Planet Minis - View Single Post - Import Motor FAQ

Z50King · 12-27-2006, 12:44 AM

i have some info on the Loncin 107(called a 110) 3 valve engine.

VIN id numbers:

#.) VIN= engine id
1.2.) LC= Loncin
3.) 1= single cylinder
4.5.) 52= rounded off for bore size of 52
and then i think the rest of it is all engine# from the run

mine says on the Ohalee website that its a 52.4x49.5

it is a 3 valve with two intakes and 1 exhaust.
also has a left-side cam chain and sprocket.

Identifying marks are:

"Loncin" on the left-side cover, as well as "Designed in Japan" curved underneath it.
"3valve" on both the upper tappet and the cam side cover

ill post some more specs if i take it apart

12-27-2006, 12:44 AM	#18 (permalink)
Z50King Almost Banned Join Date: Sep 2004 Location: Upland, Ca MSAC Posts: 6,641	i have some info on the Loncin 107(called a 110) 3 valve engine. VIN id numbers: #.) VIN= engine id 1.2.) LC= Loncin 3.) 1= single cylinder 4.5.) 52= rounded off for bore size of 52 and then i think the rest of it is all engine# from the run mine says on the Ohalee website that its a 52.4x49.5 it is a 3 valve with two intakes and 1 exhaust. also has a left-side cam chain and sprocket. Identifying marks are: "Loncin" on the left-side cover, as well as "Designed in Japan" curved underneath it. "3valve" on both the upper tappet and the cam side cover ill post some more specs if i take it apart Last edited by Z50King; 01-11-2007 at 01:11 AM.