Planet Minis

jmsmilin · 01-14-2007, 05:36 PM

Quote:

Originally Posted by Salad_Finger

Nah , they're like 30 bucks a piece. Talk to matt tastic. he could probably get you some.

do you have an email or link?

Wheres everyone get the foot pegs for the rear???

ffRich · 01-14-2007, 09:37 PM

Quote:

Originally Posted by jmsmilin

do you have an email or link?

Wheres everyone get the foot pegs for the rear???

The rear pegs that most people are using come from 50stunt.com

Salad_Finger · 01-15-2007, 06:51 PM

You can drill a 3/4 inch hole in your swingarm and run a bolt through the backside and use a standard bicycle peg. Thats what I did.

jmsmilin · 01-15-2007, 09:13 PM

Quote:

Originally Posted by Salad_Finger

You can drill a 3/4 inch hole in your swingarm and run a bolt through the backside and use a standard bicycle peg. Thats what I did.

and the chain is still adjustable-got pics, I dont get it...

Salad_Finger · 01-16-2007, 05:47 AM

Nope, dont have pics. Just drill in the flat part of the swingarm about 3/4 inch above the axle. Slip the bolt through the inside of the swingarm. The bolt will be pointing on the outside. Slip the peg over the bolt and thread a nut and you're in buisness.

jmsmilin · 01-16-2007, 05:11 PM

that makes sense now, I was wondering where you were drilling on the swinger, didnt sound to safe, they are weak enuf as it is

slowkid6 · 01-16-2007, 05:43 PM

all are nice bikes

general_lee01 · 01-16-2007, 05:48 PM

i agree

tecdady · 01-20-2007, 10:09 AM

heres my mamajama... got the 88cc big bore/race head kit, just havent put it on yet as well as some black rims going on. shes got a rev box, 4.1 exhaust, 50 stunt pegs, and rear hand brake, two bros full big bar kit, sano seat on and the vent cap! ha. loads of fun, and it only cost more than my 2k2 cr250.. go figure heh.

john-k · 01-20-2007, 11:36 AM

heres mine, hopefully i ll have some action pic's this weekend. but this is it for now.

NYYSR · 01-21-2007, 10:32 PM

Quote:

Originally Posted by john-k

heres mine, hopefully i ll have some action pic's this weekend. but this is it for now.

dude i love your bike its sick looking............man you gave me a few ideas lol

turboglenn · 01-21-2007, 10:43 PM

or do what i did and get oversized BMX pegs and remove the adjusters and weld 10mm bolts to them to use as adjusters

here's a pic

Wurms · 01-23-2007, 05:31 PM

Very cool! ^^^

yamaha · 01-23-2007, 05:36 PM

i did that but kept the chain adjuster

btracer02 · 01-23-2007, 08:51 PM

heres my friends.. the black/pink one... but he leaves it at my house 24/7 lol

^^ i did the same thing with the pegs my bike too hah, works great

jmsmilin · 01-24-2007, 07:14 PM

so howd you do those fornt pegs? pink...hmm

filthyboatguy · 01-24-2007, 07:34 PM

Well I intended it to be a stunter, but it just sits in the garage now, unused

It's for sale.........but man does it wheelie

NYYSR · 01-24-2007, 08:12 PM

how mush, just curious.

filthyboatguy · 01-24-2007, 08:31 PM

Quote:

Originally Posted by NYYSR

how mush, just curious.

$1500.

btracer02 · 01-24-2007, 09:05 PM

Quote:

Originally Posted by jmsmilin

so howd you do those fornt pegs? pink...hmm

front wheels are just bmx pegs too, just threw them on the axle and tightened it down lol

yea the pinks a lil gay but its not my bike hah

01-15-2007, 06:51 PM	#43 (permalink)
Salad_Finger PM Newbie Join Date: Feb 2006 Posts: 94	You can drill a 3/4 inch hole in your swingarm and run a bolt through the backside and use a standard bicycle peg. Thats what I did.

01-16-2007, 05:47 AM	#45 (permalink)
Salad_Finger PM Newbie Join Date: Feb 2006 Posts: 94	Nope, dont have pics. Just drill in the flat part of the swingarm about 3/4 inch above the axle. Slip the bolt through the inside of the swingarm. The bolt will be pointing on the outside. Slip the peg over the bolt and thread a nut and you're in buisness.

01-16-2007, 05:11 PM	#46 (permalink)
jmsmilin PM Newbie Join Date: Jan 2007 Location: GA Posts: 59	that makes sense now, I was wondering where you were drilling on the swinger, didnt sound to safe, they are weak enuf as it is

01-16-2007, 05:43 PM	#47 (permalink)
slowkid6 3rd Gear Member Join Date: Nov 2006 Location: arkansas Posts: 2,581 Awards Showcase Total Awards: 1	all are nice bikes

01-16-2007, 05:48 PM	#48 (permalink)
general_lee01 2nd Gear Member Join Date: Dec 2006 Location: OHIO Posts: 449	i agree

01-20-2007, 10:09 AM	#49 (permalink)
tecdady PM Newbie Join Date: Dec 2006 Posts: 42	heres my mamajama... got the 88cc big bore/race head kit, just havent put it on yet as well as some black rims going on. shes got a rev box, 4.1 exhaust, 50 stunt pegs, and rear hand brake, two bros full big bar kit, sano seat on and the vent cap! ha. loads of fun, and it only cost more than my 2k2 cr250.. go figure heh.

01-20-2007, 11:36 AM	#50 (permalink)
john-k 2nd Gear Member Join Date: Sep 2006 Location: Lake Tapps,Wa Posts: 513	heres mine, hopefully i ll have some action pic's this weekend. but this is it for now.

01-21-2007, 10:43 PM	#52 (permalink)
turboglenn 3rd Gear Member Join Date: Jul 2005 Location: Omaha, NE Posts: 1,928	or do what i did and get oversized BMX pegs and remove the adjusters and weld 10mm bolts to them to use as adjusters here's a pic

01-23-2007, 05:31 PM	#53 (permalink)
Wurms 3rd Gear Member Join Date: Jan 2007 Location: 6" under, LA Posts: 1,887	Very cool! ^^^

01-23-2007, 05:36 PM	#54 (permalink)
yamaha 3rd Gear Member Join Date: Jul 2006 Location: locust grove, va Posts: 2,056	i did that but kept the chain adjuster

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

01-23-2007, 08:51 PM	#55 (permalink)
btracer02 2nd Gear Member Join Date: Jan 2005 Location: state college, pa coatesville, pa Posts: 569	heres my friends.. the black/pink one... but he leaves it at my house 24/7 lol ^^ i did the same thing with the pegs my bike too hah, works great

01-24-2007, 07:14 PM	#56 (permalink)
jmsmilin PM Newbie Join Date: Jan 2007 Location: GA Posts: 59	so howd you do those fornt pegs? pink...hmm

01-24-2007, 07:34 PM	#57 (permalink)
filthyboatguy 3rd Gear Member Join Date: Oct 2004 Location: San Diego, CA Posts: 4,780	Well I intended it to be a stunter, but it just sits in the garage now, unused It's for sale.........but man does it wheelie

01-24-2007, 08:12 PM	#58 (permalink)
NYYSR 2nd Gear Member Join Date: Jul 2004 Location: longisland new york Posts: 417	how mush, just curious.