Planet Minis

shawnbassett26 · 06-05-2008, 07:50 PM

Thanks bob for letting be barrow your welder! I might need some help with the RS tail..... Chris should be getting his wheels next week. Need to go for a good ride. Thanks again,
~Shawn

YSR50 · 06-14-2008, 10:25 PM

nice work, looking forward to seeing the finished ride

shawnbassett26 · 06-15-2008, 10:58 AM

Just doing a little body work to get it 100% perfect to paint. Soon my friends......
~Shawn

shawnbassett26 · 06-22-2008, 07:57 PM

Small up date...

Just got all the bodywork out of the way, primed, and wet sanded today (haven't had the time lately). Ill drop the body and tank off tomorrow to get it sprayed (at least thats the plan).

Just got a Brembo* master cylinder with folding lever! Haven't put it on yet but its made for a single caliper.

Fork brace on the way (much needed)

New rear sprocket made (went to 39T form 41) much better when cruising and will get me over 100+ MPH now.

New clutch.

Mainly nic nac parts.... Still trying to find a nice used aftermarket NSR shock, saving my money for a +2 G-Craft swing arm. Ill be working on and inverted front end soon and some nice brakes. Other than that just riding it every day! Turns heads every where i go. Me and chris took our minis to bike night (which is HUGE in JAX). I was beating people off with a stick. The only bad parts is the first thing people ask is "where did you buy that pocket bike"

But i do get a lot of respect from people who know who much work i have into it. More pics soon, stay tuned.
~Shawn

1TrikZB · 06-23-2008, 06:38 AM

Quote:

Originally Posted by YSR50

nice work, looking forward to seeing the finished ride

Hey, another Doraemon helmet!

peace,
bobbyV

supernes550 · 06-23-2008, 10:37 AM

Quote:

Originally Posted by shawnbassett26

saving my money for a +2 G-Craft swing arm. Ill be working on and inverted front end soon and some nice brakes.

will it be an nsr swinger? how does it match up to the ysr frame?

FourDoor · 06-23-2008, 10:54 AM

Quote:

Originally Posted by shawnbassett26

Me and chris took our minis to bike night (which is HUGE in JAX). I was beating people off with a stick. The only bad parts is the first thing people ask is "where did you buy that pocket bike"

But i do get a lot of respect from people who know who much work i have into it.

That tells you who the atypical new rider is vs. someone who knows whats going on. I'm sure by the end of the night you have some very jealous onlookers/fans.

What's the paint scheme you are planning on spraying on the bike?

shawnbassett26 · 06-23-2008, 11:46 AM

"will it be an nsr swinger? how does it match up to the ysr frame?"

Yes. I had to drill out the swingarm bolt holes on the ysr frame (nsr swingarm axle is wider). I had to make a new mount on the frame to accept the NSR shock. Other than that its just as wide.

"That tells you who the atypical new rider is vs. someone who knows whats going on. I'm sure by the end of the night you have some very jealous onlookers/fans."

Yeah we had alot of people asked how much we would see them for... they didnt like the price.

"What's the paint scheme you are planning on spraying on the bike?"

Pics soon.......

shawnbassett26 · 06-24-2008, 02:59 PM

Dropped the body off for paint today!
~Shawn

FourDoor · 06-24-2008, 03:47 PM

OK, give us one hint on one of the colors you'll be using.

shawnbassett26 · 06-24-2008, 04:24 PM

A dash of black..........
~Shawn

shawnbassett26 · 07-01-2008, 08:46 PM

A few new parts today. They are Carbon fiber frame gussets. Makes that area look alot better. Not 100% on the red carbon, turned out darker than i expected.... They may just go gloss black. Body will be on soon!

~Shawn

shawnbassett26 · 07-01-2008, 08:48 PM

Also got a fork brace and adjustable clip-ons. Ill have them powder coted black soon.

My bike is in Midsize of the month..... Looks like im agents the worlk (MXers). if you a fan any help would be great!
~Shawn

fatcaaat · 07-01-2008, 08:57 PM

YOu surprise me with that carb. You've got such an awesome bike and you did some work to the mill. Why are you running such a crap carb? Its like 175 pounds of dynomite with a quarter inch fuse.

Get a Mikuni downdraft or flatslide on there...TM32 or FCR32. It will make a world of difference.

shawnbassett26 · 07-01-2008, 09:04 PM

I know.... you have been on be from the start...... Ill get one soon. i promise! Belive it or not the bike runs really great. I know it will run alot better with a flat slide. Ill try to get one next week. Thanks for the great info.
~Shawn

cdiaz3 · 07-02-2008, 10:16 AM

I voted for you shawn!! Gotta help out my YSR buds, right?

Though I think that cole guy is gonna woop ass.

shawnbassett26 · 07-02-2008, 10:24 AM

Looks like im going to get destroied! Thanks for the vote!
~Shawn

FourDoor · 07-02-2008, 12:12 PM

That CF cover does make the frame look cleaner.

I voted for you but daym we need more of the YSR/NSR folks to vote!

shawnbassett26 · 07-02-2008, 03:17 PM

Thanks 4door for the vote!
~Shawn

Pitbiker888 · 07-02-2008, 03:35 PM

thats a great bike!
i like it

06-05-2008, 07:50 PM	#241 (permalink)
shawnbassett26 2nd Gear Member Join Date: Feb 2008 Location: Orlando FL Posts: 669	Re: My YSR 200 4 Stroke build! Thanks bob for letting be barrow your welder! I might need some help with the RS tail..... Chris should be getting his wheels next week. Need to go for a good ride. Thanks again, ~Shawn

06-14-2008, 10:25 PM	#242 (permalink)
YSR50 PM Newbie Join Date: Sep 2006 Posts: 1	Re: My YSR 200 4 Stroke build! nice work, looking forward to seeing the finished ride

06-15-2008, 10:58 AM	#243 (permalink)
shawnbassett26 2nd Gear Member Join Date: Feb 2008 Location: Orlando FL Posts: 669	Re: My YSR 200 4 Stroke build! Just doing a little body work to get it 100% perfect to paint. Soon my friends...... ~Shawn

06-22-2008, 07:57 PM	#244 (permalink)
shawnbassett26 2nd Gear Member Join Date: Feb 2008 Location: Orlando FL Posts: 669	Re: My YSR 200 4 Stroke build! Small up date... Just got all the bodywork out of the way, primed, and wet sanded today (haven't had the time lately). Ill drop the body and tank off tomorrow to get it sprayed (at least thats the plan). Just got a Brembo* master cylinder with folding lever! Haven't put it on yet but its made for a single caliper. Fork brace on the way (much needed) New rear sprocket made (went to 39T form 41) much better when cruising and will get me over 100+ MPH now. New clutch. Mainly nic nac parts.... Still trying to find a nice used aftermarket NSR shock, saving my money for a +2 G-Craft swing arm. Ill be working on and inverted front end soon and some nice brakes. Other than that just riding it every day! Turns heads every where i go. Me and chris took our minis to bike night (which is HUGE in JAX). I was beating people off with a stick. The only bad parts is the first thing people ask is "where did you buy that pocket bike" But i do get a lot of respect from people who know who much work i have into it. More pics soon, stay tuned. ~Shawn

06-23-2008, 11:46 AM	#248 (permalink)
shawnbassett26 2nd Gear Member Join Date: Feb 2008 Location: Orlando FL Posts: 669	Re: My YSR 200 4 Stroke build! "will it be an nsr swinger? how does it match up to the ysr frame?" Yes. I had to drill out the swingarm bolt holes on the ysr frame (nsr swingarm axle is wider). I had to make a new mount on the frame to accept the NSR shock. Other than that its just as wide. "That tells you who the atypical new rider is vs. someone who knows whats going on. I'm sure by the end of the night you have some very jealous onlookers/fans." Yeah we had alot of people asked how much we would see them for... they didnt like the price. "What's the paint scheme you are planning on spraying on the bike?" Pics soon.......

06-24-2008, 02:59 PM	#249 (permalink)
shawnbassett26 2nd Gear Member Join Date: Feb 2008 Location: Orlando FL Posts: 669	Re: My YSR 200 4 Stroke build! Dropped the body off for paint today! ~Shawn

06-24-2008, 03:47 PM	#250 (permalink)
FourDoor 2nd Gear Member Join Date: Jul 2004 Location: San Jose, CA Posts: 277	Re: My YSR 200 4 Stroke build! OK, give us one hint on one of the colors you'll be using.

06-24-2008, 04:24 PM	#251 (permalink)
shawnbassett26 2nd Gear Member Join Date: Feb 2008 Location: Orlando FL Posts: 669	Re: My YSR 200 4 Stroke build! A dash of black.......... ~Shawn

07-01-2008, 08:46 PM	#252 (permalink)
shawnbassett26 2nd Gear Member Join Date: Feb 2008 Location: Orlando FL Posts: 669	Re: My YSR 200 4 Stroke build! A few new parts today. They are Carbon fiber frame gussets. Makes that area look alot better. Not 100% on the red carbon, turned out darker than i expected.... They may just go gloss black. Body will be on soon! ~Shawn

07-01-2008, 08:48 PM	#253 (permalink)
shawnbassett26 2nd Gear Member Join Date: Feb 2008 Location: Orlando FL Posts: 669	Re: My YSR 200 4 Stroke build! Also got a fork brace and adjustable clip-ons. Ill have them powder coted black soon. My bike is in Midsize of the month..... Looks like im agents the worlk (MXers). if you a fan any help would be great! ~Shawn

07-01-2008, 08:57 PM	#254 (permalink)
fatcaaat 3rd Gear Member Join Date: Sep 2004 Location: Arlington, VA Posts: 2,965	Re: My YSR 200 4 Stroke build! YOu surprise me with that carb. You've got such an awesome bike and you did some work to the mill. Why are you running such a crap carb? Its like 175 pounds of dynomite with a quarter inch fuse. Get a Mikuni downdraft or flatslide on there...TM32 or FCR32. It will make a world of difference.

07-01-2008, 09:04 PM	#255 (permalink)
shawnbassett26 2nd Gear Member Join Date: Feb 2008 Location: Orlando FL Posts: 669	Re: My YSR 200 4 Stroke build! I know.... you have been on be from the start...... Ill get one soon. i promise! Belive it or not the bike runs really great. I know it will run alot better with a flat slide. Ill try to get one next week. Thanks for the great info. ~Shawn

07-02-2008, 10:16 AM	#256 (permalink)
cdiaz3 PM Newbie Join Date: Feb 2008 Location: Miami, FL Posts: 24	Re: My YSR 200 4 Stroke build! I voted for you shawn!! Gotta help out my YSR buds, right? Though I think that cole guy is gonna woop ass.

07-02-2008, 10:24 AM	#257 (permalink)
shawnbassett26 2nd Gear Member Join Date: Feb 2008 Location: Orlando FL Posts: 669	Re: My YSR 200 4 Stroke build! Looks like im going to get destroied! Thanks for the vote! ~Shawn

07-02-2008, 12:12 PM	#258 (permalink)
FourDoor 2nd Gear Member Join Date: Jul 2004 Location: San Jose, CA Posts: 277	Re: My YSR 200 4 Stroke build! That CF cover does make the frame look cleaner. I voted for you but daym we need more of the YSR/NSR folks to vote!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

07-02-2008, 03:17 PM	#259 (permalink)
shawnbassett26 2nd Gear Member Join Date: Feb 2008 Location: Orlando FL Posts: 669	Re: My YSR 200 4 Stroke build! Thanks 4door for the vote! ~Shawn

07-02-2008, 03:35 PM	#260 (permalink)
Pitbiker888 PM Newbie Join Date: Jun 2008 Location: Germany Posts: 4	Re: My YSR 200 4 Stroke build! thats a great bike! i like it