Planet Minis

techone · 08-03-2008, 08:44 PM

Quote:

Originally Posted by 5150 Racing

Yeah thats not even motor oil haha its like cooking oil from pf changs

ive seen people run that stuff for 3000 miles

it not even funny how nasty it is

ROBINSONDB22 · 08-03-2008, 08:55 PM

it doesn't even burn... I've tried

F U Al Gore!

5150 Racing · 08-03-2008, 09:00 PM

Quote:

Originally Posted by ROBINSONDB22

it doesn't even burn... I've tried

F U Al Gore!

haha yeah, watch out for manbearpig ( global warming) Whats next, eco-friendly nukes?

ROBINSONDB22 · 08-03-2008, 09:04 PM

have you seen the eco-friendly nukes? when they explode they spread tree seeds in a 5 mile radius

techone · 08-03-2008, 09:05 PM

your kidding me? lmfao

ROBINSONDB22 · 08-03-2008, 09:07 PM

yes i am kidding... i hate hippies

5150 Racing · 08-03-2008, 09:22 PM

since were talking eco friendly ( hippie crap) what are they putting in the gas now days? I know e85 ethanol is supposed to burn cleaner but it seems like my carb gets a crap load of deposits if i let it sit with gas more than a week.

ROBINSONDB22 · 08-03-2008, 09:43 PM

I dunno but why does your bike sit for more than a week? That's what you should be worried about!!!!!!

techone · 08-03-2008, 09:48 PM

Quote:

Originally Posted by ROBINSONDB22

I dunno but why does your bike sit for more than a week? That's what you should be worried about!!!!!!

hahahahaha

5150 Racing · 08-03-2008, 11:47 PM

Quote:

Originally Posted by ROBINSONDB22

I dunno but why does your bike sit for more than a week? That's what you should be worried about!!!!!!

haha yeah, very true. I had it sitting for a week while i was in oklahoma, then for another week when i went to vegas... the damn thing wont fit in my suitcase and the lady wouldnt let me carry it on the plane... i told her that i would keep it under the seat but she wouldnt go for it. I bet south west would have let me

5150 Racing · 08-04-2008, 10:56 PM

I finally got my engine and it came with a lot of crap.
oil cooler
dress up kit
steel braided oil lines
steel braided clutch cable
steel braided throttle cable
air filter
coil
shifter
kick starter
hose clamps
moklt carb( ad said 28mm but it looks like a 24)
Intake manifold with spacers and gaskets
killswitch
428 drive sprocket
seems like a great deal so far. I dont know what kind of exhaust this is though. My crf50 pipe bolts up but the bends in it are way off, what do i do, go custom?

357 Racing · 08-04-2008, 11:04 PM

Get an adaptor.

5150 Racing · 08-05-2008, 12:42 AM

Quote:

Originally Posted by crf150r

Get an adaptor.

can you send me the link or show me where i can get an adapter? I have looked all over for that ncc adapter and i cant find the damn thing.

jtblueberry · 08-05-2008, 01:31 AM

call him... or pm?

crzkill8 · 08-05-2008, 06:44 AM

talk to vince at tboltusa.com they have them in stock just order one myself.

bf519 · 08-05-2008, 10:18 AM

ince is the MAN

Jason Pratt · 08-05-2008, 11:20 AM

Quote:

Originally Posted by 5150 Racing

I finally got my engine and it came with a lot of crap.
oil cooler
dress up kit
steel braided oil lines
steel braided clutch cable
steel braided throttle cable
air filter
coil
shifter
kick starter
hose clamps
moklt carb( ad said 28mm but it looks like a 24)
Intake manifold with spacers and gaskets
killswitch
428 drive sprocket
seems like a great deal so far. I dont know what kind of exhaust this is though. My crf50 pipe bolts up but the bends in it are way off, what do i do, go custom?

You have the YX150 with the KLX type intake ports. Your going to have to run a 110 bend exhaust or you can try to fabricate the existing pipe. Also there is the adaptor from NCC i believe you can use too!

Pax Racing Tanya · 08-05-2008, 11:26 AM

Quote:

Originally Posted by Jason Pratt

You have the YX150 with the KLX type intake ports. Your going to have to run a 110 bend exhaust or you can try to fabricate the existing pipe. Also there is the adaptor from NCC i believe you can use too!

That motor is a klx port.

5150 Racing · 08-06-2008, 11:58 PM

Thanks. Im using a stock klx 110 pipe to see how the bends and everything go, then im going to a muffler place and having some 1 1/2 or 1 1/4 bent so i can make a custom pipe. I dont know what muffler i will be using.. maybe my old fmf powercore or my white bros muffler. The exhaust port seems to be a bit small or a 150 though... any tips on how big to go on tubing for my exhaust?

techone · 08-08-2008, 06:54 PM

4in semi tractor trailer exaust tubing should be fine

08-03-2008, 08:55 PM	#22 (permalink)
ROBINSONDB22 3rd Gear Member Join Date: Feb 2007 Location: The Dark Side of Eternia Posts: 2,024	Re: YX 150 Thread it doesn't even burn... I've tried F U Al Gore!

08-03-2008, 09:04 PM	#24 (permalink)
ROBINSONDB22 3rd Gear Member Join Date: Feb 2007 Location: The Dark Side of Eternia Posts: 2,024	Re: YX 150 Thread have you seen the eco-friendly nukes? when they explode they spread tree seeds in a 5 mile radius

08-03-2008, 09:05 PM	#25 (permalink)
techone PM Newbie Join Date: Jul 2008 Posts: 39	Re: YX 150 Thread your kidding me? lmfao

08-03-2008, 09:07 PM	#26 (permalink)
ROBINSONDB22 3rd Gear Member Join Date: Feb 2007 Location: The Dark Side of Eternia Posts: 2,024	Re: YX 150 Thread yes i am kidding... i hate hippies

08-03-2008, 09:22 PM	#27 (permalink)
5150 Racing PM Newbie Join Date: Jul 2008 Location: Roseville, CA Posts: 49	Re: YX 150 Thread since were talking eco friendly ( hippie crap) what are they putting in the gas now days? I know e85 ethanol is supposed to burn cleaner but it seems like my carb gets a crap load of deposits if i let it sit with gas more than a week.

08-03-2008, 09:43 PM	#28 (permalink)
ROBINSONDB22 3rd Gear Member Join Date: Feb 2007 Location: The Dark Side of Eternia Posts: 2,024	Re: YX 150 Thread I dunno but why does your bike sit for more than a week? That's what you should be worried about!!!!!!

08-04-2008, 10:56 PM	#31 (permalink)
5150 Racing PM Newbie Join Date: Jul 2008 Location: Roseville, CA Posts: 49	Re: YX 150 Thread I finally got my engine and it came with a lot of crap. oil cooler dress up kit steel braided oil lines steel braided clutch cable steel braided throttle cable air filter coil shifter kick starter hose clamps moklt carb( ad said 28mm but it looks like a 24) Intake manifold with spacers and gaskets killswitch 428 drive sprocket seems like a great deal so far. I dont know what kind of exhaust this is though. My crf50 pipe bolts up but the bends in it are way off, what do i do, go custom? Last edited by 5150 Racing; 08-04-2008 at 10:58 PM. Reason: html

08-04-2008, 11:04 PM	#32 (permalink)
357 Racing 3rd Gear Member Join Date: Dec 2006 Location: Austin, Texas Posts: 2,897	Re: YX 150 Thread Get an adaptor.

08-05-2008, 01:31 AM	#34 (permalink)
jtblueberry 2nd Gear Member Join Date: Apr 2008 Location: Pismo Beach, CA Posts: 459	Re: YX 150 Thread call him... or pm?

08-05-2008, 06:44 AM	#35 (permalink)
crzkill8 1st Gear Member Join Date: May 2008 Location: Fort Myers, Florida Posts: 138	Re: YX 150 Thread talk to vince at tboltusa.com they have them in stock just order one myself.

08-05-2008, 10:18 AM	#36 (permalink)
bf519 1st Gear Member Join Date: Jun 2005 Posts: 188	Re: YX 150 Thread ince is the MAN

08-06-2008, 11:58 PM	#39 (permalink)
5150 Racing PM Newbie Join Date: Jul 2008 Location: Roseville, CA Posts: 49	Re: YX 150 Thread Thanks. Im using a stock klx 110 pipe to see how the bends and everything go, then im going to a muffler place and having some 1 1/2 or 1 1/4 bent so i can make a custom pipe. I dont know what muffler i will be using.. maybe my old fmf powercore or my white bros muffler. The exhaust port seems to be a bit small or a 150 though... any tips on how big to go on tubing for my exhaust?

08-08-2008, 06:54 PM	#40 (permalink)
techone PM Newbie Join Date: Jul 2008 Posts: 39	Re: YX 150 Thread 4in semi tractor trailer exaust tubing should be fine

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)