait to see the finished product! I dont know if you have KREEMed the tank yet, but that stuff is absolute garbage, I think POR-15 has a much better product. Just my opinion.

shawnbassett26 · 02-20-2008, 09:37 PM

heres the site where i found out about and the (how too) on eletrosis. http://www.650rider.com/Content/pid=6.html

I was considering a few diffrent swaps. Blaster, yz85/80, 250f ect...
Was looking for 1. 12volt 2. Desent power 3. something diffrent (not claiming to be the first) 4. a motor with an aftermarket. Iv got $150 into the motor/swap/rebuild. So far i think im doing well. Went from 5hp(if i was lucky) to 20(ish).

Im working on NSR 3 spokes/swingarm/brakes. Just need my buddy to get his NSF 6 spokes for is zb50.
Stay tuned!

shawnbassett26 · 02-20-2008, 09:39 PM

No i havent done it yet, I work for H-D (not into harleys but im there for the money) and we used some Wurth brand tank sealer the other day it ist awsome. I think im going that route.

radtad767 · 02-21-2008, 04:45 PM

man thats a cool looking bike, good job so far. Really impressive!!

randomguy310 · 02-21-2008, 06:07 PM

thanks for the info on the electrolisis.

shawnbassett26 · 02-21-2008, 08:15 PM

Thanks for the positive posts. ill have some new updates this weekend. I VERY close to having NSR 3 spokes and swingarm!!! im Very excited! You wouldnt beleave how close they are to fitting!

moto-X-dude · 02-21-2008, 08:27 PM

that looks like its going to be sick when its done

Bri6672 · 02-21-2008, 11:07 PM

Nice Job!!! I love the cradle mount for easy access to work on the motor! Cant wait to see the finished product!

shawnbassett26 · 02-23-2008, 06:21 PM

I FINALLY GOT A SET OF NSR WHEELS AND SWINGARM!!! My buddy ordered NSF100 wheels from honda and might get a g-craft swingarm for his ZB, so i got his NSR parts. Going to sand blast my parts tomorrow and powder coat this week. Pics Soon!

Pierce · 02-23-2008, 06:26 PM

Did he get the wheels? I didn't know they were available from Honda anymore.....

shawnbassett26 · 02-23-2008, 06:35 PM

Well, its a VERY long story. Heres the short, He called Honda USA and apparently they were only going to import 2 sets of NSF wheels. The front was back ordered till march and the rear is back ordered till may. When he called honda said that one set was spoken for and the other set were available. So he scooped them up! Work out great for me and him. He didnt really want the 3 spokers.

supernes550 · 02-23-2008, 11:15 PM

what he pay for the wheels? did they come with bearings and the other parts?

shawnbassett26 · 02-24-2008, 06:53 AM

They come with bearings, hes going to order waves front and rear. Dosent come with spacers.

shawnbassett26 · 02-24-2008, 06:10 PM

A few new pics. Sorry if the pics are not that great, took my my phone.

3 spokes. Going to sand blast them and take them to the powder coater this week.

shawnbassett26 · 02-24-2008, 06:14 PM

Swingarm. I had to drill out the stock frame mount because the nsr it took a slightly larger bolt. Im going to order a rear brake asy when i get back to work on tuesday. I have new bearings/spacers/adjusters also.

shawnbassett26 · 02-24-2008, 06:19 PM

Im still going to use the YSR forks, i tried to use NSR forks tripple. It just wasnt going to work. So im going to get a NSR front brake/bracket and make and adapter. Im going to order a NSF100 rotor on tuesday as well. I had to drill out the legs because the NSR has a lorger axle. Worked out really well.

firepower354 · 02-24-2008, 06:40 PM

Interested in selling the stock YSR wheels??? To a fellow PM member? For a smokin' deal???

02-20-2008, 08:52 PM	#21 (permalink)
randomguy310 PM Newbie Join Date: Feb 2008 Posts: 31	Re: My YSR 200 4 Stroke build! what was in involved in the electrolisis, like settings and such, thanks

02-20-2008, 09:03 PM	#22 (permalink)
firepower354 3rd Gear Member Join Date: Oct 2006 Location: Flint MI Posts: 5,613	Re: My YSR 200 4 Stroke build! Cool bike! I like the thumper swap. Blasters are too common I wanna do one with an RD125 twin, just to hear a pair of chambers singing.

02-20-2008, 09:10 PM	#23 (permalink)
randomguy310 PM Newbie Join Date: Feb 2008 Posts: 31	Re: My YSR 200 4 Stroke build! i want to do a rd 125 also, i have a rd 100 engine, aka LS2 100 cc twin, if anyone is interested.

02-20-2008, 09:31 PM	#24 (permalink)
zracer7 PM Newbie Join Date: Jun 2006 Posts: 7	Re: My YSR 200 4 Stroke build! Awsome build, cant wait to see the finished product! I dont know if you have KREEMed the tank yet, but that stuff is absolute garbage, I think POR-15 has a much better product. Just my opinion.

02-20-2008, 09:37 PM	#25 (permalink)
shawnbassett26 2nd Gear Member Join Date: Feb 2008 Location: Orlando FL Posts: 569	Re: My YSR 200 4 Stroke build! heres the site where i found out about and the (how too) on eletrosis. http://www.650rider.com/Content/pid=6.html I was considering a few diffrent swaps. Blaster, yz85/80, 250f ect... Was looking for 1. 12volt 2. Desent power 3. something diffrent (not claiming to be the first) 4. a motor with an aftermarket. Iv got $150 into the motor/swap/rebuild. So far i think im doing well. Went from 5hp(if i was lucky) to 20(ish). Im working on NSR 3 spokes/swingarm/brakes. Just need my buddy to get his NSF 6 spokes for is zb50. Stay tuned!

02-20-2008, 09:39 PM	#26 (permalink)
shawnbassett26 2nd Gear Member Join Date: Feb 2008 Location: Orlando FL Posts: 569	Re: My YSR 200 4 Stroke build! No i havent done it yet, I work for H-D (not into harleys but im there for the money) and we used some Wurth brand tank sealer the other day it ist awsome. I think im going that route. Last edited by shawnbassett26; 02-20-2008 at 09:49 PM.

02-21-2008, 04:45 PM	#27 (permalink)
radtad767 2nd Gear Member Join Date: Jan 2008 Location: north carolina Posts: 274	Re: My YSR 200 4 Stroke build! man thats a cool looking bike, good job so far. Really impressive!!

02-21-2008, 06:07 PM	#28 (permalink)
randomguy310 PM Newbie Join Date: Feb 2008 Posts: 31	Re: My YSR 200 4 Stroke build! thanks for the info on the electrolisis.

02-21-2008, 08:15 PM	#29 (permalink)
shawnbassett26 2nd Gear Member Join Date: Feb 2008 Location: Orlando FL Posts: 569	Re: My YSR 200 4 Stroke build! Thanks for the positive posts. ill have some new updates this weekend. I VERY close to having NSR 3 spokes and swingarm!!! im Very excited! You wouldnt beleave how close they are to fitting!

02-21-2008, 08:27 PM	#30 (permalink)
moto-X-dude PM Newbie Join Date: Feb 2008 Location: california Posts: 18	Re: My YSR 200 4 Stroke build! that looks like its going to be sick when its done

02-21-2008, 11:07 PM	#31 (permalink)
Bri6672 PM Newbie Join Date: Dec 2007 Location: San Diego, CA Posts: 56	Re: My YSR 200 4 Stroke build! Nice Job!!! I love the cradle mount for easy access to work on the motor! Cant wait to see the finished product!

02-23-2008, 06:21 PM	#32 (permalink)
shawnbassett26 2nd Gear Member Join Date: Feb 2008 Location: Orlando FL Posts: 569	Re: My YSR 200 4 Stroke build! I FINALLY GOT A SET OF NSR WHEELS AND SWINGARM!!! My buddy ordered NSF100 wheels from honda and might get a g-craft swingarm for his ZB, so i got his NSR parts. Going to sand blast my parts tomorrow and powder coat this week. Pics Soon!

02-23-2008, 06:26 PM	#33 (permalink)
Pierce 2nd Gear Member Join Date: Feb 2006 Location: Evanston Il Posts: 568	Re: My YSR 200 4 Stroke build! Did he get the wheels? I didn't know they were available from Honda anymore.....

02-23-2008, 06:35 PM	#34 (permalink)
shawnbassett26 2nd Gear Member Join Date: Feb 2008 Location: Orlando FL Posts: 569	Re: My YSR 200 4 Stroke build! Well, its a VERY long story. Heres the short, He called Honda USA and apparently they were only going to import 2 sets of NSF wheels. The front was back ordered till march and the rear is back ordered till may. When he called honda said that one set was spoken for and the other set were available. So he scooped them up! Work out great for me and him. He didnt really want the 3 spokers.

02-23-2008, 11:15 PM	#35 (permalink)
supernes550 The Golden Ticket Join Date: May 2006 Location: 5outh 5an 0iego Posts: 2,993	Re: My YSR 200 4 Stroke build! what he pay for the wheels? did they come with bearings and the other parts?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

02-24-2008, 06:53 AM	#36 (permalink)
shawnbassett26 2nd Gear Member Join Date: Feb 2008 Location: Orlando FL Posts: 569	Re: My YSR 200 4 Stroke build! They come with bearings, hes going to order waves front and rear. Dosent come with spacers.

02-24-2008, 06:10 PM	#37 (permalink)
shawnbassett26 2nd Gear Member Join Date: Feb 2008 Location: Orlando FL Posts: 569	Re: My YSR 200 4 Stroke build! A few new pics. Sorry if the pics are not that great, took my my phone. 3 spokes. Going to sand blast them and take them to the powder coater this week.

02-24-2008, 06:14 PM	#38 (permalink)
shawnbassett26 2nd Gear Member Join Date: Feb 2008 Location: Orlando FL Posts: 569	Re: My YSR 200 4 Stroke build! Swingarm. I had to drill out the stock frame mount because the nsr it took a slightly larger bolt. Im going to order a rear brake asy when i get back to work on tuesday. I have new bearings/spacers/adjusters also.

02-24-2008, 06:19 PM	#39 (permalink)
shawnbassett26 2nd Gear Member Join Date: Feb 2008 Location: Orlando FL Posts: 569	Re: My YSR 200 4 Stroke build! Im still going to use the YSR forks, i tried to use NSR forks tripple. It just wasnt going to work. So im going to get a NSR front brake/bracket and make and adapter. Im going to order a NSF100 rotor on tuesday as well. I had to drill out the legs because the NSR has a lorger axle. Worked out really well.

02-24-2008, 06:40 PM	#40 (permalink)
firepower354 3rd Gear Member Join Date: Oct 2006 Location: Flint MI Posts: 5,613	Re: My YSR 200 4 Stroke build! Interested in selling the stock YSR wheels??? To a fellow PM member? For a smokin' deal???